Pipe cutting - Import export

Applications of structural steel hollow sections include hoists, frame structures, and beams and columns. With structural steel hollow sections, you can significantly reduce the weight of your steel structures and achieve savings in material and manufacturing costs – without limiting freedom in design.

Tubes made of aluminum offer various advantages, such as corrosion resistance, low weight and high stability. Aluminum tubes are very durable and can be recycled without loss of quality. A wide variety of constructions can be realized with tubes made of aluminum.

Whether chassis applications with high dynamic stress and safety-relevant functions or lightweight solutions for the highest crash requirements. Our claim is to find the technically and economically best solution for your individual requirements

Created for precision. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can then be directly processed further and for instance be formed straight afterwards. That saves time and money.

Stainless steel tubes have become an indispensable part of everyday life. We hold onto them on the bus or use them as railings in houses. In the furniture industry, stainless steel tubes are used as wardrobe rods and as components for furniture. In their largest form, they serve as pipelines for oil and gas.

There are many good reasons to separate tubes chiplessly. And first of all, of course, the cleanliness. Precision and output, too, are not insignificant. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can be formed immediately afterwards. That saves time and money. Technical specifications: Separation efficiency: max. Ø 80 x 3 mm Shortest separation length: - 70 mm (without pull apart) - 100 mm (with pull apart) Cycle time: 5-10 sec. (depending on material, diameter, wall thickness and cutting length)

There are many good reasons to separate tubes chiplessly. And first of all, of course, the cleanliness. Precision and output, too, are not insignificant. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can be formed immediately afterwards. That saves time and money. Technical specifications: Separation efficiency: max. Ø 105 x 3 mm Shortest separation length: - 100 mm (without pull apart) - 170 mm (with pull apart) Cycle time: 5-10 sec. (depending on material, diameter, wall thickness and cutting length)

There are many good reasons to separate tubes chiplessly. And first of all, of course, the cleanliness. Precision and output, too, are not insignificant. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can be formed immediately afterwards. That saves time and money. Technical specifications: Separation efficiency: max. Ø 50,8 x 2,5 mm Shortest separation length: - 25 mm (without pull apart) - 55 mm (with pull apart) Separation efficiency: up to 2,000 pcs per hour

The OPTISONIC 6300 P is a portable, battery-powered ultrasonic clamp-on flowmeter for temporary flow measurement of (non-)conductive liquids. It can be used at virtually any location and without process interruption or need to cut pipes. Due to its flexibility, the meter is equally suited for comparative measurements on stationary measuring equipment (e.g. pumps, flowmeters etc.) or for use as a short-term replacement of faulty devices. The OPTISONIC 6300 P consists of a combination of one or two clamp-on sensors and one handheld electronic signal converter. The robust clamp-on rail can be easily attached to almost any pipe up to DN1500/160". The readings of the meter are shown on the handheld LCD and are stored in the integrated memory for data logging. In addition, all readings can be transferred to a PC via the included USB stick in order to further analyse or store the data.

Cellular wheel sluices Cellular wheel sluices are used as discharge devices under filters, cyclones and silos, as well as for channelling materials into pneumatic conveying systems. In a special tested version, however, these can also be used at the same time for the explosive decoupling of complex plant systems in the sense of the ATEX regulations. Multi-cutter The multi-cutter is ideally suited for the chopping up of paper or plastic waste strips as well as veneer residues in extraction pipes. It works with a set of fast-rotating, but air-permeable blades. The connection diameter is DN 160 and the motor has a rated drive power of 0.75 KW. In order to be able to definitely assess the usability for the application, it is advisable to provide us with representative material samples. The assessment is also often proven by pilot plant trials. The advantage of this is that the degree of chopping can also be determined. ATEX non-return valves (EX) Non-return valves are passive decoupling elements in pipelines for preventing dust explosion effects from running in the opposite direction to the conveying direction. The non-return valves are type-tested protective systems in accordance with directive 94/9/EC, better known under the synonym ATEX 95. Function In normal operation, the top-mounted flap swims on the air stream in the housing of the non-return valve and in this way is held open. At a standstill the valve flap closes under its own weight and rests on the diagonally cut inflow pipe. If an explosion occurs behind the non-return valve, the air flow direction is reversed due to the increased counter-pressure. This causes the flap to close. The valve flap is additionally pressed against the inflow pipe by the pressure of the explosion, thus reliably sealing the pipeline against an explosion backdraught. These non-return valves function without external energy. The RSK and BPF-M series are available in the sizes DN 160, 200, 250, 280, 315, 355, 400, 450, 500, 560, 600, 630, 710, 800, 900 and 1,000. The two series differ in that they have different versions and application possibilities. The non-return valves, as type-tested protective systems, are sold through Brilex Gesellschaft für Explosionsschutz mbH, Hinterm Gallberg 15-17, D-59929 Brilon; www.brilex.de

Technical plastics for industry are a further speciality of IBK. We produce plastic parts to your specifications (ISO, CAD, drawing) for all temperature ranges and with specific chemical resistance. Whether unusual, complex or just simple forms – we turn, inject, saw, drill or mill, whatever you require. We supply semi-finished products as round bars, plates, pipes, rods, profiles or individual cuts, rolls, rollers or wheels with or without coating. Furthermore finished parts, such as protective systems for safety at the workplace in electronic applications. We process all types of plastic, from polyamide to hard PVC through to GRP/FRP. Semi-finished parts: Plates, Blocks, Full rods, Hollow rods, Pipes, Cut pieces Finished parts Cut and processed (turned, milled, drilled etc.) to drawing, sketch or sample, such as - Wheels, Rollers, Bearing bushes, Thrust rings, Bands, Sleeves, Strips