Paint spraying - Import export

Economic acquisition, powerful performance values and simple handling – these characteristics are combined in a robust metal construction of the air cleaner TAC 1500 S that is suitable for use on construction sites. Its Monoventic regulator enables you to steplessly adjust the air volume precisely to your actual needs, and the flexible filter system allows for the use of variable filter combinations for every construction site situation. With the TAC 1500 S you can reliably filter coarse and fine dust or spray paint mist as well as concrete dust, fine sanding or plaster dust and highly dangerous quartz dusts or asbestos fibres. The filter frame can be flexibly equipped with one or two filter elements, for example a G4 filter or an additional F7 filter, so that in combination with the HEPA filter a two- or three-stage air purification process in accordance with dust class H can be achieved.

-steel construction -spray painted or hot-dip galvanized -Load capacity in kg: 360 -Dimensions (l x w x h) mm: 1020 x 100 x 450

-steel construction -spray painted or hot-dip galvanized -Load capacity (in kg): 300 -Dimensions (l x w x h) in mm: 768 x 200 x 419

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 800 x 360 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 285 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 410 -Retention capacity in l: 440 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 800 x 800 x 455 -Retention capacity in l: 222 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1460 x 1460 x 620 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -with raised platform -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1460 x 1460 x 1083 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -with raised platform -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 2650 x 1460 x 863 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 2650 x 1300 x 435 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-can be towed by a forklift truck or small traction engine etc. -with solid rubber tyres (type STW 100) or with pneumatic tyres (type STW 260) -wheel motion activates spread Accessory -tarpaulin -with lever to adjust spreading width and direction -funnel spray painted RAL 3000

-hydraulic or electric construction -approx. 39 strokes required for hydraulic construction -tilting angle up to 135° -emptying height approx. 1480 mm -2 swivel + 2 fixed polyamide castors Ø 180 mm, both swivel castors with brake -construction height 220 mm -finish spray painted Type available -Type MKS-F, with foot pump -Type MKS-H, with hand pump -Type MKS-12V, electric-hydraulic 12 V (without charger) -Type MKS-230V, electric-hydraulic 230 V

-steel construction -fork sleeves for pick-up -also for straddle stackers secured by chain to prevent slipping -1 rotating hook -spray painted or hot-dip galvanized Types available -Type LA 1600/2400 rigid construction -Type LA 25 rigid construction , inclination 25°, with stirrups 100 mm ground leeway -Type LAT 25 inclination 25°, variable working height, can be fixed in each position, with stirrups 100 mm ground leeway

-Controlled discharge of solids special manually operated scissor lock 300 x 300 mm -frame made of steel tubing -hopper made of steel plating with reinforced edging Types available Type SR -2 swivel + 2 fixed polyamide castors Ø 180 mm, 1 swivel castor with brake, - construction height 220 mm Type SG -fork sleeves inside dimensions (wxh) = 175x65 mm, distance 565 mm -stacking corners Type SRE 2 swivel + 2 fixed polyamide castors Ø 180 mm, 1 swivel castor with brake - construction height 220 mm fork sleeves inside dimensions (wxh) = 175x65 mm, distance 565 mm Types SR-D, SG-D, SRE-D design see above but with slide closure with a special seal on the hopper floor, for manual use, opening 300x300 mm, preferred for fine-grained bulk materials -spray painted or hot-dip galvanized -Volume (approx.) in l: 375 / 600 Accessories -galvanized lid, removable

-perforated intermediate floor 100 mm above the floor, perforation Ø 3 mm, separation 6 mm -1” drain-cock for drainage of liquids -can be emptied at any height by cable operated from the driver’s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -welding, oil- and watertight -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,5 / 0,75 / 1,0 / 1,5 -Load capacity in kg: 750 - 1500

-The stacking tipper made of distortion proof steel sheeting for heavy duty use -can be stacked when full (3 units) -is emptied by cable operated from the driver‘s seat using the traverse -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,55 / 0,7 / 0,9 / 1,5 / 2,0 -Load capacity in kg: 500 - 2000 Accessories -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake -construction height 220 mm (stacking NOT possible) -galvanized 2-part lid, can be opened from one side (stacking NOT possible)

-ideally situated loading centre of gravity -can be emptied at any height by cable operated from the driver‘s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -wheels can be fitted later (up to BK 110) -spray painted our hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,5 / 0,6 / 0,7 / 0,8 / 0,9 / 1,0 / 1,1 / 1,2 / 1,3 / 1,4 / 1,5 / 1,6 / 1,7 / 1,8 /1,9 /2,0 -Load capacity in kg: 750 - 2000 Accessories: -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel with brake ,construction height 220 mm -galvanized lid, can be opened from both sides

-sturdy steel construction with smooth interior walls -trap door operated by cable from the driver’s seat -rubber cushioning to lessen the impact when the trap door is opened -trap door closes automatically when the container is set down on the ground -can be secured to prevent slipping and unintentional trap door operation -suitable for forklift truck and crane -100 mm ground leeway, suitable for pallet truck -with 4 crane eyes Ø 40 mm -can be stacked (3 units) -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,5 / 0,75 / 1,0 / 1,5 / 2,0 -Load capacity in kg: 1000 -2000 kg Accessories -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm -galvanized lid, can be opened from both sides -trap door with galvanized guiding plates

-an ideal dumping angle -can be emptied at any height by cable operated from the driver’s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -wheels can be fitted later -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,5 / 0,75 / 1,0 / 1,5 / 2,0 -Load capacity in kg: 750 - 1500 Accessories -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake, construction height 220 mm -galvanized lid, can be opened from both sides

-sturdy steel construction -ideally situated loading centre of gravity -can be emptied at any height by cable -operated from the driver‘s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -wheels can be fitted later -Surface spray painted or hot-dip galvanized -Volume (approx. in m³): 0,15 / 0,30 / 0,60 / 0,90 / 1,20 / 1,70 / 2,10 -Load capacity: 750 - 1500 kg Accessories: -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake construction height 220 mm -galvanized lid, can be opened from both sides -welding, oil- and watertight -trailer coupling and towing bar

This "stand-alone solution" is designed to meet flexible production requirements and can be used for solvent and water based paints. This spray coating machine is both economical and environmentally friendly. It can optionally be equipped with a belt cleaning system and/or a paper transport belt.This makes it possible to alternate between both modes of operation. A quick change between two paint systems (water/solvent based) is simple and fast. This makes it especially attractive for smaller companies to replace manual painting. Working width: 1,300 mm, Working height: 920-960 mm, Machine dimension: 1,900 mm (length) Feed speed: 2-4 m /min. Exhaust air volume: 7,000 m³/h, Supply voltage: 9.6 kW/ 12 A,

Depending on the workpiece geometry and size, we offer various coating solutions by means of a chain-on-edge system and a round indexing table. To meet individual requirements, either a vertical or a horizontal chain-on-edge system can be used. Spray painting machines for rotating workpieces are distinguished by their high functionality on a smallest possible footprint. In addition, they can be controlled in a circulating or cycled mode, and combined with various conveyor systems and drying methods.

Venjakob has combined – for the first time in the industry – a robot with a surface spray painting machine. VEN SPRAY VARIO offers the flexibility of an industrial spray coating robot and the high output of an automatic surface spray coating machine. The outer edges of the parts are precisely coated by the robot, and the surfaces are sprayed "inline" at a constant throughfeed speed without any stopping or stop and go by the spray guns of the downstream linear axis. In comparison to the usual Cartesian robot systems on the market, this leads to an approx. 50 % higher lacquering performance(surface|minute). In addition, the new system technology optimises the surface quality, as it leads to visibly better results by linking the paint film at transitions from surfaces to outer edges. Another decisive system advantage of the VEN SPRAY VARIO is the ongoing guarantee of reproducible production qualities. The perfect finish of 3D workpieces is particularly impressive. For coating complex 3D parts as a stationary batch we recommend using the optionally available paper belt transport system. In addition to the described flexibility, the plant technology can also be used for surface coating only. As an alternative to a manual spraying station a single robot can be used for complex geometries. The technically sophisticated paint recovery system achieves maximum efficiency. The recyclability of the recovered overspray and the considerably reduced use of cleaning agents provide an impressive energy balance. In addition, the efficient ventilation technology noticeably reduces the resulting energy costs. The modular design ensures a safe investment in the long term. The integration of additional robots and other adjustments to meet the continuously growing demands on our customers' production processes are possible at any time.

With its VEN SPRAY PERFECT Venjakob has the innovative answer to all requirements encountered on the market. Based on decades of know-how in the realisation of high-performance spray painting plants, it is the flexibility of this new generation that convinces. In the long term, the modular system takes into account all production requirements. At the time of machine purchase, its concept realises all variants, from "one off batch size" through to large series production in the high-end range. The modular concept permits implementation of changing framework conditions at any point in time by retrofitting new modules, thereby making your investment future-proof. Working width: 1,300 / 1,600 / 2,200 mm Working height: 940 mm Feed speed: 3-8 m/min Exhaust air volume: 7,000 - 10,000 m³/h Connection value: 20 KW Machine dimensions: 2,280 / 2,800 mm (length of booth) The sophisticated spray gun control minimizes the rate of overspray. With the patented V-belt design up to 98 % of the liquid overspray can be reclaimed. The paint retrieved in this way is recycled into the paint process. Over and above, the innovative ventilation system improves the ecological energy balance. The short setup times, long service life of the filter elements, fast changing times for spray systems and automated paint-change procedures offer a very high degree of efficiency. The twin cleaning units allow the use of solvent-based paints as primer and the direct switchover in split seconds to the second cleaner operating with water-based paints. Maintenance and cleaning operations take place completely separate from the production process.