Temperature control - Import export

Temperature controllers and temperature sensors from Klöpper Therm are used in all electric heating systems in which the temperatures of the heated areas must be reliably measured and controlled with precision.

CSN® space heaters are robust heaters for industrial environments and can be used even in harsh environments. Depending on customer’s requirements, the heaters can be manufactured with different surfaces (painted steel, galvanized/painted steel, stainless steel) and equipped with temperature controllers, temperature limiters and protective grids.factory floors crane cabs work containers workshops storage rooms Instantaneous heating on construction sites garages garden houses fire brigade equipment houses

Whenever the process requires high temperatures and the advantages of water as heat carrier (best heat conductivity properties, inexpensive, low viscosity) are to be used, this construction series is the best solution. Absolute reliability, high regulating accuracy, easy operation and a favorable price /performance ratio: apart from the versatile performance features a modern temperature controller has to fulfill, these are the key criteria for the temperature controllers teco wh/whx. As one-circuit and multi-circuit units, our modular temperature controllers in the teco whx series cover a wide performance spectrum. Heating capacities of 12 to 600 kW, max. possible cooling capacities up to 1460 kW* and pump flow rates of max. 200 m3/h are impressive basic data of these technically sophisticated temperature controllers for operation with compressed water up to 220 °C.

HIGH PERFORMANCE TEMPERATURE CONTROL DEVICE WITH HIGH COOLING CAPACITY, HIGH FLOW RATE AND REDUCED ENERGY CONSUMPTION. Due to the design, dimensioning and selection of the used components, enersave temperature control systems are the most efficient systems on the market with the highest flow rates at operating point. In the selection series we used the most frequently selected equipment features and heating performance of the proven premium series advanced. The protemp selection temperature control unit is particularly suitable for the supply of multi-circuit water distributors and is designed for the display of up to 6 external proflow temperature control channels.

The patented gwk solution includes cold water temperature controllers that can be operated without glycol in the temperature range between 0 °C and 25 °C. The user can select between two models that are differing in cooling capacity and flow rate. A precise microprocessor control with simultaneous indication of nominal and actual value, the simple one-touch operation, optional interfaces at the front panel and external sensor connection, splash-water proofed electrics and the cabling with CEE-socket ready for connection make the unit ready for immediate use. Leak stop operation, mould draining, acoustic alarm, automatic filling and top up, additional manual filling possibility for conditioned water, strainer in the cooling water connection and parts out of corrosion resistant materials that are in contact with the medium are part of the comprehensive standard equipment.

The higher process temperatures, the higher the technical requirements for the temperature machine. Decades of experience in construction of temperature machines for heat carrier oil applications up to 400°C makes us the preferred partner of many customers for applications of this kind, particularly in the area of pressing and extrusion. Dimensioning of our teco tt/th series up to 400°C is based on DIN 4754. Design and technical configuration of all temperature controllers are based on the requirements of this norm. Exact film temperature calculation ensures, in combination with flow monitoring, efficient and at the same time reliable operation in all operating conditions. A lockable filter in the circulating medium return line is a standard installation; another installed feature is an expansion vessel with a cold oil container for reliable prevention of damage by oxidation due to oxygen accumulation in the heat carrier.

HIGH PERFORMANCE TEMPERATURE CONTROL DEVICE WITH HIGH COOLING CAPACITY, HIGH FLOW RATE AND REDUCED ENERGY CONSUMTION. Due to the design, dimensioning and selection of the used components, enersave temperature control systems are the most efficient systems on the market with the highest flow rates at operating point. By using an optional frequency inverter, the already high basic effi ciency can be more optimized and the pump characteristic curve can be optimally adapted to the respective operating conditions. PROTEMP SERIES 1-4 ADVANCED Water temperature control unit up to 95°C -140 °C Cooling capacity: 105 - 717 kW Heating capacity 9 - 50 kW Digitization concept „protemp connect 4.0“ Dual frequency version (50/ 60 Hz), motor IE3 class Energy consumption display Pump speed control OPC UA interface

Absolute reliability, high regulating accuracy, easy operation and a favorable price/performance ratio: apart from the versatile performance features a modern temperature controller has to fulfill, these are the key criteria in the teco wi temperature controller series teco wi. As one-circuit and multi-circuit units, our modular temperature controllers in the teco wi series cover a wide performance spectrum. Heating capacities of 12 to 1000 kW, max. possible cooling capacities up to 3460 kW* and pump flow rates of max. 300 m3/h are impressive basic data for these technically sophisticated temperature controllers for operation with compressed water up to 150°C. This series is mainly used for roller temperature control (foils, paper, rubber etc.).

The teco cs series was improved by installation of a user-friendly touch screen with new, integrated functions. All standard units are equipped with an energy efficient constant heating control. Depending on the product version a flow rate measurement and control, whose actual value is indicated simultaneously with the actual and nominal values on the colour screen, is installed as standard or is optionally available. Temperature profiles are graphically indicated after selection of the corresponding menu function. On the start page useful functions like limit value monitoring, leak stop operation etc. can be selected. The proven teco cs series was improved by installation of a user-friendly touch screen with new, integrated functions. The 95°C series was extended by three versions with higher capacities. The models are designed for larger consumers; they have heating capacities from 18 to 36 kW, cooling capacities from 50 to 120 kW and pump flow rates from 110 to 170 l/min.

The use of direct cooling is always an advantage when a high cooling capacity is requires and the temperature differences between cooling water and circulating water are low. Here cooling water is directly and without temperature loss supplied to the circulation circuit. Absolute reliability, high regulating accuracy, easy operation and a favorable price/performance ratio: apart from the versatile performance features a modern temperature machine has to fulfill, these are the key criteria in the temperature controller wd series.

Temperature controllers of the teco series cd are designed for the operation with water and direct cooling up to 95 °C or 120 °C. The temperature of the process water is controlled automatically. A temperature sensor, installed inside the unit, measures available actual temperature. The microprocessor control with membrane keyboard or touchscreen operation compares measured value and preselect set value and controls heating or cooling. A trouble free operation is guaranteed by a complete safety system.

HIGH PERFORMANCE TEMPERATURE CONTROL DEVICE WITH HIGH COOLING CAPACITY, HIGH FLOW RATE AND REDUCED ENERGY CONSUMPTION. Due to the design, dimensioning and selection of the used components, enersave temperature control systems are the most efficient systems on the market with the highest flow rates at operating point. In the selection series we used the most frequently selected equipment features and heating performance of the proven premium series advanced. The protemp selection temperature control unit is particularly suitable for the supply of multi-circuit water distributors and is designed for the display of up to 6 external proflow temperature control channels.

Dynamic mould temperature control is a temperature control method that allows temperature variations within the cycle and is also known as “variotherm temperature control”. While this method has been known for almost forty years, it has only undergone a dynamic development in the last few years. This is due to the increasingly exacting quality requirements of consumers (e.g. prevention of visible joint-lines, gloss variations and other surface defects) and the use of plastic materials in new applications. When a temperature control system is selected it is important to mind that it matches exactly with the application and that the economic benefit justifies the technical efforts as well as the energy consumption.

Brand-new perspectives and possibilities are offered by the dynamic temperature control with CO2. This new and environmentfriendly procedure really provides a solution for heating and cooling of complex and thinwalled moulded parts. By using gaseous media for heating and cooling processes, soiled cooling channels are now a thing of the past. Basically it is true that gaseous media have the disadvantage to be bad heat carriers. This applies at least to air that is only used for cooling processes under special circumstances. But in contrast, if the opportunities of CO2 are exhausted properly, it offers an interesting alternative to conventional water temperature control.

The integrat 80 is used for the modular temperature control with water up to 140°C in the basic version with up to six temperature control circuits to be operated completely independently of each other. The basic version can be expanded with extension columns and up to 24 temperature control modules. As an option, the temperature control circuits can be extended with the 4-way distributor vtc with flow and temperature measurement. Thus, a maximum of 96 temperature control circuits can be monitored with the vtc 4-way distribution system. In conjunction with the standard heating control system used as standard, a homogeneous temperature profile on the mould cavity surface is achieved in an extremely energy-efficient manner, as well as with constant cooling by using a motor valve. As an option, the pumps can also be operated with frequency control unit. This improves the procedural results and contributes to energy savings.

Inventory management for airline caterers Lödige has developed a compact storage, transportation and control system for airport kitchens where space is at premium. The Lödige SPACE TOWER improves catering logistics and reduces space requirements by using encased centralised storage with integrated vertical transport. It combines storage and transport functions in an ambient or temperature controlled environment and plays a central role in the flow and tracking of goods and trolleys. Increased transparency and process excellence are the result. Benefits Increases available floor space by up to 80% Centralises storage enabling connectivity across production levels Removes the need for interfloor goods hoists Creates a controlled, secure, hygienic environment Saves energy by reducing the temperature controlled space

Branding irons for hot stamping in wood, leather, rubber or synthetics for inclusion in an electric branding iron device. The iron can be supplied with a controller for stepless temperature control. This ensures a temperature-precise control of the heat development created. Overheating is thereby avoided and the labelling obtains an attractive design.

Temperature control of liquids Tube coil heat exchangers (so-called tube cooling coil heat exchangers) are generally used to control the temperature of liquids. This system can also be used to heat or cool liquids in a controlled manner. Due to their special shape, pipe coil heat exchangers are sometimes also called hairpin heat exchangers. Inexpensive applications The simple and solid structure enables it to be used in cost-effective applications. Coiled tube evaporator systems are ideally suited for brine and glycol applications. Classic variant Coiled tube evaporator systems are a classic and proven variant in the field of heat exchanger systems. Coiled tube heat exchangers are often used in ice storage systems or in the production of cold water units. In ice storage systems, coils can be used to achieve an even build-up of ice around the coils.

We develop and manufacture electric heating components for air conditioners in train systems and shipbuilding as well as preheaters and braking resistors for the drive technology. In the field of separator technology, we manufacture heating elements for the temperature control of different liquids. In all areas we apply the highest standards of high voltage and insulation resistance.

The latest version of heating controller UNIPLEX made by Klöpper Therm again satisfies with development competence and future oriented technology in one device. Especially designed for the control and monitoring of electric heating systems, it combines several functional elements in one device. Temperature controller, safety temperature limiter and current regulator are arranged in a space saving way on a 19” plug in board in European standard size.

ELECTRIC HEATER FAN TDS 120The thermal power plant among the TDS electric heater fans With a hefty 30 kW of heating power the TDS 120 is the undisputed No. 1 among the popular TDS electric heater fans from Trotec and offers you convenient spare capacity for the permanent heating of larger rooms or for temperature control in large-volume building sections. Owing to the integrated thermostat control, the generated warm air current can be infinitely adjusted to the desired temperature and regulated in line with demand via a two-stage power control for space-filling temperature control. And since our distinctive logo has been printed on the outside, we have also incorporated distinct extras inside, which make all the difference to conventional standard electric heater fans.

TDS 50 Electric Fan Heater The TDS 50 electric heater provides a heating performance between 4.5 kW and 9 kW in 3 stages (stage 1 only fan). Furthermore the TDS 50 has an integrated thermostat for continously adjusting the desired temperature. In comparison to direct fired gas or oil heaters, the electric fan heaters of the TDS series dont consume oxygen or produce combustion gases. Because of that this devices can be used everywhere, in particular for temperature control of unheated interiors. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 50 is suitable for uses in enclosed rooms Wall and ceiling bracket available - mounting is available as an accessory

MULTI-ZONE TEMPERATURE CONTROL- AND MONITORING SYSTEM WITH NON-CONTACT FLOW MEASUREMENT. Due to the design, dimensioning and selection of the used components, enersave temperature control systems are the most efficient systems on the market with the highest flow rates at operating point. By using the frequency inverter, the already high basic efficiency is optimized and the pump characteristic curve will be optimally adapted to the respective operating conditions. The flow measurement of the individual temperature zones is carried out using noncontact measurement technology according to the ultrasonic principle.

The multiple water quantity control system in modular design that is available in several versions fulfils not less than three requirements at the same time. It combines the advantages of the conventional water distributors, the impulse cooling systems and the continuously operating temperature control units while eliminating the disadvantages of each of these systems. The temperature control system disposes of up to 128 individually adjustable circuits and is suitable for the processing of polyolefins and technical thermoplastic materials. In case of the basic execution (itd B) the requested flow rate is adjusted manually and is then monitored by a flow meter and presented digitally and graphically on the central display of the control unit. In the standard execution (itd R) the water quantity is individually set for each circuit at the central operating unit and - if necessary - is readjusted automatically via a water quantity regulation valve within adjustable limit values.

With the decentralised solution, gwk adds a machine series that offers a high level of flexibility for numerous applications to its portfolio. The customer can individually and precisely set the ideal cooling water temperature for every production machine and for every process in production. Thanks to the direct connection to the consumer, there are no thermal losses, but instead a high flow rate and constant pressure. The weco wd series consists of easy to operate plug&play machines that can easily be installed and commissioned. Three processes can be run with the solution: Free cooling, refrigeration process for low temperatures down to -5°C and temperature control up to 90 °C –everything can be chosen as desired. There is a total of four models with cooling powers between 14 kW and 36 kW (at 15 °C feed flow temperature) and heating powers between 9 kW and 36 kW.

MIXACO Laboratory Mixer HM LAB: The 4-in-1 Heating Mixer for the Laboratory Mix & heat 5 to 20 liters fully automatically: The HM LAB modular laboratory mixer from MIXACO is the latest innovation for use in your laboratory. The wide range of applications and easy handling make it the most flexible mixer solution for your lab. It is a highly standardized all-in-one solution and revolutionizes the entire laboratory work. * fully automated processes * interchangeable vessels in 4 sizes * for demanding mixing applications * heating with full temperature control * quick couplings for compressed air, temperature control fluids, electrical systems * cloud monitoring via the innovative MIXACO Control Center

For thermal insulation Temperature controlled up to 55 °C Optionally ULTRA.sens® or INFRA.sens® With dust filter Temperature range 5°C - 45°C