Push-pulls - Import export

PROFI 6 TI LM JDN Trolleys Carrying capacities: up to 20 t as manual trolleys (LN) for pushing or pulling the trolleys by hand as reel chain trolleys (LH) for moving the trolleys by unwinding the reel chain as motorised trolleys (LM) powered by an air motor Standard Features easy to install with anti-climb and anti-drop devices robust and with little maintenance able to negotiate curves Options Rack and pinion drive 1 Spark-resistant package 2 Offshore paint 2 Energy Feeding Systems The energy can be fed by various different systems: Energy chain C-shaped rail Square rail Spiral hose 1) From LM 3.2t upwards 2) Not available for LN 1t

Adjustable, Without Free Travel Compression Force max. 50,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 10,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 6,000 N Stroke 50 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 2,000 N Stroke 50 mm Can be regulated separately in any stroke position: The hydraulic dampers in the DVC-32 model are the first model to have the ability to have the in and out speeds adjusted independently from the outside and therefore more precisely. With their individual adjustment segments for the push and pull direction as well as the double-sided action, these are suitable as safety or control elements. The great number of mounting accessories makes assembly of these hydraulic dampers by ACE easier and allows these maintenance-free, ready-to-install and self-contained systems universally applicable. Qualitatively high grade, and at the same time simple to use; one of their uses is to absorb swinging loads.

Adjustable, Without Free Travel Compression Force max. 2,000 N Stroke 50 mm Can be regulated separately in any stroke position: The hydraulic dampers in the DVC-32 model are the first model to have the ability to have the in and out speeds adjusted independently from the outside and therefore more precisely. With their individual adjustment segments for the push and pull direction as well as the double-sided action, these are suitable as safety or control elements. The great number of mounting accessories makes assembly of these hydraulic dampers by ACE easier and allows these maintenance-free, ready-to-install and self-contained systems universally applicable. Qualitatively high grade, and at the same time simple to use; one of their uses is to absorb swinging loads.

high accuracy for feed repeat of +/ 0,05 mm high clamping force to serve even large material crosssections serving a wide variety of materials, such as coil, band, bar or profile stocks or even wires, cardboards, papers and fabrics operation in push or pull mode or combined in pushpull mode special air cylinder design for reduced air consumption feed length adjustment via finethreaded spindle

Compact design, variable length Switching range -20 C to +100 C Transistor output 1 x push pull Stainless steel material

Panel installation housing, IP 67 Input signals of external sensors 4..20 mA/0..10V / 2 x push pull LCD lighting, mineral glass

Panel installation housing, IP 67 Input signals of external sensors 4..20 mA/0..10V / 2 x push pull LCD lighting, mineral glass

Panel installation housing, IP 67 Input signals of external sensors 4..20 mA/0..10V / 2 x push pull LCD lighting, mineral glass

Panel installation housing, IP 67 Input signals of external sensors 4..20 mA/0..10V / 2 x push pull LCD lighting, mineral glass

Lance design and compact design Switching and range up to 200 C 4..20 mA/0..10V/ 1 x push pull Stainless steel material

Lance design and compact design Switching and range up to 200 C 4..20 mA/0..10V/ 2 x push pull Stainless steel material

Material Carbon Steel Surface Finishing Zinc-Nickel, Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push (When mounting the Sleeve in Bulkhead), Push and actuate Push-Pull Sleeve Disconnection Pull (When mounting the Sleeve in Bulkhead), Actuate Push-Pull Sleeve Connect Under Pressure Male Tip Series HU up to the max. Working Pressure allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1 A and ISO 5675 (for selected sizes)

Material Carbon Steel Surface Finishing Zinc-Nickel, Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push (When mounting the Sleeve in Bulkhead), Push and actuate Push-Pull Sleeve Disconnection Pull (When mounting the Sleeve in Bulkhead), Actuate Push-Pull Sleeve Connect Under Pressure not allowed (Male Tip Series HU up to the max. Working Pressure allowed) Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1 A and ISO 5675 (for selected sizes)

Material Carbon Steel Surface Finishing Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -30° C ... +100° C / -22° F ... +212° F Valve Design Poppet Valve Connection Push Disconnection Pull Connect Under Pressure not allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1 Series A, Size 12,5