Results for
SCHULTE LAGERTECHNIK
Germany
Our bolted shelving is a real storage-technology classic and a low-cost alternative to the SCHULTE plug-in system. To assemble the double-sided bolted shelving, angle profiles and shelves are bolted together. The system perforation in the MULTIplus150 and MULTIplus250 versions allows for flexible design with a whole host of accessories. — Bracing with corner angles — Loading and unloading of the stock items possible from both sides — Short picking routes — Assembly through bolting in the shelves — Height of the shelves can be adjusted in increments of 25 mm — Individual adaptation to spatial conditions and to the stored items with 3 shelf widths — Economically priced alternative to the plug-in system
Request for a quoteSCHULTE LAGERTECHNIK
Germany
— Fast and simple installation, flexible retrofitting possible — Modular adaptation of the shelving thanks to comprehensive range of system accessories and compatibility — Offers single-sided or double-sided use — Suitable for constructing double shelving and multi-level shelving systems — High flexibility and easy exchange of the accessory parts thanks to the MULTIplus perforation system — Manual placing and removal — The load capacity of the MULTIplus shelves can be immediately identified by the stamped mark on the front edge. This prevents overloading.
Request for a quoteSCHULTE LAGERTECHNIK
Germany
Plug-in shelving is ideal for placing and removing items by hand. Thanks to its plug-in connection, the shelves are quick and easy to assemble and also offer a higher maximum load capacity than shelves with a bolted connection. They can be installed for single and double shelving as well as for multi-storey shelving systems and have a special system perforation that makes changing accessories easy. — Bracing with cross brace — Simple alignment of the shelf through turnbuckles on the cross braces — Ideal for constructing rows of shelving in front of walls and as back-to-back double shelving — Height of shelves can be adjusted in increments of 25 mm — Individual adaptation to spatial conditions and to the stored items with three shelf widths — Suitable for constructing multi-level shelving systems — Faster assembly thanks to simple plug-in system for shelves — Economically priced bracing variations — Possible to increase the bay load through additional side elements
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
Aluminum support processing.
Request for a quoteOHRA-REGALANLAGEN GMBH
Germany
Cantilever racking systems are highly load-bearing storage systems intended for storage of long and/or bulky storage materials. Such goods include timber, wooden boards, metal sheets, sections, beams or steel elements, building materials but also scrap cars and all kinds of heavy loads. Cantilever racking by OHRA is distinguished from standard racks using solid steel sections for all load-bearing elements. Thanks to this slim construction of our racks a high storage capacity can be achieved across a small floor space. There are specific types of cantilever racks for every product and for every industry. They differ based on requirements, height, useable depth, load-bearing capacity or section thickness. All cantilever racking are produced individually according to customer requirements; they are equipped with a high-quality powder coat or hot-dip galvanised for outdoor storage.
Request for a quoteVKF RENZEL GMBH
Germany
Fix the DBRU shelf edge rail to the metal shelves of your electrical retailer, DIY store or food retailer. The magnetic scanner rails are also ideal for equipping your shelves in the warehouse and production. The price rail is quickly attached to metal shelves using magnetic tape on the back and can also be removed again without leaving any residue. Choose from three different versions of the magnetic back. The magnetic DBRU rail is available with a transparent or white back. Choose the insertion height that suits your price labels and equip shelves in different sectors with the practical scanner rail.
Request for a quoteVKF RENZEL GMBH
Germany
For use with Tegometal shelving.
Request for a quoteVKF RENZEL GMBH
Germany
For Linde, Storebest, Tego and Adams shelving.
Request for a quoteVKF RENZEL GMBH
Germany
To clip on to scanner profiles, hinged.
Request for a quoteVKF RENZEL GMBH
Germany
For use with Tegometal shelving.
Request for a quoteVKF RENZEL GMBH
Germany
Fix the shelf edge rail DBR to the metal shelves in your electronic, DIY or food store. The magnetic scanner rails are also ideal for equipping your shelves in storage and production. The price rail is quickly attached to metal shelves via magnetic tape on the back and can also be removed again without leaving any residue. Choose from three different versions of the magnetic back. The magnetic DBR rail is available with transparent or white back. Choose the insertion height that suits your price labels and equip shelves in various sectors with the practical scanner rail.
Request for a quoteVKF RENZEL GMBH
Germany
Scanner Profile / Shelf Edge Strip "TE 39" for Tego metal shelving. A packing unit contains 100 pieces of profile in selected colour and length.
Request for a quoteVKF RENZEL GMBH
Germany
For 5-10 mm thick glass and wooden shelves.
Request for a quoteVKF RENZEL GMBH
Germany
For 39 mm high tickets, for 16-18mm wooden shelves, hinged, Colour: transparent
Request for a quoteVKF RENZEL GMBH
Germany
For 18-20 mm thick wooden and metal shelves.
Request for a quoteVKF RENZEL GMBH
Germany
The price profile "GLS" is designed for glass shelves and is particularly easy to handle. Due to the design of the profile, the price rail easily slides onto the shelf and is suitable for glass and wooden shelves with a thickness of 5-10 mm. Residue-free and quick removal is possible at any time without difficulty. We deliver the shelf edge profile "GLS" in white or transparent with transparent front side. We also offer you a choice of different insertion heights. Depending on the size of your shelf labels, you decide on the suitable version of this price profile. Adapt them to your shelf system. We deliver the desired length according to your specifications. The indicated price is per meter.
Request for a quoteVKF RENZEL GMBH
Germany
For Wanzl and Wire-Tech wire shelves with 2 horizontal wires.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
VKF RENZEL GMBH
Germany
For Wanzl and Wire-Tech wire shelves, with 2 horizontal wires, hinged.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
Insert trays for carousel shelves, wire baskets and bottle drawers round off the AGOFORM range. Matched in shape and colour, the trays provide a safe and secure place for provisions. The insert trays are available for all currently available units.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
Insert trays for carousel shelves, wire baskets and bottle drawers round off the AGOFORM range. Matched in shape and colour, the trays provide a safe and secure place for provisions. The insert trays are available for all currently available units.
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Mobile, height-adjustable computer table with 2 shelves. With pull-out keyboard shelf. • Flexible workstation with retractable keyboard shelf • Height adjustable between 550 and 630 mm • Mobile and safe to move (4 castors, 2 with brakes) • Two hard-wearing shelves (19 mm) ideal for storing a monitor, printer, folders, etc. • Easy assembly with instructions enclosed • Sturdy frame made from scratch-proof steel with fibreglass-reinforced plastic corners
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Office trolley with two shelves and stable steel frame. Bottom shelf with anti-tilt edges for folders and the like. • Flexible multi-functional trolley for the workplace • Mobile and safe to move (4 castors, 2 with brakes) • Used to store electronic devices and paper on 2 hard-wearing shelves (19 mm thick) • Safe storage of folders and paper thanks to raised, anti-tilt edges • Easy assembly with instructions enclosed • Sturdy frame made from scratch-proof steel with fibreglass-reinforced plastic corners
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Self-adhesive labels for marking shelves, cupboards, containers, etc. • Self-adhesive LABELFIX® labelling windows • Self-adhesive windows for labelling filing trays, shelves, drawers, cabinets and technical appliances • Open on both sides, can be cut to size • Shelf windows with PC-printable blank insert sheets. • Dimensions: 200 x 10 mm (W x H)
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Mobile computer trolley with height-adjustable monitor and keyboard shelves. Bottom shelf provides additional storage space. • Flexible workstation with height-adjustable monitor and keyboard shelves • Mobile and safe to move (4 castors, 2 with brakes) • Three hard-wearing shelves (19 mm) ideal for storing a monitor, printer, folders, etc. • Easy assembly with instructions enclosed • Sturdy frame made from scratch-proof steel with fibreglass-reinforced plastic corners
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Office trolley open on three sides with 6 shelves for folders, office equipment, etc. • Versatile multifunctional trolley for storing electronic devices and office utensils • Mobile and safe to move (4 castors, 2 with brakes) • Six sturdy shelves (16 mm) to hold folders, paper and office appliances, etc. • Open on 3 sides for easy access • Easy assembly with instructions enclosed • Each shelf can hold up to 25 kg. Total load-bearing capacity 60 kg
Request for a quoteSCHULTE LAGERTECHNIK
Germany
The storage of car parts requires both solutions to accommodate bulky goods and the ability to store sensitive goods (such as already painted body parts) without damage. Whether it is packed goods, body parts, tyres or rims - with installation kits from SCHULTE Lagertechnik everything is in perfect hands. — tyre-protecting storage through optimised tyre cross beams or storage on rounded wide span spars — Racks for small, medium and large parts storage — all car racks have the 25 mm grid perforation — Can be combined with the entire connector system — various accessories — special car shelf sets — Construction of multi-storey racking systems possible — individual adaptation to different wheel, tyre and rim sizes — quick assembly by simply plugging in the levels — tyre-protecting storage of the wheels through specially shaped cross beams — optimised height 2,750 mm for the storage of SUV wheels — variably applicable for wheels with 550 - 750 mm Ø
Request for a quoteSCHULTE LAGERTECHNIK
Germany
The WS 2000 wide-span shelving is designed for long items and to handle large widths. Construction heights of up to 7.5 metres can be achieved. The fact that it can be combined with the SCHULTE plug-in system and available accessories makes the WS 2000 an ingenious shelving system for a range of applications. — Placing and removing items by hand from both sides — Maximum shelf load: 400 kg — Maximum bay width: 2500 mm — Construction heights of up to 7.5 m can be achieved — Storage either on steel shelf levels, 19 mm chipboard or in wire baskets — Height of levels can be adjusted in increments of 25 mm — Individual adaptation to spatial conditions and the items being stocked with 4 shelf widths — Large storage volume in a small space — Galvanised
Request for a quoteSCHULTE LAGERTECHNIK
Germany
Pallet racking from SCHULTE Lagertechnik is the optimum solution for storing heavy items. In the pallet racking, pallets can be stored either horizontally or vertically. — High shelf loads up to 4,450 kg and bay loads up to 24.5 t as standard — Single-piece frame profile up to 12 m high — Height of beams can be adjusted in increments of 50 mm — Structural analysis in accordance with EN 15512 — Placing and removing items using storage and retrieval systems and industrial trucks — Particularly stable with framework strutting in the frames — High length and joint rigidity through cold-formed box profiles with welded brackets — Intermediate heights of the frames and intermediate lengths of the beams can be supplied — Long-term planning security thanks to standard frames — Easy to erect by simply hanging in the beams — System accessories for optimum storage of flat pallets, pallet cages and other loading aids thanks to system accessories
Request for a quoteResults for
Shelving - Import exportNumber of results
31 ProductsCompany type