Results for
KUBOTA BRABENDER TECHNOLOGIE GMBH
Germany
— Compact component operation — Connection via a separate RS485 interface — Maximum 1 component — Operation of CM-E, CB-E — 5,7“ Color-Touch-Display
Request for a quoteKUBOTA BRABENDER TECHNOLOGIE GMBH
Germany
— Connection via the Brabender fieldbus — Host computer interfaces — Operation of CM-E, CB-E, CB-S — A maximum of 16 components — Recipes, diagrams, protocols
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
"Use:Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with Connector Mininiature CMP-XX. Mechanical design: • Aluminium front plate, anodised, protected against corrosion. • Measurement circuit numbering, abrasion- and wipe-proof. • Attachments of stainless steel and nickel-plated brass. • Montageart und Konstruktion verhindern ein Hinein- oder Herausdrücken der montierten Einbau-Kupplungen. • The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition. • Individual built-in couplings can be replaced by loosening only a few screws.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc. Mechanical design: • Aluminium front plate, anodised, protected against corrosion. • Measurement circuit numbering, abrasion- and wipe-proof. • Attachments of stainless steel and nickel-plated brass. • The assembly type and design prevent the fitted built-in couplings from being pushed in or out. • The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition. • Individual built-in couplings can be replaced by loosening only a few screws. • Flat, flush front surface enables easy cleaning. • Standard panels with 1
Request for a quoteTROTEC GMBH
Germany
The B 400 combines great evaporation performance with economical continuous operation in a sturdy housing. Thanks to the permanent rotation, the air is effectively washed and at the same time humidified before being evenly distributed back into the air in the room without condensation, by means of a 2-speed fan. The B 400s quiet-running synchronous motor enables even large rooms to be humidified without running up large electricity bills. B 400 Benefits in practice: Clearly designed operating panel with hygrostat and fan control and level indicators Rotating evaporation fleece cleans and washes the air 2-speed fan Automatic power-off Adjustable vent grid Robust, powder-coated sheet steel construction With built-in brace for optimal air circulation
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TROTEC GMBH
Germany
The TTK 122 E allows for easy transport of bar handles and steering wheels on both sides. The operating comfort is not affected adversely by the solid design. Membrane keys that the operating panel is equipped with is easy to clean and the desired air humidity for example, can be a direct input through the digital display. The selection switches with only one less value are energy saving giving an advantage that is practical in comparison to other dehumidifiers that are analog controlled. The TTK 122 E has a display that can show the dominant air temperature during the function of climate control. It works with full automatic performance as an alternative to the TTK 120 E. For accelerated textile drying it disposes a super-dry functionality. When it comes to wet laundry, carpets, or cloth it is especially practical for faster dehumidifying.
Request for a quoteTROTEC GMBH
Germany
The B250 is a completely electronically controlled disc humidifier that is fitted with an electonic sensor, which permits indicates the level of moisture in the air. Just configure the humidistat to the desired humidity, the one that’s right for you and the application and allow the completely electronic controlled unit do the rest. It is extremely nice to possess something that offers great dependability. The key lock is an extra feature that is purposed to provides added peace of mind. Simply input your exclusive combination to lock the units keypad and avoid unauthorized use, tampering or accidental access that may change the overall settings. Owing to the phrase used in Germany "trust is good, control is better" The B250 has a water level gauge that is located in the operational panel. Furthermore, there is no need stress about the unit going up in smoke of short circuiting.
Request for a quoteVKF RENZEL GMBH
Germany
The air purifier "LR 80 WIFI+" with H14 filter improves the indoor air and can help to reduce the risk of infection by viruses in closed rooms. The air purifier also reduces the concentration of mould spores, house dust, pollen, viruses, bacteria and odours in the air. The unit is equipped with 5 filters: 1. aluminium filter (washable) 2. ionisation filter 20 million ions/m³ 3. antibacterial filter 4. honeycomb activated carbon filter 5. highly efficient Hepa filter H14 with self-sterilising effect Special materials are added to the HEPA filter, which can achieve highly efficient sterilisation and reduce damage to the filter. The noise emission of the air purifier is 20 - 66 dB. Functions: Filter change reminder Parental control PM2.5 display Touchscreen Intelligent sensor system Wifi function Operation, control: control panel buttons + remote control
Request for a quoteELKON GMBH
Germany
ELKON Bag Cement Feeding System consists of cement feeding bunker, intermediary cement feeding screw and control panel. The operator puts the cement bag into the cement feeding hopper and tears it by means of the cutters on the hopper. Then the cement is transferred to the cement silo by cement screw. This system can be used to feed 1 unit of cement silos as well as 2 units of silo by using distribution valve.
Request for a quoteKUBOTA BRABENDER TECHNOLOGIE GMBH
Germany
— Connection via the Brabender fieldbus * Host computer interfaces — A maximum of 6 components — Operation of CM-E, CB-E, CB-S
Request for a quoteBERNSTEIN AG
Germany
The CC-3000 light-duty operating enclosure is particularly suitable for encapsulating operator control panels, industrial computers and display components and, thanks to its modular concept, can be simply adapted to versions tailored to specific customer requirements. — Customised solutions to your specifications — Monitor-based industrial design — Freely selectable width and height (max. 600 x 600 mm) — Depths from 120 mm up to max. 255 mm — High-quality extruded aluminium sections (naturally anodised) — Customised colours from RAL range — Five possible enclosure designs — Optimum heat dissipation due to aluminium sections — Front panels internally-mounted or externally-mounted — Protection class IP65 — Screw-fixed or hinged rear panel — Internal grooves for fixing components — Extensive range of accessories
Request for a quoteBERNSTEIN AG
Germany
The CC-4000 / CC-4000 SL are modular aluminium control enclosure systems. With their outstanding technical features, the enclosures simply and efficiently encapsulate industrial controllers and operator control panels for centralised and decentralised automation in production processes. — Customised solutions to your specifications — Simple and modern industrial design — Freely selectable width and height (max. 800 x 800 mm) — Depths from 52 mm up to max. 646 mm — High-quality extruded aluminium sections (naturally anodised) — Coloured areas that emphasize the design — Optimum heat dissipation due to aluminium sections — Integrated handle elements with vertical section — Protection class IP65 — Front panels internally-mounted or externally-mounted — Internal grooves for fixing components — Product features SL (in addition to CC-4000) - Two enclosure depths (55 und 99 mm) - Slimline design - For encapsulating flat IPCs
Request for a quoteHAVER NIAGARA GMBH
Germany
The disk pelletizers are used for the agglomeration of powdery primary and secondary materials such as filter dust. The primary area of application is the agglomeration of iron ore concentrate to form pellets with a target size of 9 to 16 mm. Inside the inclined cylindrical rotating container, a powdery input material is formed with or without the addition of an evaporated liquid binding agent. By changing the angle of inclination, rotational speed, material conditioning and disk rim height, the optimum operating parameters can be set. Advantages automatic adjustment of the disk rim height automatic inclination adjustment stepless rotational speed setting autogenic wear protection on the bottom of the disk pelletizer (honeycomb bottom) flexible scraper flexible spraying system integrated switch cabinet for easy operation, including control panel You’ll find detailed information in our product brochures and specification sheets.
Request for a quoteResults for
Operator panel - Import exportNumber of results
14 ProductsCompany type