Mark and - Import export

Self-adhesive floor-marking window for A5 paper inserts. Removable. • Floor marking windows for labelling with paper inserts • Self-adhesive strips stick the window to the ground • Easy mounting: Paper in A5 format is inserted under the clear labelling pocket, while the surrounding adhesive protects it • For portrait and landscape formats • Slip resistance (R Group) R9 in accordance with German workplace ordinance ASR A1.5/1,2 ‘Floors’ per DIN 51130 • Frame colour signal yellow, similar to RAL 1003 • Window dimensions: 210 x 148 mm (W x H)

Self-adhesive floor-marking tape for indicating walkways and driving routes in warehouses and factories. • Self-adhesive, extra-strong marking tape for indoor use • Abrasion resistant and hard-wearing due to extruded material with a thickness of 1.2 mm • Strong adhesion due to chamfered edges • Slip resistance (R Group) R10 in accordance with German workplace ordinance ASR A1.5/1,2 ‘Floors’ per DIN 51130

Self-adhesive marking tape for temporary identification of objects and surfaces. • Self-adhesive marking tape for indoor use. • Suitable for temporary identification and marking of stationary or mobile objects and surfaces. • The use of rubber adhesive makes the soft PVC tape very conformable. • Easy to apply and remove. • The surface for adhesion must be smooth, solid, clean and free of grease and dust • Tape thickness: 0.16 mm • Width: 50 mm

Self-adhesive floor-marking tape for indicating walkways and driving routes in warehouses and factories. • Self-adhesive floor-marking tape for indoor use • Slip resistance (R Group) R9 in accordance with German workplace ordinance ASR A1.5/1,2 ‘Floors’ per DIN 51130 • For the robust and long-term marking of walkways and driveways in warehouses and factories • Suitable for forklifts, with the exception of steering, braking and turning movements • Thickness: 0.5 mm • Width: 50 mm • Colours similar to RAL 9003 signal white, 3001 signal red, 1003 signal yellow, 6032 signal green, 5005 signal blue

Self-adhesive floor-marking shape “T” for indicating danger zones, storage spaces, walkways etc. • Floor marking shape: "T" • Floor-marking shape for indicating dangerous areas, storage spaces, walkways, etc. • Self-adhesive symbol for application on floors in interior areas • Abrasion resistant and hard-wearing • Colour code: RAL 1003 signal yellow

Manual marking dies in engraved design for marking various materials in mirror writing. After hammering into the materials to be marked, texts are legible accordingly. We produce the manual marking dies in many sizes as well as in dotted low-stress design. Individual logos or symbols as well as multi-digit texts are produced to your data.

Manual marking die sets in engraved design for figures from 0 to 9 or letter sets from A to Z in various fonts according to DIN 1451 – in narrow font, narrow-medium font or broad font, alternatively also individually in Arial, Eurobold, etc. The dies can also be made in dotted low-stress design.

Laser inscription offers a wide spectrum of options for designing advertising gifts of your company with individual texts, names or logos. Your inscription wishes are implemented exactly in accordance with your requirements. Contact-free laser inscription has the benefit that the parts to be inscribed do not need to be tensioned and even areas that are difficult to access can thereby be processed.

Manual marking type holders with hardened type surface, replaceable striking cap, pint stop and clamp screw. This manual marking type holder allows individual labelling, also with company logos. The font size can be designed variably. No fixed norm exists. We make your type holders according to your data.

55% polyacrylic, 25% wool, 12% polyamide, 2% elastane Stylish functional stockings for ski and snowboard. With special reinforcement and functional paddings to avoid pressure points. Super soft flat seam protects the sensitive toe area. Ergonomic knitting type with stretch ribs in the middle of the foot and on the shaft guarantees an optimal fit without slipping in the shoe. The innovation: functional anti-blister padding made of innovative nano yarn reduces friction and thus relieves particularly stressed areas. Pressure points or blisters can thus be prevented or existing complaints alleviated. For absolute performance!

Removable floor marking for interior spaces. • Self-adhesive floor marking with symbol “Wear a face shield”, M013 to ISO 7010 • Removable self-adhesive warning signs for application on interior floors, e.g. in supermarkets, gyms, hotels, restaurants, filling stations. • The surface for adhesion must be smooth, solid, clean and free of grease and dust • Compliant with ASR A1.3 and DIN EN ISO 7010 • Slip resistance (R Group) R9 in accordance with German workplace ordinance ASR A1.5/1,2 ‘Floors’ per DIN 51130 • Dimension: Ø 430 mm. Thickness: 0,2 mm

Self-adhesive labels for marking shelves, cupboards, containers, etc. • Self-adhesive LABELFIX® labelling windows • Self-adhesive windows for labelling filing trays, shelves, drawers, cabinets and technical appliances • Open on both sides, can be cut to size • Shelf windows with PC-printable blank insert sheets. • Dimensions: 200 x 10 mm (W x H)

This brightly-coloured barrier chain (black/yellow) serves to mark the edge of a fall danger zone. The chain (8 mm) is made of weather-resistant synthetic material. The stainless steel posts are weighed down using special UV-resistant plastic weights. Stainless steel posts with specially-designed UV-resistant plastic weights Weather-resistant synthetic barrier chain Gate post equipped with a carabiner for opening and closing the system Warning plate (224 x 124 mm) Minimum distance to the edge: 2 m Posts can be placed up to 5 m apart

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

Tool for marking of inseration depth for NiroSan® / NiroTherm®, with pen holder and magnet, 15 - 108 mm

Handjet EBS-260 stands for unrestricted mobility, easy handling and operational capability even under rough operating conditions. The coder has many useful functions for everyday operation that make your life easier. High efficiency through low ink consumption and long battery life help you to reduce your operating costs significantly. No more wasting time transporting your products to the printer. Bring the printer to the product! The Handjet EBS-260 is easy to transport and does not require much preparation. The coder weighs only about eight apples. Tired arms are a thing of the past. You can easily work for hours and don't even feel the weight. Objects that are difficult to access, such as ventilation pipes, are often only accessible overhead. Thanks valve technology, the handjet prints in any position. Learn more on our homepage and convince yourself!

The Handjet EBS-250 makes its mark. Firstly, because the inkjet printer is a hand-held marking device for mobile use and secondly, because its technical innovations, application possibilities and particularly clear print image are trend-setting. With the Handjet reliable marking can be made on practically any surface, whether metal, fabric, ceramic, plastic or wood. It is also extremely easy to use: the codes are digitally read into the device and printed out at the touch of a button. Don't waste time to transport your products to the printer. Bring the printer to the product! Handjet EBS-250 is easily transportable and doesn't need big preparation. It only weighs as little as five apples. Tired arms are things from the past. You can easily work for hours and you don't even feel the weight. Hard-to-reach objects such as ventilation pipes are often accessible only overhead. The handjet prints in any position, thanks to valve technology.

In the ink jet segment the EBS 1500 is known for it's simple but efficient handling. The printer can get equipped with a bunch of different printheads, optional from 16 nozzles up to 128 nozzles. Expressed in font height this means from 6 mm up to 230 mm. With our EBS-1500 you can operate up to 6 printheads with one controller. This is a big advantage for companies with several parallel production lines. It is possible to print a different project with each head. It's even able to work with pigmented inks. This brings you the maximum contrast for difficult materials. The EBS 1500 combines word processing with graphics, barcodes and data matrix codes in an easy-to-use graphical user interface. With features such as IP54 protection and the ability to connect up to 6 print heads to one controller, this coder is the right tool for large production lines and harsh conditions.

The new generation of BOLTMARK ® II printers has increased in terms of performance, functionality and reliability. Our engineers have created a product that will not let you down, even under the toughest conditions, and will also work highly efficiently. ACPS - Anti Clogging Power Supply: Worldwide innovation: for the first time in a Continuous Ink Jet Printer, a built-in automatic and intelligent system provides reliable printer operation in case of power failure. Should the power be interrupted for less than 30 seconds, the printer continues operating. If the supply is cut off for more than 30 seconds, the printer starts the automatic shutdown procedure including rinsing, to protect the tubes from dried ink deposits. As soon as the power is restored the printer is quickly operational again. The ACPS contains very long-lasting Super Charger Capacitors, not conventional accumulators. Charging lasts only around 2 minutes. The ACPS is available optionally only for EBS-6600 and EBS-6900.

The ink-jet printer EBS-230 of the "PicAS"-series sets new standards in regard to configuration and cost-effectiveness of basic DOD (Drop on Demand) systems, which remain relevant to newest DOD systems. With a print height of 6mm up to 27mm (depends on selected version) and a print speed up to 60m/min the EBS-230 is the perfect marking system for small to medium production volumes. The ability to use fast-drying inks on Ethanol-, Acetone- or MEK base provides a universal solution for various marking applications. No matter if the surface is made of cardboard, plastics, metal, glass or ceramics. Trough a process of consistent development of the established line coder "PicAS" EBS-200 we created a totally splash water protected system which is also independent from external compressed air.

EBS-7200 is a fast, single-head industrial printer of the type "INK-JET" (ink drop ejection) which can be used for non-contact marking of objects that move for example on a belt conveyor. The marking speed of this printer is exceptional. It is 46% faster than the 6500 and 6800 and is therefore designed for marking tasks that require an exceptionally high marking speed. The device is designed for printing with different coloured dye inks (i.e. homogeneous, pigment-free inks). The commercial versions of the printers differ in the maximum height of the printed image (MVP - maximum height of the vertical row of dots), which can be 16 (25 or 32 as an option) dots.

Our EBS-6600 is the first model from the brand new Boltmark II-series. It's an industrial single-head Ink-Jet printer designed for coding moving objects on a factory conveyor without requiring direct contact. It's able to code from 1.2mm up to a maximum of 14mm height with a max. amount of up to 25 dots [depending on text profile].

EBS-6800P is an industrial one head INK-JET printed engineered for tagging pieces that move on a factory conveyor with no direct communication. System for tagging immobile pieces can also be accessed which are based on mobile print-head technique wherein the print heads can be regulated mechanically or physically. The pigment inks used in our printers allow print on a variety of dark substrates. Other inks allow high contrast and good coverage prints of any surfaces, also work well on multi-colored substrates. With our know-how you will find the right Ink for every application. The EBS BOLTMARK II series is fitted with an integrated ink system, which can be changed in 3 simple steps in less than a minute. No technician and no tools needed. Equally, the quick change of ink and solvent bottles works in the same way. Protection class IP44 and IP54: Protection of the housing against intrusion of water and coarse dust guarantees high reliability of the printer over a long period.

Traceability codes like RFID or data matrix have established themselves in the area of product traceability. Yet they are not per se counterfeit-proof. SECUDATA® therefore combines the logistic advantages of the different traceability codes with the counterfeit protection of our micro colour-codes. Both codes are conjointly applicable onto the product, its primary or secondary packaging, labels or closure seals. The traceability system as well as the product can thus be identified as originals. Merchandise management data can be checked in databases worldwide. In a first step, the traceability code is verified. But only the verification of the colour-code unambiguously identifies the authenticity of the traceability code and the product. Additionally, counterfeit-proof delivery and freight documents as well as other accompanying documents can be issued. Customised seals and hologram labels, control seals and closures are also manufactured and protected against counterfeiting.

With SECUDOC® counterfeit-proof certificates, reports, security papers, contracts and plans are issued. Signatures, business letters, credit cards and ID cards can also be protected against forgery. The colour-code is admixed to the transfer medium clear lacquer and can be easily printed or applied manually to the surface of the documents. SECUDOC® contributes its share to the prevention of document forgery and abuse. SECUDOC® enables forgery-proof documentation of entire distribution channels: transport documents like delivery notes and freight documents as well as papers for customs and other authorities are unambiguously identifiable as originals and can be attributed to a distinct delivery through the use of SECUDOC®.

With SECUART we have developed a solution for the fine arts market that protects all kind of artwork and antiques as well as expertise against forgery. Like a genetic fingerprint, SECUART® secures artists' work during the creative process. Museums and galleries can also mark their collections themselves or have them subsequently secured with SECUART by a qualified service team. Each artist receives his individual micro colour-code. The technology does not leave any aesthetic marks on the artwork. The code is applied with the transfer medium clear lacquer and is identifiable with a simple microscope. For archivists, experts and collectors, the unambiguous attribution of an expertise to a certain artwork is possible. Other official documents can also be identified and associated with a work of art. Artists and owners are equally protected against counterfeits.

Low quality and dangerous chemical substances in brand clothing imply loss of image and financial disadvantages for the original manufacturer. For the consumer these textiles can become an annoyance or even a health hazard. To prevent these risks we have developed an industry solution for the protection of fashion and textiles: SECUFASHION® identifies sports and lifestyle clothing, accessories and sports shoes as originals. SECUFASHION® can be applied in all clothing items and on nearly all materials, for example synthetic shoe soles and heat transfer beachwear. All kinds of labelling materials are also secured with the industry solution. This includes all textile and sew-in labels as well as hangtags, leather tags, care labels and other textile fabrics. SECUFASHION® is suited for application in all textile areas and is easily integrated into existing production processes.

Protection of primary and secondary packaging. Counterfeit-proof labelling is especially important in the pharmaceutical industry. Not only lifestyle medicines and cosmetic products are targeted, life-saving pharmaceuticals are also counterfeited. This development can also be observed in the market for spare parts. This is why we have developed SECUPACK®. Primary and secondary packaging from all industries are labelled as originals, for example folded boxes, tubes, cans, phials, blisters and closures made of different materials. With SECUPACK® a product's distribution channel can be uninterruptedly retraced from the manufacturer to the wholesaler and the retailer. Counterfeits are quickly withdrawn from circulation and do not make their way into the trade circuit. Especially with pharmaceuticals, it is crucial that primary packaging contains the correct medicine and is unambiguously identifiable as original.

With SECUPRODUCT® we have developed a cross-industry solution for the direct marking of products. The micro colour-codes SECUTAG® form the basis of this solution. Spare parts in the mechanical engineering industry, in the automotive and aircraft industry can be secured against counterfeiting. From amplifiers to zips, SECUPRODUCT® enables the direct and legally binding labelling of originals. For an adequate product protection, the perfect adhesion to the product is decisive: SECUPRODUCT® is meticulously and precisely applied onto nearly all solid matters, among which metals, synthetics, paper products, glass, alloys and textile fabrics. For smaller productions and single pieces, the application can occur manually; for large serial productions, the colour-codes are integrated fully automatically into the existing manufacturing process.