Protective plates - Import export

stainless steel*excellent stability*optimum height for use with Usbeckl aboratory Burners*space saving delivery and storage due to dismountable feet*Added value: Plate holder offers protective mat function

Use: Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc. Mechanical design: • Aluminium front plate, anodised, protected against corrosion. • Measurement circuit numbering, abrasion- and wipe-proof. • Attachments of stainless steel and nickel-plated brass. • The assembly type and design prevent the fitted built-in couplings from being pushed in or out. • The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition. • Individual built-in couplings can be replaced by loosening only a few screws. • Flat, flush front surface enables easy cleaning. • Standard panels with 1

Brass float valves of open design in 3 and 4 inches can be combined with our hollow float balls made of high-quality PE-HD plastic (max. 70 °C), alternatively also with copper or stainless steel balls. The chemical nickel plating provides corrosion protection.

"Use:Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with Connector Mininiature CMP-XX. Mechanical design: • Aluminium front plate, anodised, protected against corrosion. • Measurement circuit numbering, abrasion- and wipe-proof. • Attachments of stainless steel and nickel-plated brass. • Montageart und Konstruktion verhindern ein Hinein- oder Herausdrücken der montierten Einbau-Kupplungen. • The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition. • Individual built-in couplings can be replaced by loosening only a few screws.

Install impact protection For screwing and riveting secutex impact protection with an internal perforated plate can be screwed or riveted in different ways. You can achieve universal impact protection in no time at all. For welding Welding is often the easiest and fastest way of fastening. The various protruding perforated sheet designs allow a very versatile use. For gluing If screwing or welding is not possible, the impact protection can be glued with the secutex special adhesive. Cutting and sawing The secutex material can be sawed with a conventional band saw. The material tries to avoid the cutting tool. Make sure that the wedge angle is as small as possible and adjust the cutting speed if necessary. Milling Use commercially available milling cutters with a small number of teeth. Circumferential speed approx. 200400 m / min, clearance angle ∂ 10 °, clamping angle y 25 °. The use of a drilling emulsion is recommended for cooling and surface optimization. Rotate

Nominal volume: 10 L + with folding, zinc-plated, corrosion-protected steel wire carrying handle + resistant to frost, heat, UV radiation and chemicals + available in green and brown + integrated stacking ribs allow for stacking of the trash/garbage cans + the container’s smooth surfaces are easy to clean + environmental protection: Our pre- sorting containers can be fully recycled at the end of their useful life.

Nominal volume 360 L Nominal loading capacity 144 Kg + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 + resistant to UV, frost, heat and chemicals + emptied by stepped comb-lifting device (shape A), reinforced by additional ribs + equipped with two solid rubber maintenance-free 200 mm diameter wheels; also available with 300 mm diameter wheels + corrosion-protected steel axle, zinc-plated + with integrated chipnest in the frontal comb; accommodates transponders (RFID chips) compatible with the most widely used ID and weighing systems + available in standard colours of grey, green, blue and brown; additional colours available + strong ribs allow for high stacking + with raised edge to prevent water ingress (e.g. during rain) + meets the requirements of EC directive 2000/14 EC.

Nominal Volume: 360 l Nominal Payload: 144 kg + certified waste bins 360 litre + UN-approved for the transport and collection of dangerous materials + wheelie bins marked for clinical waste in accordance with UN3291, packaging group II + liquid-tight / watertight (without drainage hole) + waste container with triangular slamlock + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + clinical / hospital waste bins with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + wheelie bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol + medical waste containers for sharp and pointed instruments, anatomy / pathology waste and infectious waste

Nominal Volume: 240 l Nominal Payload: 96 kg + certified waste container 240 litre + UN-approved for the transport and collection of hazardous goods and hospital waste + wheelie bin marked for clinical waste in accordance with UN3291, packaging group II + liquid-tight / watertight (without drainage hole) + waste bin with triangular slamlock + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste container with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + our waste bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol + waste containers for hospitals & clinical waste

The rubber coated pot magnet is made of small neodymium disc magnets, steel plate, and rubber. These disc magnets are embedded in the steel plate, and then the whole steel plate is coated with rubber. The steel plate well concentrate and enlarge the magnetism of these magnet discs. The rubber which covers the magnets and steel plate protects the magnet from corrosion and also well protect the delicate objects that contact pot magnet from scratch. For the Black Rubber coated pot magnet,Also could be classified as threeRubber Covered Neodymium Pot Magnet with External Threaded Stem,Rubber Covered Neodymium Pot Magnet with internal Threaded hole which is protruded, and Rubber Covered Neodymium Pot Magnet with internal Threaded hole which is no protruded.It consists of iron plus strong Neodymium magnet and Black Rubber.

Nominal Volume: 770 l Nominal Payload: 310 kg + 770 litre certified waste container + UN-approved for the transport and collection of dangerous materials + liquid-tight / watertight (without drainage hole) + waste bin with triangular slam lock + wheelie bins marked for clinical waste in accordance with UN3291, packaging group II and III + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste container with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + Weber waste bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol

Nominal Volume: 660 l Nominal Payload: 270 kg + 660 litre certified clinical / hospital waste containers + UN-approved for the transport and collection of dangerous materials + liquid-tight / watertight (without drainage hole) + waste bin with triangular slam lock + wheelie bins marked for clinical waste in accordance with UN3291, packaging group II and III + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste containers with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + waste bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol

Nominal Volume: 1100 l Nominal Payload: 440 kg + 1100 litre certified waste bins + UN-approved for the transport and collection of hazardous goods + watertight (without drainage hole) + waste containers with triangular slam lock + wheelie bins marked for clinical waste in accordance with UN3291, packaging group II and III + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste bins with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + waste containers meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol

Cable cover plates with increased mechanical protection Manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Length: 1.000 mm Surface colour: red Thickness: 10 mm Labelling: Achtung Starkstromkabel Longitudinal locking: with punched holes and connection pin Possible designs: Cover width: 100 mm to 290 mm Length: 300 mm to 3.000 mm Thickness: 3 mm to 12 mm Material: PE-HD or PVC-U Surface colour: yellow, blue, green, orange, black Longitudinal locking: with or without punched holes and connection pin Labelling: acc. to customer specifications