Pe pipe - Import export

We stock PE plates, PE pipes as well as custom made products HDPE plates in natural, PE 300, PE 500, PE 1000, in strengths from 2 mm etc PE pipes, pipe connections, PE pipe bends in different dimensions Custom made plastic vessels in accordance with drawing or pattern

optimal PE pipe installation in the cold season (from 5°C ambient temperature) to prevent the machine from freezing

Installation of new PE-100 RC pipes as a pipe string (long pipe) Pipe installation via a starting manhole from 1 m diameter Installation length up to 150 m New pipes OD 192, 242 and OD 292 Tight in pipe means only minimal cross-section loss and small annular space without filling The hydraulic capacity of the new pipe can be in-creased by using pipes with smooth interior lining House connections can be connected without the need for trenches

Telecommunication pipe – cable conduits made of PE-HD on drums or in coils Z.I.S. cable conduits made of PE-HD, manufactured acc. to DIN 16874 with external supervision by MPA, Darmstadt or DIN 16876 Standard design: Material: PE-HD according to DIN requirements Colour: black Inner surface: inside grooves, to reach max. pulling-in and blowing-in length Delivery type: on rental drums or in coils Labelling: to DIN requirements Possible designs: Material: PE80/PE100 acc. to DIN 8074/8075 Coloured: coextruded stripes Outer surface: coloured co-extruded or solid dyed Inner surface: smooth Type: composite pipes – side by side, parallel, loose wound on reel Delivery type: one-way-drums Individual length: on drums or in coils Labelling: acc. to customer specifications SDR types: SDR 33 – SDR 11

Split pipes made of PE-HD with snap-on system For the subsequent protection of cables, which have already been laid, or for repairing damaged pipe systems - Sealed against fine sand - Reusable - No sleeve required - Extendable to any length - The joining of the split pipes does not require any tools - A continuous pipeline is achieved by offsetting the top split pipe (no sleeves required) Use as a repair split pipe: Our 120 mm x 5,0 mm split pipe is constructed in a way that the locking mechanism is on the outside of the pipe, which means that the inner diameter of 110mm is fully usable without dimensional limitations. Therefore, the split pipe can be clamped over the defective cable conduit like a plaster over a wound. You don’t need to saw off the damaged pipe section! Standard design: Material: PE-HD Locking system: snap-on locking Colour: black Length: 3 m

Flange connector with loose insert pipe for optimum grip and durability. Our flange connectors are optimal for higher dimensions. They have an additional seal and a loose insert pipe. With our flange connectors for the application in water systems you are always on the safe side. The connector consists of various components, which can be assembled quick and simple without any special tool. The fixed insert pipe ensures an optimal form of the PE Pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. The additional seals ensure total security. The model is available in different versions. Pipe diameter: 63mm - 110mm Thread sizes: 2" - 4"

Flange connector with loose insert pipe for optimum grip and durability. Our flange connectors are optimal for higher dimensions. They have an additional seal and a loose insert pipe. With our flange connectors for the application in water systems you are always on the safe side. The connector consists of various components, which can be assembled quick and simple without any special tool. The fixed insert pipe ensures an optimal form of the PE Pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. The additional seals ensure total security. The model is available in different versions. Pipe diameter: 63mm - 75mm Thread sizes: 2 1/2" - 3"

Flange connector with loose insert pipe for optimum grip and durability. Our flange connectors are optimal for higher dimensions. They have an additional seal and a loose insert pipe. With our flange connectors for the application in water systems you are always on the safe side. The connector consists of various components, which can be assembled quick and simple without any special tool. The fixed insert pipe ensures an optimal form of the PE Pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. The additional seals ensure total security. The model is available in different versions. Pipe diameter: 63mm - 110mm Thread sizes: 2" - 4"

Flange connector with loose insert pipe for optimum grip and durability. Our flange connectors are optimal for higher dimensions. They have an additional seal and a loose insert pipe. With our flange connectors for the application in water systems you are always on the safe side. The connector consists of various components, which can be assembled quick and simple without any special tool. The fixed insert pipe ensures an optimal form of the PE Pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. The additional seals ensure total security. The model is available in different versions. Pipe diameter: 63mm - 110mm Thread sizes: 1 1/2" - 3"

Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is planned for the installation of water meter systems outside buildings. The box is not only suitable for the house connection, but also for the connection of cemeteries, parks, garden plots, camp sites, green areas or of similar fields. — Modular design — High qualitative components inside — water meter is protected against penetrating water — water meter is installed frost-free — different covers for different load classes — 40% less weight than comparable products The connecting conduits in basic version are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding.

Tapping valve bridge with lateral outflow and integrated stainless steel drill milling cutter Model 762 (for plastic pipes (PE oder PVC) Tapping valve bridge with stop valve and for tapping 1½“. The upper part of the milling valve for tapping is already mounted under pressure - ready for use. The tapping cutter with chambered sleeve prevents the drilling chips from being flushed out. The seal material corresponds to the KTW-recommendations of the Federal Environment Agency (UBA) as well as to the requirements acc. to DVGW W270. Application • for plastic pipes (PE oder PVC) DN 50 - 200 • for water PN 16 until DN 150, for water PN 10 until DN 200

Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is planned for the installation of water meter systems outside buildings. The box is not only suitable for the house connection, but also for the connection of cemeteries, parks, garden plots, camp sites, green areas or of similar fields. — Modular design — High qualitative components inside — water meter is protected against penetrating water — water meter is installed frost-free — different covers for different load classes — 40% less weight than comparable products The connecting conduits in basic version are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding.

Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is planned for the installation of water meter systems outside buildings. The box is not only suitable for the house connection, but also for the connection of cemeteries, parks, garden plots, camp sites, green areas or of similar fields. — Modular design — High qualitative components inside — water meter is protected against penetrating water — water meter is installed frost-free — different covers for different load classes — 40% less weight than comparable products The connecting conduits in basic version are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding.

Valve tapping bridge with service shut-off and for tapping 1 "- 2". Combination rubber insert chambered with several micro-sealing lips. Seal material according to KTW / W 270. Seal the bore with the auxiliary shut-off via the side outlet and seal it after tapping until the valve bonnet is reassembled. For each dimension, a top with matching clamp. scope of application • for plastic pipe (PE or PVC) DN 50 - 200 • for sluice-free, upper tapping under pressure by means of Rehbein auxiliary valve • for water up to PN 16