Results for
SPANSET SECUTEX GMBH
Germany
secutex Impact Protection for screwing This is our top seller – secutex buffer pad with a perforated plate. Easy and flexible to use and can be fixed reliably with the perforated plate as reinforcement. In this way, you will have a universal impact protection in a short time. Size and quantity of the drill holes depend on the substructure and must be specified on site. Selection of the screws We recommend screw sizes up to a maximum of 6mm, any larger dimension does not provide additional strength in combination with the castin perforated plate. As screws we recommend hexagon socket screws with low head according to DIN 7984 or DIN 6912. Not recommended Countersunk screws; inefficient transfer of the force into the impact protection, Bolts with hexagon head; the nut grips the bolt on the outside, the borehole must be much larger for this. Normal screws with hexagon socket; the screw head is significantly higher, the impact protection must be thicker
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
Aluminium perforated sheets are used in order to reinforce the casting resin moulds.
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Micro-perforated A5 insert sheets. Simple computer labelling with free DURAPRINT® software. • Insert sheets in A5 format for DURABLE products: SCANFIX, c-profiles and LABELFIX • Micro-perforated insert sheets • Suitable for copiers and laser and inkjet printers • For professional labelling in your warehouse and production facilities • For items measuring 200 x 30 mm (W x H) • 20 sheets per bag, total of 80 sheets
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Round, steel waste basket with 30 mm wide perforation ring. Capacity: 15 litres. • Round waste paper basket • Capacity: 15 litres • Made from scratch-proof, epoxy resin-coated steel • With a 30 mm wide decorative ring of perforations • Suitable for use in offices, hotels and other prestigious spaces
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Index divider pocket for collecting receipts. With snap-in perforation. • Index divider pocket with snap-in perforation • Ideal for collecting receipts • Tab width: 60 mm • Format: A4 format landscape, 230/240 x 300 mm
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Metal umbrella stand with perforation. Capacity: 28.5 litres. • Metal umbrella stand with epoxy resin coating • With decorative perforated strip • Ideal for entrance areas, offices, shops or the home • Capacity: 28.5 litres
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Micro-perforated, A4 insert sheets for computer labelling. Simple design with free DURAPRINT® software. • Micro-perforated, PEFC certified insert sheets in A4 format • Contains 360 insert sheets in 30 x 65 mm format • For professional printing of name badges • BADGEMAKER® inserts for table place name holders can also be used separately as place cards • For DURABLE products # 8540, 8541
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Micro-perforated, A4 insert sheets for computer labelling. Simple design with free DURAPRINT® software. • Micro-perforated insert sheets in A4 format • For professional printing of logistical pockets • Suitable for copiers and laser and inkjet printers • Easy labelling with free DURAPRINT® software with database function at www.duraprint.de • 240 badges measuring 100 x 38 mm (W x H)
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Micro-perforated, A4 insert sheets for computer labelling. Simple design with free DURAPRINT® software. • Micro-perforated insert sheets in A4 format • For professional printing of logistical pockets • Suitable for copiers and laser and inkjet printers • Easy labelling with free DURAPRINT® software with database function at www.duraprint.de • 80 badges measuring 150 x 67 mm (W x H)
Request for a quoteAMSBECK MASCHINENTECHNIK GMBH
Germany
The centrifugal clutch with perforation enables customers to attach special output elements, such as sprockets, pulleys and articulated shafts or flanges, etc. This way, the centrifugal clutch can be designed individually and precisely fitting. We generally build two different types of centrifugal clutches: One is the standard clutch with profile hub. The other, for special applications, is the centrifugal clutch in the rotating jaw version. This special centrifugal clutch is outstandingly suitable for applications with high oscillations or very high loads.
Request for a quoteWINTERHOFF PICARD GMBH
Germany
Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.
Request for a quoteWINTERHOFF PICARD GMBH
Germany
Cutting, punching, perforating, folding and register cutting are among the most important work steps in the production process. These are the main tasks of our knives – used in a wide variety of ways, for applications on various types of machines. With excellent repeat performance and optimally protected against wear and tear, for highly profitable knife inserts and tool life.
Request for a quoteWINTERHOFF PICARD GMBH
Germany
Durable smooth cuts in tough composite materials and resilient aluminum along with punch openings for spouts are important tasks that our composite knives fulfill admirably.
Request for a quoteWINTERHOFF PICARD GMBH
Germany
Your foil and processing requirements determine our knife design. Regardless of whether the foil should be impermeable or permeable, vacuumable or sealable, tearable or much more, they will be cut reliably with the best possible knife.
Request for a quoteWINTERHOFF PICARD GMBH
Germany
We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils we supply the best knives.
Request for a quoteBAUER GMBH
Germany
Dispense oils etc. from 60 or 200 litre drums, wherever necessary - mobile, safe, simple
Request for a quoteLICHTGITTER GMBH
Germany
The perforated metal plank type BN-OP5 “Noppe, offen plus, 5mm“ was especially developed for pedestrian areas with „High Heel Proof“ requirements. The bothsided punched holes have a diameter of 5mm. The punching sequence corresponds to BN-OP7. This type of planking offers high slip resistance and also allows ladies in stiletto heels to walk safely on the gratings. Due to the small hole configuration it is difficult to see through from underneath, which is important in public access areas. The perforated metal plank type BN-OP8, corresponds to type BN-OP5 in terms of the punching pattern, but have twice the number of holes. The drain holes have a diameter of 8 mm and thereby increase the drainage performance and light and air permeability..
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LICHTGITTER GMBH
Germany
The surface of the perforated metal plank, type BN-GA is a mix of closed punched nobs facing upwards and conical drain holes facing downwards. This means that the grating does not have any sharp edges on top and can be walked on easily even without footwear. At the same time, however, any liquids can be quickly drained through the conical drain holes so that no hydroplaning can occur.
Request for a quoteLICHTGITTER GMBH
Germany
The perforated metal planks, type BN-G “Noppe, geschlossen”, the punched nobs pressed upwards are closed and offer high slip resistance. BN-G gratings are often used in indoor environments and there, where, on the one hand, a closed surface is desired and on the other, good accessibility must be ensured.
Request for a quoteLICHTGITTER GMBH
Germany
The perforated metal planks, type BN-O33 “Noppe, offen” combines top and bottom pressed nubs with a hole diameter of 8 mm: This provides excellent stability and drain holes for a good drainage effect. In combination with the profile BN-O33vi for steps with vi-nosing or the closed profile BN-G33 it results in many applications and variations.
Request for a quoteLICHTGITTER GMBH
Germany
The perforated metal planks, type BN-G33 “Noppe, geschlossen” has upwardly pressed closed nubs and provides a high slip resistance. BN-G33 is suitable for indoor in combination with BN-G33vi stairtreads. BN-G33 is suitable for areas where on the one hand a closed surface is desired and on the other hand a good accessibility must be guaranteed.
Request for a quoteLICHTGITTER GMBH
Germany
Perforated metal planks, type BP-UE are characterized by the highest slip resistance class, their smooth line profiling and high loading capacity. For this reason this type is frequently used in slippery areas and where stringent demands are made on load bearing capacity.
Request for a quoteLICHTGITTER GMBH
Germany
The perforated metal plank type BZ-GP has been developed from our approved planking type BZ-GP. Because of the homogeneous surface it is easy to negotiate. Furthermore the free cross section of 70 % makes a high light permeability and sprinkler suitability possible. Therefore the profile is particularly suitable for suspended ceilings. There is no need for sprinkler systems below the suspended ceiling. Due to the high point loads, additional planking during the assembly or later is not necessary. Thus, an ideal smoke funnel, sprinkler suitability and efficiency are guaranteed.
Request for a quoteLICHTGITTER GMBH
Germany
The perforated metal plank type BN-OD „Noppe, offen , different“ is characterised by two different hole sizes. The bothsided punched holes have upwards a diameter of 14 mm and downwards a diameter of 7 mm.
Request for a quoteLICHTGITTER GMBH
Germany
The perforated metal plank BZ-Gv “Zahn, groß, verkehrt” offers a free cross section of at least 70%. It is therefore suitable for use in intermediate levels. Through the use of BZ-Gv profiles, the there is no need for a sprinkler system below these intermediate levels. Optimal flue exhaust and sprinkler suitability are thus guaranteed.
Request for a quoteAHA ALBERT HAAG GMBH METALLDRÜCKEREI - METALLWAREN
Germany
Perforated and ground hemisphere made of stainless steel
Request for a quoteLICHTGITTER GMBH
Germany
The perforated metal plank BZ-G offers a free cross section of at least 70%. It is therefore suitable for use in intermediate levels. Through the use of BZ-G profiles, the there is no need for a sprinkler system below these intermediate levels. Optimal flue exhaust and sprinkler suitability are thus guaranteed.
Request for a quoteLICHTGITTER GMBH
Germany
The perforated metal plank type BZ offers a high degree of slip resistance due to its serrated surface structure. For this reason, the BZ plank is especially suitable in those environments, where fats and oils are used.
Request for a quoteLICHTGITTER GMBH
Germany
Perforated metal planks, type BP-oN is very interesting for shelving areas, due to the smooth surface without holes or nobs. The type BP-oN is especially interesting for cantilever rackings based on its wide free span.
Request for a quoteResults for
Perforations - Import exportNumber of results
32 ProductsCompany type