Results for
GSW SCHWABE AG
Germany
GSW Shears find their place in CutToLength Lines or as Scrap Choppers. They are used to perform lasting and costefficient, no matter the roughness of the environment. Our pneumatic and hydraulic Shears are designed efficient in any way – and from 60 to 1500mm width The pneumatic machines run with up to 500 SPM while their heavy types are robust enough to lastingly process up to 3mm thick materials. Since they do not need hydraulic power or electric controls, they are extremely costefficient. If a combination of high SPM and thicker materials is necessary, our TSHL „light“ hydraulic Shears offer the solution. The TSHS series machines are built very heavy and stiff which allows them to cut up to 12mm thick materials. If yet larger widths than 1500mm are to be processed, we work together with most reliable German partners who supply us with highquality Shears in hydraulic, electric or servoelectric design. This way we can offer the very best suitable solution for any application.
Request for a quoteGSW SCHWABE AG
Germany
Our sequence-controlled system includes a precision welding head and precise cutting and positioning devices. The two integrated Hydraulic Shears and the strip clamps can be moved so that the leading and trailing strip ends can be fitted precisely. For those who like it less automated but more cost-effective, we have developed a simpler technology – using just one Hydraulic Shear and fixed clamps. The strip ends are positioned manually here – this is supported by an easily accessible hand lever to individually activate the pneumatic clamps. A double edge guide with vertical rollers centers the new strip and can be adjusted also decentral for alignment. The actual welding process is taken over by the operator himself.
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For straight cuts • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For uninterrupted, straight and figure cuts • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For short, straight and figure cuts, large radii • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteGSW SCHWABE AG
Germany
shock dampening for low operating noise levels absolutely sturdy and warpresistant body design with heavy doublepost guides to smoothly cut even toughest materials with adjustable blade clearance for a most precise cut at any thickness very precise blades made of special steel high operating safety through material guide at entrance and protective cover springactuated hold down clamp (from 250 mm stock width) top/bottom dead center control to monitor blade position counter control mounting bracket hydraulic power units in different sizes electrical control
Request for a quoteGSW SCHWABE AG
Germany
With 2,5 degree cutting angle for clean, burrfree edges With adjustable blade clearance for a most precise cut at any thickness Very precise blades made of special steel High operating safety through material guide at entrance and protective cover Springactuated hold down clamp (from 250 mm stock width) Top/bottom dead center control to monitor blade position Counter control
Request for a quoteGSW SCHWABE AG
Germany
Also Slitting Lines do of course belong to the family of Cutting Lines. They are suitable especially for such customers who have to control a large portfolio of coil widths within their production. And if you build quality products you need quality even in your primary material. Finding it requires a good Steel Service Center but can be costly and unavailable at time of need. So why not cut your own coils? Our Slitting Lines are optimized for smaller batches and provide flexibility supporting your deadlines.
Request for a quoteGSW SCHWABE AG
Germany
Cut-To-Length Lines are core competence at GSW. They belong to the family of Cutting Lines and are designed to process diverse materials out of steel, non-ferrous metals or aluminum and precisely cut a coil into sections of equal length (which is where the name comes from). Starting with narrow slit strip and finishing somewhere beyond 2000mm width – our Cut-To-Length Lines always know how to shine in this process.
Request for a quoteSTEINSTOSSER & SCHMACHTENBERG GMBH & CO. KG
Germany
This how each cut is made Sheet metal is available in a very wide range of materials and alloys. The criterion for machining is a given toughness and strength to make the metal sheets deformable. A part of sheet metal machining is separation by shearing, in which the sheets are divided by two shearing knives. For over 40 years, we have supplied shearing knives in lengths up to 4,190 mm in qualities and hardnesses specially matched to the purpose for the corresponding machines. By using peripheral grinding machines, we can comply with the tightest form and position tolerances, which is why so many machine manufacturers rely on the quality of our shearing knives.
Request for a quoteSTEINSTOSSER & SCHMACHTENBERG GMBH & CO. KG
Germany
Market leader with OEM quality In principle, metals can be melted on numerous occasions and reworked. This is, therefore, conventional recycling, , as a new product with similar properties and of identical quality comes from a starter material. In addition to hammer axes, the scrap shearing knives used in this industry are in our product range. Since the beginning of scrap recycling, our clients have relied on our highly accurate and extremely robust shearing knives and, even today, we are, with our 100 years of experience, a market leader in this sector. You find our Webshop https//shop.buchholzgruppe.eu/shop/
Request for a quoteSTEINSTOSSER & SCHMACHTENBERG GMBH & CO. KG
Germany
Rotary shear knives made from tool and PM steels in the highest OEM quality with a hardness of up to 60 HRc. CNCcontrolled machines guarantee you tight and consistent form and position tolerance for the knives. Inquire now.
Request for a quoteSTEINSTOSSER & SCHMACHTENBERG GMBH & CO. KG
Germany
Trimmed for peak performance The construction industry is booming – and this has been the case for decades and all across the world. The need for new buildings, bridges and general infrastructure is constantly increasing. In terms of modern urban development, the demolition of buildings that are no longer up to date is part of everyday life. The stress on the tools used for this is easy to imagine. Demolition shears are used, for example, to cut angle iron or wire mesh, or to cut concrete ribs and steel rods. Our shearing knives or shear blades for mobile demolition shears are designed exactly for these massive stresses and have been used for many years on construction sites all over the world.
Request for a quoteGSW SCHWABE AG
Germany
shock dampening for low operating noise levels thanks to a heavy overall frame and the sturdy, warpresistant design with heavy doublepost guides even toughest materials can be cut smoothly with adjustable blade clearance for a most precise cut at any thickness very precise blades made of special steel high operating safety through material guide at entrance and protective cover springactuated hold down clamp (from 250 mm stock width) top/bottom dead center control to monitor blade position counter control mounting bracket hydraulic power units in different sizes electrical control
Request for a quoteGSW SCHWABE AG
Germany
Shock dampening for low operating noise levels Sturdy, warpresistant design with heavy doublepost guides With adjustable blade clearance for a most precise cut at any thickness Very precise blades made of special steel High operating safety through material guide at entrance and protective cover Springactuated hold down clamp (from 250 mm stock width) Top/bottom dead center control to monitor blade position Counter control Mounting bracket
Request for a quoteGSW SCHWABE AG
Germany
Shock dampening for low operating noise levels Sturdy, warpresistant design with heavy doublepost guides With adjustable blade clearance for a most precise cut at any thickness Very precise blades made of special steel High operating safety through material guide at entrance and protective cover Springactuated hold down clamp (from 250 mm stock width) Top/bottom dead center control to monitor blade position Counter control Mounting bracket
Request for a quoteSTEINSTOSSER & SCHMACHTENBERG GMBH & CO. KG
Germany
Market leader with OEM quality In principle, metals can be melted on numerous occasions and reworked. This is, therefore, conventional recycling, , as a new product with similar properties and of identical quality comes from a starter material. In addition to hammer axes, the scrap shearing knives used in this industry are in our product range. Since the beginning of scrap recycling, our clients have relied on our highly accurate and extremely robust shearing knives and, even today, we are, with our 100 years of experience, a market leader in this sector. You find our Webshop https//shop.buchholzgruppe.eu/shop We also supply you the necessary machine parts (knife seat and knife holder) for the overhaul of your shear.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TRANSFLUID® MASCHINENBAU GMBH
Germany
There are many good reasons to separate tubes chiplessly. And first of all, of course, the cleanliness. Precision and output, too, are not insignificant. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can be formed immediately afterwards. That saves time and money. Technical specifications: Separation efficiency: max. Ø 105 x 3 mm Shortest separation length: - 100 mm (without pull apart) - 170 mm (with pull apart) Cycle time: 5-10 sec. (depending on material, diameter, wall thickness and cutting length)
Request for a quoteTRANSFLUID® MASCHINENBAU GMBH
Germany
There are many good reasons to separate tubes chiplessly. And first of all, of course, the cleanliness. Precision and output, too, are not insignificant. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can be formed immediately afterwards. That saves time and money. Technical specifications: Separation efficiency: max. Ø 28 x 2 mm for stainless steel tubes Shortest separation length: — 25 mm (without pull apart) — 55 mm (with pull apart) Separation efficiency: up to 2,000 pcs per hour
Request for a quoteTRANSFLUID® MASCHINENBAU GMBH
Germany
There are many good reasons to separate tubes chiplessly. And first of all, of course, the cleanliness. Precision and output, too, are not insignificant. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can be formed immediately afterwards. That saves time and money. Technical specifications: Separation efficiency: max. Ø 50,8 x 2,5 mm Shortest separation length: - 25 mm (without pull apart) - 55 mm (with pull apart) Separation efficiency: up to 2,000 pcs per hour
Request for a quoteSTEINSTOSSER & SCHMACHTENBERG GMBH & CO. KG
Germany
State of the art machines, tightest tolerances Machine knives for use in steel production are challenging from a production engineering point of view and place enormous demands on quality. A knife change always entails a long and thus costly system shutdown; consequently, long knives and circular knives from our company are characterised not only by very high accuracy, but also by their extreme resistance to wear. In the past, we have made serious investments in our machine fleet, in order also to produce to the most complicated geometries and tightest tolerances. In addition to standard qualities, we also deliver special qualities for particular stress at high temperatures.
Request for a quoteSTEINSTOSSER & SCHMACHTENBERG GMBH & CO. KG
Germany
Costconscious use of resources Every year in Germany, several million refrigeratorsare disposed of . With this enormous volume, refrigerators are certainly counted among the most important recycling products. After removing the chlorofluorocarbons, in a second step the housings are broken down into their individual components – iron, aluminium, copper and plastics. These are then made available again to industry as secondary raw materials. We equip our clients with extremely tough and hardwearing shredder disks and thus contribute to costconscious handling of resources.
Request for a quoteSTEINSTOSSER & SCHMACHTENBERG GMBH & CO. KG
Germany
Recycling made easy Our machine knives, of uncompromising quality, have been used for decades in recycling for tyre crushing. Even when separating rubber and spring steel, they have been proven in practice day by day. Whether shredder knives, spacers, scrapers or sealing gaskets, shredder teeth for multipleshaft shredders, rotary and stator knives for granulators or machine knives for guillotines Our complete range of products also covers the most demanding challenges in recycling.
Request for a quoteGEBRÜDER LÖDIGE MASCHINENBAU GMBH
Germany
The high-shear mixer is a system for mixing, granulation of pharmaceutical powders and granulated products. Moreover, it is suitable for a wide range of cosmetics and food products. A three-bladed mixing tool rotates in a vertical, cylindrical mixing vessel close to the wall and to the bottom of the vessel. The shape and peripheral speed of the mixing tool create a vortex-like circulation of the mix. A separately driven chopper is used for breaking up agglomerated products as well as for moistening and granulation. Liquid addition is either gravimetric or uses a pump to add liquid directly to the effective range of the chopper, so that the best possible distribution is ensured. The optional wet sieve on the discharge ensures a completely homogeneous distribution of the granulate size. The PC/PLC-based control system to be compliant with CFR-21 Part 11. The updated user interface permits intuitive machine operation in service and automatic mode for production and cleaning operation.
Request for a quoteWINTERHOFF PICARD GMBH
Germany
Durable smooth cuts in tough composite materials and resilient aluminum along with punch openings for spouts are important tasks that our composite knives fulfill admirably.
Request for a quotePOLYPLAST MÜLLER GMBH
Germany
Processing aids are used in many applications for the optimization of processing conditions to avoid problems in the end product. The melt flow of the polymer in the extruder is improved and the shear forces during transfer to metallic walls are reduced by the fluoropolymers present. Material output can be increased by adding processing aids, and energy costs can be lowered thanks to pressure reduction. They are also an effective remedy for problems like shark skin and nozzle deposits.
Request for a quoteWESTMARK GMBH
Germany
• cuts poultry accurately and cleanly • with a toothed edge and integrated bone breaker • with inner spring and locking mechanism • with plastic-covered handles for comfortable cutting
Request for a quoteResults for
Shearing - Import exportNumber of results
28 ProductsCompany type
Category