Open frames - Import export

Additional information•Output voltage: 24 V •Protection Class: I •Current: 18750 mA •Spec.0 cover sheet FW-Type: OF450-24 •Input voltage: 100-240 V •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Input tolerance: +10% / -10% •Storage temperature : -40°C - 70°C •Input current: 5500 mA •Working temperature: 0°C - 70°C •Humidity: 5% to 95% •Frequency: 50 / 60 Hz •AC Input: Screw Terminal •DC output: Screw Terminal •Family : OF450 •Output voltage tolerance: +2% / -2% •Means of Protection: Input Output 2xMOPP, Input - Ground 1xMOPP •Output voltage 2: 5 V •current 2: 100 mA •Standard: IEC60601-1, IEC62368-1

With the LED WindSign "Seal Lite" you will attract the attention of customers and your advertising message, especially in dark weather. The powerful battery has a runtime of 16 hours in ecomode. At 100%, a running time of 8 hours is achieved. The pavement display is designed for permanent outdoor use. It is equipped with a fillable plastic base and can be used in highly frequented areas, such as pedestrian zones or walkways. Due to a special spring technology, it is perfectly suited for use in windy locations. The poster can be changed using the folding technology built into the frame. By simply opening the profiles, the protective foil is removed and the insert is exchanged. Thanks to the wheels integrated in the base, the LED WindSign "Seal Lite" can be moved flexibly and moved to the desired location.

Use the double-sided illuminated frame "Simple" to light-up two posters. The double-sided "Simple" illuminated frame is supplied with power via a 3.5 metre long cable. The frame is switched on and off via the power supply unit. Hang your impressive backlit advertising in portrait or landscape format from the ceiling. The supplied wire suspension helps you to do this. A PET film protects your print insert from environmental influences. A simple media change is possible by loosening the silver clamping profiles. Simply open the frame profiles and quickly deliver a new advertising message. You present advertising posters in the right light. The LED light frame "Simple" can be used in a wide range of applications. The illuminated frame makes your pictures shine, especially in low-lit salesrooms, airport terminals and shopping centres.

The pavement WindSign "QS I" was technically updated and is now available as pavement WindSign "Seal". The stronger cover foil is fixed with screws on the top profile and cannot slip down anymore. The covers can still be exchanged if necessary. Two sticky pads are implemented in the upper part of the frame. Those make sure that your posters will be held in place during installation. Of course the pads are reusable. The optimised poster stand comes in new visual appearance. All pavement signs are made with a sturdy back-wall and 2 non-glare, UV stabilised front covers. The new sealant makes the display waterproof. The base can be filled with either water or sand and is movable on 2 wheels when tilted. The strong springs allow for the highest grade of stability even in “stormy” weather conditions. Posters can be exchanged quickly by opening the aluminium click frame profiles. The header board is inserted into the upper groove of the pavement sign and fixed with screws.

The uniform, high-quality appearance of this triangular stand is ensured by the silver anodised click frames and the silver anodised aluminium round tubes. The simple assembly is done by screwing the 3 click frames to the 3 stable ø 60 mm aluminium legs. In order to effectively protect the inserted posters from rainwater, a circumferential sealing rubber is mounted on the weather-resistant metal rear walls, in addition the cover foil is glued to the rear wall on a short side. The cover foils used are made of non-reflecting, UV-stabilised material to prevent the posters from fading. Furthermore, the anti-reflection coating of the films ensures that the inserts are much easier to read even in sunlight. The posters can be changed quickly by opening the click frame profiles at the front. The highlight of this display is that the complete rear wall with foil can be removed for even easier poster changing.

Additional information•current 2: 5000 mA •Output voltage 2: 5 V •Means of Protection: Input Output 2xMOPP, Input - Ground 1xMOPP •Output voltage tolerance: +2% / -2% •Family : OF250 •AC Input: flat pin connector •Frequency: 50 / 60 Hz •Standard: IEC60601-1, EN61558 •Unit: OF •Humidity: 5% to 95% •Working temperature: 0°C - 60°C •Storage temperature : -40°C - 70°C •Input tolerance: +10% / -10% •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Input voltage: 100-240 V •Spec.0 cover sheet FW-Type: OF250-24 •DC output: flat pin connector •Current: 10500 mA •Protection Class: II •Output voltage: 24 V