Stripping - Import export

safety factor: 7:1, material 100 % polyester with special reinforcement – reduced elongation. Easy to handle, light weight and insensitive to heat, cold or moisture; temperature range: -40°C bis +100°C. For safe lifting of load

Self-adhesive strips with plastic-coated filing bar for organising punched documents in folders and the like. • FLEXIFIX® self-adhesive filing strips for attaching punched documents • Filing strips stick to smooth surfaces in files, document files and lever arch files

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For cutting hard and soft wires • With cable stripper function for all common cables ranging from Ø 8 mm to Ø 13 mm • For accurate, fast and safe stripping of all common round cables • Cutting edges inductively hardened • Precision cutting edge for the finest wires • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• With protection cap • Blade with narrow, straight blade for fine cable work • With fixed blade • Ergonomically designed multi-component safety handle made of tough elastic, impact-resistant plastic with integrated soft zone • Insulation according to DIN EN/IEC 60900 • Blade made of stainless steel, hardened

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

Differentiation between DIN / EN and ANSI Eyeglass blinds according to DIN differ from eyeglass blinds according to ANSI in terms of pressure levels, sealing strips and materials. In German-speaking countries, glasses blind disks are also called blind disks or throttle disks. However, the English terms “spectacle blind”, “blind paddle” are also often used in Germany. Pressure levels according to DIN / EN The following pressure levels for blanking disks according to DIN are available PN 6, 10, 16, 25, 40, 63, 100, 120, 160 and 250. Sealing strips The following shapes are available for sealing strips: A, B1, B2, C, D, E, G and H. Materials The steel materials P 265 GH and P 355 NL are available. In the stainless steel area, the materials 1.4541, 1.4571 and 1.4307 are possible.

Roll Feeds with servo drive They revolutionized the advancement of strip material in the early 1980’s. However, Air Feeds became far from obsolete over 90 different GSWModels show that even today demands for costs, material geometry or composition as well as mounting situations more than justify this technology.

Anchor profile for dividers, without scanner profile;

Micanite is a kind of insulation paper which is impregnated with a heat resistant binder and afterwards pressed in several shifts under heat and high pressure to plates. This material is heat resistant up to 350 °C, as special construction (Phlogopit) up to 450 °C, and is used for the wire wound formers as well as for the encapsulating cover plates of mica surface heaters. Because of the typical "sandwich"-construction of Micanite Flat Heating Elements and their high watt density it is necessary to use a platen to press the mica heater onto the surface to be heated. Established on the market for round Flat Heating Elements are some standard dimensions (Ø 58 / Ø 65 / Ø 80 / Ø 100 / Ø 160 / Ø 260 mm). But normally Micanite Surface Heating Elements are constructed on customer's request. Mica heaters can be metal sheathed for higher mechanical stability. This makes the heater flexible, so that it is also possible to build a band heater.

secutex – the gentle power against raw impact forces. If screwing or welding is not possible, just glue the secutex where impact protection is required. No problem with the secutex special bonding material. These are the advantages by gluing (nearly) everywhere applicable No drilling or welding necessary Bonding where welding or screwing is impossible Applications Thin to medium thick wood plates Glass and plexiglass Sound absorbing elements Fine wood surfaces Examples Coolhouses Painted, laminated, veneered walls and surfaces According to special requirements A proper bond requires always a good preparation … The following procedure is needed 1. Cleaning of the surface Suitable grease and siliconedissolving cleaning agents are required. This step is important to ensure that there is no dirt on the surface which may be present during the grinding or sandblasting process. 2. Roughening the surface Sandblasting or grinding of the surface are especially suitable here.

Install impact protection For screwing and riveting secutex impact protection with an internal perforated plate can be screwed or riveted in different ways. You can achieve universal impact protection in no time at all. For welding Welding is often the easiest and fastest way of fastening. The various protruding perforated sheet designs allow a very versatile use. For gluing If screwing or welding is not possible, the impact protection can be glued with the secutex special adhesive. Cutting and sawing The secutex material can be sawed with a conventional band saw. The material tries to avoid the cutting tool. Make sure that the wedge angle is as small as possible and adjust the cutting speed if necessary. Milling Use commercially available milling cutters with a small number of teeth. Circumferential speed approx. 200400 m / min, clearance angle ∂ 10 °, clamping angle y 25 °. The use of a drilling emulsion is recommended for cooling and surface optimization. Rotate

Again and again, coils with larger internal diameters than expected have to be processed on coilers. Here the secutex coiler sheath offers a simple and flexible solution to the problem. Enlargement of the internal diameter The handy secutex coiler sheath is simply pushed onto the coil mandrel and enlarges the radius to the required size. The timeconsuming assembly of subcomponents is no longer necessary. Prevention of dents Thanks to the high friction of the secutex material, the coil cannot slip and, in some cases, the contact pressure can be significantly reduced. The typical impressions in the initial winding layers are prevented and material wastage is significantly reduced. The secutex material is extremely wearresistant and, unlike standard rubber, is also oilresistant. The insertion tip helps thread the coils.

Even slight pressure points can negatively influence the static equilibrium of a highbay warehouse. Collision protection for shelf support protects against damage resulting from frontal collision. The hollow chambers in the impactresistant profile cushion the collision energy. The solidsteel profile on the inside prevents buckling.

The design provides protection for the load and lifting device at very low retraction heights. The fixed coating is inseparable from the fork prongs. A crossbeam at the tip of the fork prong prevents the secutex coating from peeling.

The design provides protection for the load and lifting device at very low retraction heights. The fixed coating is inseparable from the fork prongs. A crossbeam at the tip of the fork prong prevents the secutex coating from peeling.

The SZSSL is a specially developed prongprotection shoe for the highest demands. The robust profile constructed from steel with a steel point is especially designed for hard, prolonged use. Surface structures We offer special surfaces for exceptional applications under the influence of water, oil or ice. Speak with your professional consultant today!

The normal version is designed for flexible use. It offers easy and quick handling and is optimally designed for the majority of uses. The specially developed “flexo tip” safeguards loads and prongs. secutex prongprotection shoes are also available in stainless steel, e.g. for the food industry. Surface structures We offer special surfaces for exceptional applications under the influence of water, oil or ice. Speak with your professional consultant today!

The impact protection surface of the prongprotection shoe is semicircular. Round loads, such as concrete pipes etc., can be securely and carefully transported. The slightly angled prong tip makes retracting the load easier. Surface structures We offer special surfaces for exceptional applications under the influence of water, oil or ice. Speak with your professional consultant today!

This prongprotection shoe with textile fabric insert is lightweight and designed for special and flexible use. It is placed on the fork prongs. The prongprotection shoe is optionally available with a textile fabric insert and with fastening brackets. Surface structures We offer special surfaces for exceptional applications under the influence of water, oil or ice. Speak with your professional consultant today!

The secutex forkshank protection is a special design with a hollow profile and foam insert. For example, it is suited to the transport of delicate drums on EURpallets. The colliding of the drums is absorbed through the flexible foam padding, whilst the impact of the pallet is absorbed through the sturdy hollowprofile design. Usages include, for example, transport in the chemical or glass industries. The forkshank protection is attached to the fork shanks via steel bands and is thus easily exchangeable.

Sometimes, the load rests upon the shank of the fork during transport. In these cases, transported goods and the fork shank must be protected from damage. secutex forkshank protection with foam padding is designed for careful load transportation. The degree of compression of the foam is dependent upon the collision. The foam reforms after the stress has subsided. Usages include, e.g. transport of sensitive dry walls, roofing tiles, etc. The forkshank can be fastened with a steel belt to the back of the fork and can be easily exchanged.

Sometimes, the load rests upon the shank of the fork during transport. In these cases, transported goods and the fork shank must be protected from damage. secutex forkshank protection is designed for careful load transportation. Damage to the goods during transport should be prevented. The forkshank can be fastened with a steel belt to the back of the fork and can be easily exchanged.

The flexible dampening layer of foam is particularly wellsuited to sensitive goods and objects with uneven surfaces as it can optimally fit to the contour depending on the burden.

secutex impact protection with elbowdesign and inboard perforated plate are mounted when protection must also extend around the corner. The impact protection elbows can be manufactured to be isosceles as well as asymmetrical.

Impact protection in semicircular version secutex impact protection semicircles are suited for use with round loads that have been processed at the company. The inbound perforated plate prevents longitudinal and lateral straining of the material and allows for easy screwon applications.

secutex buffer pad with internal perforated plate can be bolted and riveted in various ways. Thus you can achieve universal buffer pad at the drop of a hat.

Often welding is the easiest and quickest means of attachment. The various overlapping perforated plate designs enable a wide range of applications. Please note the mounting options and welding instructions!