Results for
TROTEC GMBH
Germany
Here, an overview of some practical benefits of the TEH 30 T: Extra thermally insulated hose connections with supporting ring for extra grip Extremely easy-maintenance construction Very low heating of outer sheath Tried and tested German industrial design - protected prototype Multistack capability Robust TEH 30 T electric heater - Some technical details: Heat output in kW: 3,3 Heat output in kcal: 2837 Amount of air: 300 m³/h Temperature increase ΔT: 54 °C Power consumption: 13,4 A Power socket: 16 A / Schuko Supply voltage: 230 V / 50 Hz Thermostat: yes Mobility: Portable Sound level: 63 dB (A) Length x width x height: 325 x 260 x 332 mm Weight: 10,6 kg Hose connection: 155 mm
Request for a quoteTROTEC GMBH
Germany
Here, an overview of some practical benefits of the TEH 100: Extra thermally insulated hose connections with supporting ring for extra grip Extremely easy-maintenance construction Very low heating of outer sheath Tried and tested German industrial design - protected prototype Multistack capability Robust TEH 100 electric heater - Some technical details: Heat output in kW: 9 - 13.5 - 18 Heat output in kcal: max. 15.400 Amount of air: 1.785 m³/h Temperature increase ΔT: 38 °C Power consumption: 27,2 A Power socket: 32 A / CEE plug Supply voltage: 400 V / 50 Hz Thermostat: Accessory Mobility: Wheels Sound level: 69 dB (A) Length x width x height: 400 x 400 x 480 mm Weight: 29,5 kg Hose connection: 300 mm
Request for a quotePFLITSCH GMBH & CO. KG
Germany
Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.
Request for a quoteFILLTECH GMBH
Germany
Our experience in filling cylinders has enabled us to develop our own pump technology which has proved its worth in a number of fields in addition to filling cylinders. Pump aggregate NP 10/15 Performance Min./Max.: 150-300 kg/h 0.6-1.2 gal/min Power cons.: 1,5 kW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH): 600x400x500mm Weight: 40 kg Pump aggregate NP 25/50 Performance Min./Max.: 400-1000 kg/h Power cons.: 3,0 kW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH): 800x600x500mm Weight: 85 kg Pump aggregate NP 25/70 Performance Min./Max.: 600-1500 kg/h Power cons.: 4,0 KW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH):800x600x500mm Weight: 85 kg The following stats are valid for all pumps: Materials Valve casing: Special brass / cast bronze Valves: High grade stainless steel Plunger: Ceramic Sleeves: CO 2/N 2O – resistant compound; fabric reinforced Support rings: Teflon with graphite, run-dry-proof Crankshaft: Drop-forged and case hardened Pump
Request for a quoteWALTHER TROWAL GMBH&CO.KG
Germany
THE EFFICIENT SOLUTION FOR SMALL PRODUCTION SERIESAre you looking for a solution that is a more economical choice than a larger Trowal system? Then look no further than our E5 mini barrel. It is perfect for deburring and abrasion, above all on small workpieces from the optical and fine mechanics industries. The double-conically shaped rotating barrel body generates an intense rotation to achieve the perfect abrasion result. SOPHISTICATED TECHNOLOGY The mini barrel stands on a steel sheet construction with four pedestals. The barrel bodies are secured to a drive roller and support roller with locking rings. The barrel body is made from polyurethane and the quick-action cap is waterproof. SPECIAL EQUIPMENT It is also possible to attach two additional barrel bodies if necessary. These are driven via a roller system that is fully variable thanks to a three-phase motor. The cover can also be ordered with safety switches.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
Spiral rings are mounted on standard rollers and used to clean conveyor belts. When the idler roller rotates, the spiral rings move the dirt from the center of the belt outwards through a tumbling motion. The spiral rings (rubber rings) from FTK Förderband Technik Kilian GmbH are permanently fixed on the conveyor roller and are characterized by their abrasion resistant quality. In addition to the tried and tested standard, we also manufacture rings in special quality, e.g. B. white food quality, oil and fat resistant or for the extreme temperature range ( 40 ° C to 180 ° C).
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
Support disks on idlers bridge larger distances to the conveyor belt. They support the belt and are preferably used in sidewall belts or profiled conveyor belts. The support disks (rubber rings) from FTK Förderband Technik Kilian GmbH are permanently fixed on the conveyor roller and are characterized by their abrasion resistant quality. In addition to the tried and tested standard, we also manufacture rings in special quality, e.g. B. white food quality, oil and fat resistant or for the extreme temperature range ( 40 ° C to 180 ° C).
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
Buffer rings absorb the falling energy of the conveyed goods and thus protect the belt from damage. The buffer rings (rubber rings) from FTK Förderband Technik Kilian GmbH are permanently attached to the conveyor roller and are characterized by their wear resistant quality. In addition to the tried and tested standard, we also manufacture rings in special quality, e.g. B. white food quality, oil and fat resistant or for the extreme temperature range ( 40 ° C to 180 ° C).
Request for a quoteFRIEDRICH VOLLMER FEINMESSGERÄTEBAU GMBH
Germany
Precise even with low strip tension The segment rolls were developed specially for use in stretch bending levellers. The extremely free-running measuring rings permit high-precision shape measurement even with very low strip tensions. A rigid tubular section which forms the shaft of the roll supports several pivotably mounted measuring rings. They form the outer shell of the measuring roll over which the strip passes. Force sensors inside the measuring rings detect the force resulting from the strip tension. The sensors have high resolution, are overload-proof and maintenance-free. The data are transmitted through the centre axis of the roll and output as a Profibus signal.
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
Due to its abrasion resistance and durability, polyurethane is well suited for use in the conveyor industry. Support rings for support rollers made of polyurethane are characterized by a very high wear resistance. In addition, the material is largely resistant to mineral and vegetable oils.
Request for a quoteHEUTE + COMP. GMBH + CO
Germany
Using the materials mentioned, HEUTE+COMP. manufactures sealing elements and O-ring supports according to your specifications. PTFE support rings prevent high pressures from extruding O-rings into sealing gaps and damaging the rings as a result. Due to its cold flow characteristics and high degree of abrasion, pure PTFE is only conditionally suitable for sealing. Accordingly, a wide range of PTFE compounds have been developed to account for all involved parameters. Temperature Media influence Pressures Sealing gaps Assembly conditions Additionally for dynamic applications: Material and surface of the sliding counterpart Speed The technique used to process a material also influences its properties. For instance, a material filled with glass can be made gas-tight through special heat treatment. For this reason, our team offers consultancy early on during the development phase in order to select appropriate materials for your application.
Request for a quoteResults for
Support rings - Import exportNumber of results
12 ProductsCompany type