Threading - Import export

drylin® SHT-12 linear module, drylin® R hard-anodised aluminium shafts, Trapezoidal lead screw TR10x2 made of stainless steel with ball bearings, machined lead screw ends 6h9x17mm, quad blocks, aluminium shaft end support, stroke lengths in 250mm or 500mm. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

Straight from our warehouse Approx. We always have 150 different versions of threaded outlets (ANSI B 16.11 / MSS SP 97) available in our extensive warehouse in Kamen. In our warehouse we have threaded outlets with NPT threads according to ASME B1.20.1 in stock. Threaded outlets with BSP / T threads according to ISO 7-1 and with BSP / P according to DIN ISO 228 are available with short delivery times. We only deliver goods of European origin. Standards and special requests Threaded outlets are available in two pressure levels (3,000 lbs and 6,000 lbs) and in all common materials. If required, we can also supply special materials. In the case of threaded outlets, a distinction is also made between reduced and full branches. Express service We can deliver threaded outlets in stock within Germany the next day to the customer if the order is received by 11.00 a.m. Simply specify when ordering if you would like to use this express service.

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates d1 [mm]: Drylin® - Product overview DryLin® - System selection & Lifetime calculation Anti-backlash lead screw nut assembly d1 [mm]: Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates

Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates Leadscrewsstorage Anodized aluminum bearing blocks of iglidur® L250. Design your own linear table. Leadscrewsstorage Single start trapezoidal lead screw Two start trapezoidal lead screw L = Length TR = thread outer diameter m = pitch Leadscrewsstorage Anodized aluminum bearing blocks of iglidur® L250. Design your own linear table. Leadscrewsstorage Single start trapezoidal lead screw Two start trapezoidal lead screw Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates

Most simple threading Short setup as roller adjustment can be maintained with coilchanges Most comfortable maintenance and cleaning Synchronized drive of all bottom work rollers and both pinch rollers Rollers are kept perfectly parallel with adjustments shown on scales or dial gauges Hardened 63 rockwell rollers with finepolished surface guarantee longevity Warpresistant body in modular design to allow extension with catenary rollers, threading system or loop bridge, etc. Hard chromed rollers Polyurethane coated rollers Hydraulic head opening Hydraulic threading systems in different grades Dial gauges for roller adjustment display Motorized adjustment of straightening rolls Jobmemory for mot. straightening roller adjustment Central edge guide adjustment via handwheel All roll drive Movable base Manual or hydraulic loop bridge... etc.

Both straightening and (servo) feeding performed in one operation Saves floor space as 2nd loop between standalone straightener and servo feed is eliminated Great feeding accuracy of +/ 0,1 mm Operator interface provides simple insertion or recall of feeding paramenters or memorized programs Synchronized drive of all bottom work rollers and both feed rollers Rollers are kept perfectly parallel with adjustments shown on scales or dial gauges Hardened 63 rockwell rollers with finepolished surface guarantee longevity Warpresistant body in modular design to allow extension with catenary rollers, threading system or loop bridge, etc. Hard chromed rollers Polyurethane coated rollers Hydraulic head opening Hydraulic full piloting Hydraulic threading systems in different grades Dial gauges for roller adjustment display Motorized adjustment of straightening rolls Motorized central height adjustment Central edge guide adjustment via handwheel All roll drive

stainless steel*ground surface*Ø 12 mm

Wide range of products available at short notice Our delivery program in the product group flanges (ANSI B 16.5) includes the following types: Welding Neck Flanges. Slip-on flanges Loose Flanges (Lap Joint Flanges) Blind Flanges and Socked Welding Flanges Threaded Flanges Special / drawing parts. Special competence for special materials We supply flanges in the dimensions ½ "to 24" in the pressure levels 150/300/600/900/1500/2500 lbs. Our special competence lies in the delivery of special materials. The following special materials are available: Carbon Steel A 350 LF2 Chrome-Moly Alloy A 182 F Chrome-Moly Alloy A 182 F11 Chrome-Moly Alloy A 182 F 22

Nipples available in numerous variants and lengths 3 types of nipples The nipple product group is divided into three different types: Standard pipe nipple concentric pipe nipple eccentric pipe nipple Different endings Nipples are available with a thread or without a thread on one / both sides. The variant without thread can be delivered with beveld or plan end. Nipples can be supplied with the following threads: NPT thread according to ANSI B 16.11 BSP thread according to ANSI B 16.11 G thread according to DIN ISO 228 R thread according to DIN 2999 like BEP.

Unions in numerous variants Numerous special designs Due to our excellent national and international supplier relationships, we are able to deliver standard fittings as well as numerous special designs. It is possible, for example, to deliver A 105 screw connections with a bronze-steel seat. Different thread types Screw connections can be supplied with the following threads: NPT thread according to ANSI B 16.11 BSP thread according to ANSI B 16.11 G thread according to DIN ISO 228 R thread according to DIN 2999 like BSP. Internal / external thread and SW ends All threads are available as internal / external threads (male / female). Furthermore, the screw connections can also be supplied with SW ends (socked weld). The combination of the different ends is also possible. Screw connections according to ANSI B 16.11 are always 3-part and have a metallic-conical seal.

Thread fittings according to ANSI B 16.11 Straight from our warehouse We always have numerous versions of threaded fittings (ANSI B 16.11) available in our extensive warehouse in Kamen. We can also supply you at short notice. We only deliver goods of European origin. Different thread types Screw connections can be supplied with the following threads: NPT thread according to ANSI 1.20.1 BSP thread according to EN 10226 G thread according to DIN ISO 228 such as BSP / P R thread according to DIN 2999 like BSP / T. Standards and special requests We supply threaded fittings as standard in two pressure levels (3000 lbs and 6000 lbs) and in all common materials. We can also supply 9000 lbs and special materials if required.

Threaded bolts DIN 976-1, type A M3 to M6 x 96 mm Double threaded bolts wth a rolled-on unilateral or bilateral thread M2.6 to M10 mm Length of up to 1.000 mm Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

stainless steel*ground surface*threaded M 10*Ø 12 mm

No coil expansion needed Selfcentering of coils through continuously adjustable coil side guides Machine body in rigid steelplate design Cradle rollers of hardened steel, driven synchronously Clockspring guard Hydraulic threading system with prebending roller and peeler wedge Hydraulic hold down arm (optional w powered endwheel) Motorized coil guides Ultrasonic loop control Cradle rollers with separate threephase motor

Funnels for pipes and bright steel In the production of pipes and bright steel socalled funnels are used for threading in the production plants. In most cases funnels made of polyamide are used, but due to the material hardness and the sharpedged pipe ends wear out very quickly. It depends on the material sphere As an alternative, secutex offers polyurethane funnels for this purpose. In contrast to polyamide, these are softer from the material and therefore also more wearresistant than sharpedged pipe ends. This means longer service life for the customer as well as better surface protection for very sensitive materials. For every size secutex funnels can be produced in the required dimensions according to customer drawings.

1 internal /*1 external thread M 10*Ø 12 mm*size of jaw 10 mm

safety pilot, thermocouple, G 1/4 screwed left-hand, air regulation, needle valve, pilot flame, DIN 30665

Design and construction This Schulz ball caster / ball transfer unit consists of a casing with threaded pin, a top cover and a bearing cap as solid turned parts, a bearing ball and several support balls. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5.

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Large Quantities: produced as cold formed parts (so-called multi-station presses), which require high output volumes in order to achieve a reasonable price parts Small Quantities: Produced as turned parts - the economic adjustment to small batch sizes Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction.

M 10 nut*for use in:*Retort Stand Bases*Labjacks

M 10 nut*for use in:*Retort Stand Bases*Labjacks

Design and construction This Schulz ball caster / ball transfer unit consists of three stamped parts, the casing, bearing shell, threaded pin, a bearing ball and several support balls. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5.

Design and construction This Schulz ball caster consists of a casing with threaded pin and a top cover as solid turned parts, a bearing ball and several support balls. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5.

SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

Sensor with extension tube for screw-in The OPTITEMP TRA/TCA-S12 is a temperature assembly for screw-in. It is predominantly used in the lower temperature range (up to +150°C / +302°F). When it features a neck tube, spatially separating the process connection from the  connection head, the connection head cannot heat up as much. This is particularly important when there is a temperature transmitter in the connection head. Form acc. DIN 43772: Form 2G Design: DIN-style, welded, multipart thermowells Process connection: threads: G 1/2, G 3/4, G 1, 1/2" NPT and 3/4" NPT Neck tube connection: with fixed neck tube Tip design: straight tip Diameter: Ø 9, 10, 11 and 12 mm