Results for
NWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For short, straight and figure cuts, small radii • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteBORNEMANN GMBH
Germany
The tool top (stamp) has an internal form, whose bottom part (matrix) has the corresponding opening (see image). These punch units are used in the areas of sheet shaping. Contact I have read and agree to the privacy policy. *Pflichtfelder
Request for a quoteJOKA WERKZEUG- UND MASCHINENBAU GMBH & CO. KG
Germany
Punching units Punching unit with exchangeable cutting elements for sheets and profiles up to a material thickness of 25.0 mm and a hole diameter of 150.0 mm JOKA punching units consist of a special cast stand that accepts the punch and die and ensures the exact axis alignment between the cutting elements (punch and die). In addition, there is a stripping system in the upper part of the tool stand, as the material wipes off automatically after punching. The scraper contains two or more disc spring packages that guarantee perfect scraping even in the border areas. A fixed connection between the tool and the upper part of the press is therefore not required. To determine the exact position, each tool has a positioning pin (two for shaped holes) on the underside, which is precisely aligned with the cutting elements (center of the hole). The above picture shows a complete punching unit without cutting elements and one cutting set (punch and die) each for round hole or shaped hole.
Request for a quoteJOKA WERKZEUG- UND MASCHINENBAU GMBH & CO. KG
Germany
Our specialty is “punching”. We have many years of experience in this area. We also solve your problems with our own tool and system construction.
Request for a quoteJOKA WERKZEUG- UND MASCHINENBAU GMBH & CO. KG
Germany
For the automation of your production, we develop and build semi or fully automatic hydraulic punching systems, tailored to your special wishes and needs.
Request for a quoteJOKA WERKZEUG- UND MASCHINENBAU GMBH & CO. KG
Germany
Press-independent tools, for individual use or integrated in systems.
Request for a quoteJOKA WERKZEUG- UND MASCHINENBAU GMBH & CO. KG
Germany
For punching problems that cannot be solved with punching units in series and special designs, we manufacture tools and devices for every purpose.
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Pin for attaching display panels to holders with punched strips. • Pin for attaching display panels to holders with punched strip • Suitable for use with SHERPA and FUNCTION display panels
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Transparent punched pocket made from PP. With reinforced punched holes 45 x 65 x 45 + 80 mm. • Indelible punched pocket made from polypropylene • With reinforced punched holes • Punching: 45 x 65 x 45 + 80 mm for filing in A5 format ring binders • Open at the top • Format: A5 landscape
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Cover with universal punching for four 3.5” disks + labels. • A4 disk cover with labelling sheets and universal punching for filing in folders and ring binders • For 4 x 3.5” disks
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
For quick filing of non-punched documents. With filing strip. For approx. 30 A4 sheets. 8 per bag. • Spine bars for binding unpunched documents • With rounded corners to facilitate insertion of sheets • Filing strip with universal punching for inserting spine bars in lever arch files and ring binders. • Length 297 mm (A4 format) • Side length 14.5 mm • Filling height 3 mm • Capacity approx. 30 sheets
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
For quick and easy filing of non-punched documents. For approx. 30 A4 sheets. 100 per pack. • Spine bars for binding unpunched documents • With rounded corners to facilitate insertion of sheets • Length 297 mm (A4 format) • Side length 13 mm • Filling height 3 mm • Capacity approx. 30 sheets
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
To protect non-punched documents in combination with spine bars. For approx. 1-100 A4 sheets. 50 per pack. • Polypropylene report covers to protect unpunched documents • For use with A4 format spine bars • Capacity: 1-100 A4 sheets
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For short, straight and figure cuts, large radii • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteFRIMO GROUP GMBH
Germany
A single machine with a combined punching, embossing and joining system The FRIMO CombiCut machine is a specially developed single unit for punching, embossing and joining bumpers and other grained, painted or unpainted exterior plastic components. The CombiCut is very well suited for large-scale production, especially with many variations. This means optional punchings and mounting elements such as parking assistants, headlight wipers, fog lamps, side-markers and trailer hitches can be added just prior to final assembly, reducing inventories and simplifying storage.
Request for a quoteFRIMO GROUP GMBH
Germany
A compact and ergonomic punching machine for high volume production The FRIMO ErgoCut is an extremely compact and ergonomically designed punching machine very well suited for trimming complex and large components in high volume. This includes instrument panels, door panels, center consoles and armrests. The ErgoCut is just under 2.5m tall, which makes it ideal for confined spaces. The components are positioned on the product intake of the lower table, which swings up when the cycle starts. Once locked in place, the punching units located in the fixed upper component begin trimming.
Request for a quoteFRIMO GROUP GMBH
Germany
Economic and high performance punching machine for high volume production FRIMO's EcoCut punching machine is ideally suited for trimming very complex and large plastic components such as instrument panels, door panels and armrests. Its high capacity makes it the optimal choice for large-scale production. The EcoCut has been specifically developed for trimming towards the ram and in many additional punching directions. The product fixture is integrated directly into the lower table. The vertically driven upper tool replaces the press ram.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
WINTERHOFF PICARD GMBH
Germany
Durable smooth cuts in tough composite materials and resilient aluminum along with punch openings for spouts are important tasks that our composite knives fulfill admirably.
Request for a quoteWINTERHOFF PICARD GMBH
Germany
We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.
Request for a quoteVERFAHRENSTECHNIK HÜBERS GMBH
Germany
Preparation of the material components under vacuum and injection into an evacuated mold.
Request for a quoteVERFAHRENSTECHNIK HÜBERS GMBH
Germany
Perfect closing - clamping machines for the APG technology from HÜBERS. HÜBERS' automatic clamping machines permit the productivity advantages of APG systems to be fully realized. The whole system as well as the mould are easily accessible. They can be tilted and rotated around various axes. This enables the moulds to be inserted by automatic lifting devices.
Request for a quoteLICHTGITTER GMBH
Germany
The perforated metal planks, type BN-G “Noppe, geschlossen”, the punched nobs pressed upwards are closed and offer high slip resistance. BN-G gratings are often used in indoor environments and there, where, on the one hand, a closed surface is desired and on the other, good accessibility must be ensured.
Request for a quoteLICHTGITTER GMBH
Germany
With perforated metal planks, type BN-O “Noppe, offen“ the bothsided punched holes have a diameter 8 mm and allows an excellent standing stability. Furthermore the drain holes exhibit good drainage. The BN-O grating guarantees a high stability for normal pedestrian traffic.
Request for a quoteLICHTGITTER GMBH
Germany
The perforated metal plank type BN-OP5 “Noppe, offen plus, 5mm“ was especially developed for pedestrian areas with „High Heel Proof“ requirements. The bothsided punched holes have a diameter of 5mm. The punching sequence corresponds to BN-OP7. This type of planking offers high slip resistance and also allows ladies in stiletto heels to walk safely on the gratings. Due to the small hole configuration it is difficult to see through from underneath, which is important in public access areas. The perforated metal plank type BN-OP8, corresponds to type BN-OP5 in terms of the punching pattern, but have twice the number of holes. The drain holes have a diameter of 8 mm and thereby increase the drainage performance and light and air permeability..
Request for a quote1A STAR TECHNISCHE KUNSTSTOFFE GMBH
Germany
STAR high quality bending film / folding foil is a high quality product, which offers best protection for parts and press brake tools on nearly every press brake machine. It is tested and developed under most difficult conditions. Test our high quality bending film / folding foil / antiscratch film and see, how you can protect your press brake tools, your bended parts and save money by saving time and avoiding extra work! Avoid following problems : Scratches imprints marks other problems caused by the direct contact from press brake tool and part extra work to clean the part after having scratches, imprints or marks scratches on press brake tools
Request for a quoteResults for
Punching - Import exportNumber of results
26 ProductsCompany type