Silicon - Import export

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point is hot junction insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. Sheathing thermocouples are freely flexible across their entire length. That means the thermocouple can be integrated in the installation point. The temperature to be measured can therefore be registered near the desired measuring point. A possible connection lead permits simple routing up to the measured-data acquisition. Options are available for the element diameter, element and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Silicone, Tmax: +180 °C continuous

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Silicone, Tmax: +180 °C, continuous

Application: Grommet can be fitted in the entrance hole of the connector to prevent moisture and dirt from entering the connector. Has limited strain relief capabilities. Construction: • Silicone ring slit for easy mounting over the wire. Will compress on the wire when cover is fitted.

Silicone tubes are used for the vacuum channels.

Silicone rubber ALWA SIL SH 22 and SH 33 are silicone impression materials. These materials have extremely high mechanical values. In addition, they are very fast to handle and very easy to handle as well. The two-component silicone rubbers cure at room temperature. After mixing the two components, a low viscosity liquid develops, which crosslinks to a resistant and rubber elastic material. During the crosslinking, no exothermic heat is developed. When 1 – 3 % thixotropic agent is added per component, a spreadable mixture is obtained. Area of application: *Flexible casting moulds *Copy moulds *Moulds with undercuts *Polyurethane casting moulds *Concrete casting moulds

Temperature range: -100 °C to +180 °C continuous Wire type: Silicone, Tmax: +180 °C continuous

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point is hot junction insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. Sheathing thermocouples are freely flexible across their entire length. That means the thermocouple can be integrated in the installation point. The temperature to be measured can therefore be registered near the desired measuring point. A possible connection lead permits simple routing up to the measured-data acquisition. Options are available for the element diameter, element and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +750 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Silicone, Tmax: +180 °C

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point is hot junction insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. Sheathing thermocouples are freely flexible across their entire length. That means the thermocouple can be integrated in the installation point. The temperature to be measured can therefore be registered near the desired measuring point. A possible connection lead permits simple routing up to the measured-data acquisition. Options are available for the element diameter, element and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.).

Flexible silicone heaters are resistant to permanent temperatures up to 200°C, with self-adhesive foil 180°C should not be exceeded. Higher temperatures of 230°C are possible for a short time without destroying the heater. The temperature that will be reached within the application, generally is not easy to predict, as there are many influencing factors. In addition to the power, resp. surface load, this also includes mass and type of the material to be heated (thermal conductivity, surface quality, etc.) installation / assembly situation (bonded, vulcanised, clamped, etc.), ambient temperature, air movement and, of course, the control technology used. Application examples for silicone heater mats include: canteen kitchen technology / catering, anti-fog and anti-freeze applications, tool or plate heating in machines, 3D printers, laboratory equipment, composite materials repair, joint curing and much more.

We realize your customize silicone rubber keypad. On the basis of your sample, your specification or technical drawing, we will create an individual offer and support you during the project. We advise you on the selection of suitable materials and offer cost reduction options. We offer you an active co-operation in the development and construction and give suggestions for improvement. For an offer we need: •technical drawing, sketch or pattern •technical specifications, equipment extras •required amount Please send following informations to: info@nh-technology.de One of our engineering experts will contact you asap.

Preformed silicone heaters are useful for diamters as small as 12 mm and up to 100 mm. Rounded silicone heaters are not possible with self-adhesive foil. Spiral Wrap Pre-Formed Silicone Rubber Heaters are suitable for tubes and flexible pipes and hoses with Ø 6,35 mm (1/4"). Spiral formed flex heaters can be used up to Ø 12 mm (the length of the stretchable silicone spiral wrap heater is reduced accordingly). The thickness of our spiral-wrapped silicone strip heaters is 2,2 mm. Also our gas and pump line heaters, most frequently used in the semi-conductor process, are shaped and pre-formed according to the object geometry to be heated. They are designed to regulate temperatures in order to prevent condensation in the line. Current applications here are Semi Conductors, Vacuum Chambers, Wafer Chucks, Valves, Exhaust & Pump Systems.

iglidur® D: low cost material with silicon Low-cost-material with low coefficients of friction and good wear resistance at low loads. iglidur® D is available as cylindrical bearings and plain bearings with flange. Low coefficients of friction at high speeds For low loads Very cost-effective Vibration-damping Lowest humidity absorption

Silicone heaters and Kapton heaters are preferred surface heating elements for laboratory equipment and medical technology due to their easy handling and variety of shapes. Like Kapton polyimide heating foils, silicone heaters are resistant to continuous temperatures of up to 200 °C, with self-adhesive foil up to 180 °C. When designing silicone heaters and Kapton foil heaters, the designer has almost unlimited degrees of freedom. This applies to the minimum and maximum dimensions, which are set within wide limits, as well as to contours and recesses, holes and feed-throughs of any kind. The good shape flexibility of silicone heating mats and foils as well as Kapton polyimide heaters also enables the heating of cylindrical, conical or rounded surfaces. The resistance of polyimides to fungi, bacteria, ozone, weather, ageing and most chemicals, acids and solvents is very good, making polyimide (Kapton) heaters an ideal solution for many critical applications.

Item No.: 685616 Grip tape with silicone cushion Specification Grip tape with silicone cushion Webbing, folded in several layers, stitched, with holes and eyes Model type: C (Customised) Dimensions: approx. 20.0 mm wide Material: Polyester Colour: black Property: non-elastic Packaging: loose in cardboard box

The HSSD - Side Drum Heater is an easy and actual aid to the warming of steel barrels. It has got a higher efficiency than the Insulated Jacket HISD, but no thermal insulating function. For a very quick heating and higher temperatures up to three drum heaters can be used simultaneously for a 200-liter barrel. The Side Drum Heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can of course be made to measure, too. HSSD - Side Drum Heaters are suitable in particular to defrost frozen or other products, thus allowing to empty the barrels rapidly. Soaps, fats, varnishes and oily products can be melted as well, respectively reduced in their viscosity. In addition, the 200-liter element can be used in conjunction with the HBD Base Drum Heater to shorten the heating-up time further.

We can offer flexible heating elements manufactured from three different insulation materials: silicone, polyimide (Kapton) or polyester. Each of these materials possess different properties which make them suitable for diverse applications. Silicone heaters can also be produced in very large sizes, whereas polyimide is significantly thinner and polyester unbeatable in price when it comes to high quantities. All three of them are bespoke products made according to your needs, so within the bounds of what is technically feasible you as the customer can determine almost every feature of your heater. This can include; voltage, wattage, dimensions, shape, sensors, leads, plus much more. Due to their low thermal mass flexible polymer insulated heaters distinguish themselves by a very short response time and excellent controllability.

unprecedented opportunities thanks to newest 3D-print technology: whether ultra-stable up to 103°C/217,4°F heat-resistant plastic parts or elastical silicone up to 65 shore – we can meet your very special needs on a wide range – with a print resolution of up to 15 μm! Realizing ideas quickly: we print your prototypes, devices, models, sales samples, artworks or even final products made of plastics or silicone. For your individual 3d-print, we need your data-model in STEP- or STL-format. We are looking forward to your inquiries!

High speed professional printing machines use silicone oil in the fusing assembly for toner release and to add gloss to the printout. These systems can be found in color as well as monochrome printers. Besides environmental safety, the following properties are important: Thermal stability Tightly specified viscosity Very low volatile content Chemical purity Functionally designed (amino or mercapto modified) Roller Cleaning Agents Toner particles and paper dust accumulate on fuser rollers over time in toner-based printing processes,. This can result in image quality defects and shortened life of fusing components. Periodic cleaning with “Clean Protect” ensures a safe and thorough removal of any residue on the roller surface. Unlike alternative chemical cleaning substances, “Clean Protect” preserves sensitive roller surfaces, ensures defect-free printouts, and promotes longer fuser roller life. Our product is safe and effective. This cleaning solution is applied manually and has mini

The requirements: homogenous and fine-pored cell structure tight tolerances of silicone foam density defined concave or convex surface shape non-stick top coatings (e.g. PFA sleeves) minimal odor through reduction of volatiles (VOC)

Silicone Processing Systems with Silicone Vacuum Treatment

• from high quality stainless steel • suitable for all common spirits also for acid containing drinks and vinegar • for 0.7 to 1 l bottles

• from high quality stainless steel • suitable for all common spirits also for acid containing drinks and vinegar • for 0.7 to 1 l bottles

• for storing, preparing, transporting and serving food • stackable • air tight • freezer safe • microwave and oven safe (without lid) • glass bowl heat resistant up to 280° C • ideal for food and meal prepping • silicone ring easy to remove for resi

• easy-care • very hygienic • comfort-soft-touch handle • silicone element temperature resistant up to 464°F

SANHA produces capillary fittings of the series PURAFIT® - just like our press fittings PURAPRESS® - from the completely lead-free premium material silicon bronze CuSi. This copper alloy is optimally adapted for the use in drinking water systems as it fulfills the strict legal requirements of the Drinking Water Directive. By using lead-free PURAFIT® capillary fittings, installers can always be certain that they will not be subject to any legal claims in case the lead tolerances are exceeded. Also, lead-free fittings satisfy the market's desire for safe and healthy drinking water installations. PURAFIT® capillary fittings from CuSi are tested and certified by all relevant national and international certification bodies and can be used for a wide variety of applications in the sanitary and heating industry

The piping system consists of high-quality NiroSan® SF press fittings with red moulded sealing rings made of FKM and NiroSan® stainless steel system pipes according to EN 10312. Specially made for all applications that require silicone free components. Silicone-free moulded sealing rings are ideally suited to applications such as varnishing and painting industries. All NiroSan® SF press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance.  Certified in accordance with all relevant national and European certification bodies.