Perforated plates - Import export

secutex Impact Protection for screwing This is our top seller – secutex buffer pad with a perforated plate. Easy and flexible to use and can be fixed reliably with the perforated plate as reinforcement. In this way, you will have a universal impact protection in a short time. Size and quantity of the drill holes depend on the substructure and must be specified on site. Selection of the screws We recommend screw sizes up to a maximum of 6mm, any larger dimension does not provide additional strength in combination with the castin perforated plate. As screws we recommend hexagon socket screws with low head according to DIN 7984 or DIN 6912. Not recommended Countersunk screws; inefficient transfer of the force into the impact protection, Bolts with hexagon head; the nut grips the bolt on the outside, the borehole must be much larger for this. Normal screws with hexagon socket; the screw head is significantly higher, the impact protection must be thicker

secutex buffer pad with internal perforated plate can be bolted and riveted in various ways. Thus you can achieve universal buffer pad at the drop of a hat.

Often welding is the easiest and quickest means of attachment. The various overlapping perforated plate designs enable a wide range of applications. Please note the mounting options and welding instructions!

The design offers optimal protection to goods that stick out from the edges of the palette, for example. The secutex coating is inseparably connected to the fork shank. The perforated plate prevents the fork prongs from detaching.

secutex impact protection with elbowdesign and inboard perforated plate are mounted when protection must also extend around the corner. The impact protection elbows can be manufactured to be isosceles as well as asymmetrical.

The noise levels in pipe and rod raising systems can be very high. A chute lined with secutex pipe modules ensures that noise levels are reduced and that surfaces are protected. The secutex material with inset perforated plates is particularly wearresistant and cushions the movement of pipes and rods very well. The cast sections are attached using drilled attachment holes. Segment sizes and joins are manufactured according to client requests.

secutex prongs are selected when products and good must be securely and carefully transported on a consistent basis. The design offers optimal load and liftingdevice protection in situations with limited space. The secutex resistant coating is inseparably connected to the fork prongs and the perforated plate prevents the fork prongs from detaching. A crossbeam on the tip of the fork prong prevents the secutex coating from detaching.

For particularly heavy loads, normal secutex protective sleeves can only be used for larger edge radii because the heavyload round slings under load are up to 80 mm thick. According to the technical definition, this creates a “sharp edge“. Both the loadbearing round slings as well as the protective sleeve will be destroyed by the forces which occur here. The secuwave edge protector increases the load’s edge radius. The wave profile helps the edge protector adapt to the load. The castin perforated plate then permanently keeps the shape. The additional secutex protective sleeve reliably prevents the edge protector from moving through the heavyload round sling. Possible applications bridge elements, machinery, gear segments etc.

Plastic for welding … Welding is often the simplest and best way of fastening. The range of different perforated plates offers a wide range of applications. Size and quantity of the welding joints depend on the substructure and must be defined on site. Please note that the perforated metal sheet can under no circumstances take over any static functions. The secutex buffer pad is simply disconnected by grinding away the welding spots. These are the advantages Simply weld onto the item to be welded No need for repeatable holes in the workpiece No holes in the secutex impact protection material Applications On all metal surfaces On thin metal walls Everywhere where screwing is not possible or screw holes are unwanted Examples Collecting basins Ramp protection metal boxes Container Forklift Gripper Girder protection Pallet truck 1. Perforated metal sheet, overhang at the side This version is suitable for welding onto flat surfaces and extrawide profiles of construction steel.

Install impact protection For screwing and riveting secutex impact protection with an internal perforated plate can be screwed or riveted in different ways. You can achieve universal impact protection in no time at all. For welding Welding is often the easiest and fastest way of fastening. The various protruding perforated sheet designs allow a very versatile use. For gluing If screwing or welding is not possible, the impact protection can be glued with the secutex special adhesive. Cutting and sawing The secutex material can be sawed with a conventional band saw. The material tries to avoid the cutting tool. Make sure that the wedge angle is as small as possible and adjust the cutting speed if necessary. Milling Use commercially available milling cutters with a small number of teeth. Circumferential speed approx. 200400 m / min, clearance angle ∂ 10 °, clamping angle y 25 °. The use of a drilling emulsion is recommended for cooling and surface optimization. Rotate

Regrinding, repainting and remachining The flexible, but also durable, secutex – buffer pad provides reliable protection from expensive damage to your highvalue goods. Often the solution is paramount. Thanks to the integrated perforated plate, secutex – buffer pad can simply be bolted or welded. secutex is a highly wear resistant polyurethane, which was developed 30 years ago for lifting sharpedged components. In the years that followed, new solutions for materials protection and noise reduction were regularly constructed. Thus, today almostall bricks in Europe are moved using secutex protective coatings. secutex protection is almost the industry standard for the lifting and storage of sharpedged metal sheets. For us, health and safety at work is even more important than the prevention of damage to materials. Our expert advisers can present a number of innovative solutions to you whereby, using secutex – buffer pad, noise is prevented directly at source.

We produce basket filters and wire basket inserts of any kind according to customer specifications. Normally perforated plates with round or square perforation as well as wedge wire elements serve as base bodies. The filter baskets are lined inside or covered outside with plain or with pleated wire cloth, according to customer requirement.

Graf-Flex-SP2 seals The Graf-Flex-SP-2 seal is a pointed sheet seal produced by a special process. The design of the seal is based on empirical values. Numerous tests have been carried out to verify the adhesion between the pointed sheet and the graphite coating as well as the surface quality, and thus the adhesion between the coating and the flange surface.The first phase of these tests led to special perforation of the carrier plate in terms of the geometric shape of the hole and hole distribution. The second phase took account of the adhesion of the seal to the surface of the flange and defined the surface quality of the graphite material. The values found in this way were transferred to the mass production process using a special procedure. . This consisted of a specially produced perforated roller for penetrating the sheet together with a special surface roller. Finally, the graphite coating is applied to the defined surface in the calendering process.

Shape: perforated sheet material: EN AW-1050 (Al99,5), 3.0255 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020503 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1.5 Length (mm): 2,500 Width (mm): 1,250 Hole size (mm): 5 Pitch (hole center measured): 8

The Modellrange ECONOMIC is made of durable sheet steel. It comes with adjustable media consumption, a blast media collection bin and a sieve to separate blast media from contaminations. The cabinet has two lateral openings with sealing sliders for rod materials. A perforated metal plate with enforcements. The system has a sectional door that opens the complete workspace. The Cabinet comes with a door-safety switch, two large operation holes with multiple rubber Sealings. Monitoring window, sized 400x500 mm, with easy changeable glass/safety-glass panes, as well as 2 durable pneumatic springs. Energy Saving Lamp, attached from outside. Injector-type blast head, with air- and blast nozzle made of hardened steel. The system comes with all necessary compressed air and blast media hoses, oil-water separator, manometer, an electrical magnet valve and a foot switch. On/Off switch, dust filter system 0,55 kW, intermediate pressure turbine. Dust collection bag.