Overload protection - Import export

PROFI 6 TI Subsea JDN Subsea Hoists The ultimate tool for every professional diver PROFI subsea hoists are a versatile and indispensable tool for professional divers and are suitable for horizontal work as well as for oblique pulling. Advantages Air or hydraulic drive Infinitely variable speeds can be regulated sensitively With overload protection Very versatile, also suitable for horizontal and oblique pulling thanks to hook suspension

JDN Air Hoists PROFI 3 TI up to PROFI 100 TI also available as hydraulic hoists. PROFI 3 TI JDN Air Hoists PROFI Carrying capacities: 250 kg up to 100 t Air pressure: 4 bar or 6 bar Standard Features suitable for application in hazardous areas (Explosion protection) sensitive infinitely variable speed control for the precise positioning of loads easy operation suitable for lube-free operation frequent switching and extended duty cycles low maintenance low headroom, lightweight sound absorption insensitive to dust, humidity and temperatures ranging from -20°C up to +70°C from 1 t upwards with overload protection (EC-version) Technical Details fail-safe starting conditions, low maintenance vane motor chain sprocket in the mid section runs in dust proof maintenance free ball bearings planetary gear in long life grease lubrication, all teeth made of tempered or hardened high grade steel chain and hook of high quality tempered steels with a breaking strength of five times the...

At its eight outputs the µCAN.8.pwm-BOX provides pulse width modulated signals (PWM) within a range of 0% to 100% for controlling of actuators (valves etc.). The outlets are overload and short circuit protected. The µCAN.8.pwm-BOX is connected with the central control unit via CAN bus.

Compact single-stage gear with solid or hollow shaft combined with a 24V DC permanent magnet motor. Different shaft positions are possible. Stock motors have 28W or 54W output power and a speed of 3000 rpm. The SN15R / SN15HR comes as a 24V-BLDC with integrated operating and control electronics, overload protection and a 4-Q Pi Controller - 40W output power and a speed of 4000 rpm. Gearbox type: SN15 (solid-shaft) / SN15H (hollow-shaft) Motor type: 24V DC permanent magnet Mounting design: B3/B14 Transmission ratios: 3; 7; 10,5; 15; 21; 30; 40; 68 Protection class: IP40 (Other protection classes on request) Additional data: — Motor and gear in ball bearing — worms hardened and ground — Worm wheels from special bronze For further information see product detail page.

Mobile motorized traction sheve hoist for any lifting height, flexible and economic assembly and installation work. Simple operation for working safely at heights. Gsmartrac is a material rope traction hoist which drives a sheathed rope without rolling it up. This means any height can be reached. Electronic motor protection prevents overloaded lifting operations, giving your hoist long lasting service life with low wear. Please contact us for further information or technical details!

Product information "FOX6- XM-USB 2nd Gen" IEC 60601-1 approved, ≤ 10μA leakage current, Protection class 2xMOPP, DOE 2016 ready, IP42 approved exchangeable plug system as additional accessories, Double Safety: Housing snapped & welded.

Switchmode USB power supplies. Confirm to IEC 60950Additional information •Output voltage tolerance: +2% / -2% •DC output: USB socket Typ A •Current: 1000 mA •Family : FOX5 •Frequency: 50 / 60 Hz •Standard: IEC60950-1; IEC62368 •Humidity: 10% - 95% •Working temperature: 0°C - 40°C •Input tolerance: ±10% •Storage temperature : -40°C - 70°C •AC Input: EURO, US/JP •Input voltage: 100-240 V •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Output voltage: 5 V •Protection Class: II

Additional information•current 2: 5000 mA •Output voltage 2: 5 V •Means of Protection: Input Output 2xMOPP, Input - Ground 1xMOPP •Output voltage tolerance: +2% / -2% •Family : OF250 •AC Input: flat pin connector •Frequency: 50 / 60 Hz •Standard: IEC60601-1, EN61558 •Unit: OF •Humidity: 5% to 95% •Working temperature: 0°C - 60°C •Storage temperature : -40°C - 70°C •Input tolerance: +10% / -10% •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Input voltage: 100-240 V •Spec.0 cover sheet FW-Type: OF250-24 •DC output: flat pin connector •Current: 10500 mA •Protection Class: II •Output voltage: 24 V

Additional information•Output voltage: 24 V •Protection Class: I •Current: 18750 mA •Spec.0 cover sheet FW-Type: OF450-24 •Input voltage: 100-240 V •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Input tolerance: +10% / -10% •Storage temperature : -40°C - 70°C •Input current: 5500 mA •Working temperature: 0°C - 70°C •Humidity: 5% to 95% •Frequency: 50 / 60 Hz •AC Input: Screw Terminal •DC output: Screw Terminal •Family : OF450 •Output voltage tolerance: +2% / -2% •Means of Protection: Input Output 2xMOPP, Input - Ground 1xMOPP •Output voltage 2: 5 V •current 2: 100 mA •Standard: IEC60601-1, IEC62368-1

Product information "FOX18-XM" High efficiency: up to 86.9% Low no load power consumption 50ms(230V) •material: PC-ABS •Approbations: Europe, USA, Australia, Japan •Housing Flame Class: UL 94 V0 •IP Rotection rating: IP40 •Overload protection: JA •Short Ciruit protection: JA •Over Voltage Protection: JA

"LT UP" Characteristics LT UP: Current- and voltage regulation within one device, compact design, continuously short circuit proof, Overload protection, over temperature protection, No Load Protection, Powerfactor >0,5C, Lifetime: 60.000 at 35°C ambient temperature, DC-operation possible, without DIMMbox connection. •Output voltage tolerance: +2% / -2% •Frequency: 50 / 60 Hz •AC Input: connecting bracket 0,5...1,5 mm² •Humidity: 10%- 95% •Working temperature: -20°C - 45°C •Storage temperature: -40°C - 70°C •Standard 1: EN61347-2-13 •Standard: IEC61347-1 •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Unit: LED •DC output: connecting bracket 0,5...1,5 mm² •Input current: 150 / 200 mA •Input tolerance: ±10% •Input voltage: 220-240 V •IP rating: IP20 •Protection Class: II

Product information "FOX30-X" Features FOX30-X: Exceeds DOE 2016 requirements, high efficiency, minimum standby power dissipation ≤ 0.1 Watt, worldwide use due to exchangeable primary line, double security: snapped and welded. Additional information •color: black •Standard: IEC60950-1 •Input voltage: 100-240 V •Country version: FRIWO interchangeable mains plug system: see Primary Adapters •Protection Class: II •Input tolerance: ±10% •DC output: Universal output plug system •Storage temperature : -40°C - 70°C •Working temperature: 0°C - 45°C •Humidity: 10% bis 95% •AC Input: FRIWO interchangeable mains plug system: see Primary Adapters •Frequency: 50 / 60 •Output voltage tolerance: ± 5% •Gehäuse / Housing: FOX30 •Input current: 600-300 mA •leakage current: ≤10 µA •Overload protection: Yes •Over Voltage Protection: Yes •Short Ciruit protection: Yes •Operating Altitude: 2.000 •EMV/ EMC: EN55022, EMV55024 V •Dimension: 90x55x34

Overload Release Clutches are designed to provide accurate overload protection and automatically reset after the overload is cleared.

Mechanical clutch used for most start and stop applications that require positive engagement and disengagement while providing overload protection. Simplified no-linkage design offers full control over clutch engagement.

Automate your feed axes using the SeGMo positioning system from Lenord+Bauer! A simple integration into your plant control system enables you to boost system efficiency in format changes and save time and money. The SeGMo drives are complete mechatronic systems with a batteryless multiturn absolute rotary encoder, gear and motor as well as integrated power and control electronics. • Positioning drive for installation situations with little space • Monitoring of important system parameters ensures reliable operation (overload protection) • Ready for use immediately after power on due to absolute multiturn position detection • Maintenancefree due to sealedforlife lubrication • Optionally with cULus component recognition

Technical data In general The actuator is especially suitable for the operation of ball valves and butterfly valves with 90°-rotation angle. A waterresistant body with overload protection and a heating device against condensation water. Materials Carbon Steel, Aluminium Alloy, Bronze Body polyester coated Installation Vertical as the picture shows. All other installations only after request. Ambient temperature -20°C … +70°C Mounting pad DIN-ISO 5211 Standard voltages 24V DC (only up to NA028) 230V AC, 400V 3AC others on request Protection IP 67 ATEX-Protective class (Option) II 2G EEx d IIB T4 Cable entry 2 x M20x1,5 Protection devices 2 (OPEN/CLOSE) torque switches, Motor thermostat End stops 2 limit switches. Operating angle 90° ±5° Heater 20W Duty cycle 25 … 50% Standard equipment 2 additional limit switches, optical position indicator, manual override. Option Please refer to the data sheet The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

Technical data In general The actuator is especially suitable for the operation of ball valves and butterfly valves with 90°-rotation angle. A waterresistant body with overload protection and a heating device against condensation water. Material Carbon Steel, Aluminium Alloy, Bronze Body polyester coated Installation Vertical as the picture shows. All other installations only after request. Ambient temperature -20°C … +70°C Mounting pad DIN-ISO 5211 Standard voltages 24V DC/AC, 230V AC others on request Protection IP 67 ATEX-Protective class (Option) II 2G EEx d IIB T4 Cable entry 2 x M20x1,5 Protection devices Motor thermostat End stops 2 limit switches. Operating angle 90° ±5° Heater 5W Duty cycle 75% Standard equipment 2 additional limit switches, optical position indicator with add. LED, manual override. Option Please refer to the data sheet The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!