Monitoring - Import export

The new UBX flow monitor is designed with all components so that it simply runs smoothly even under harsh climatic conditions. You can count on it.

Blockage monitoring detecting partial blockage, for particulate material e.g. seed, fertilizer for seed drills and applicators

Desk mount with two flexible monitor arms. Individual adjustment of height, tilt and orientation of the screen. • Monitor mount with flexible arms for 2 screens including individual mounting option by bolt-through fixing and table clamp • Height, tilt and position of the monitor can be adjusted easily and individually to facilitate ergonomic working • Can be rotated 90° for working in portrait or landscape mode • Effortless positioning of the arms in the requested position due to individual adjustment of the spring • Universal VESA mount (75 x 75 mm or 100 x 100 mm) • For standard monitors up to 32” and 8 kg • Cable management: The monitor cable is guided along the monitor mount by internal cable channels and a clamp, thus protecting against cable breakage

Table column for two monitors with adjustable height, rotation and tilt of the screens. • Monitor mount for 2 screens including individual mounting option by bolt-through fixing and table clamp • Height, tilt and position of the monitor can be adjusted easily and individually to facilitate ergonomic working • Can be rotated 360° for working in portrait or landscape mode • The arms can be flexibly extended to 36 cm by three joints and swiveled up to 180 ° • Stepless height adjustment of the screens on a 45 cm high column • Universal VESA mount (75 x 75 mm or 100 x 100 mm) • For standard monitors up to 27“ and up to 8 kg • Cable management: The monitor cable is guided along the monitor mount by clamps, thus protecting against cable breakage

Efficiency through ergonomics: monitor holder for wall and desk Whether for one or several monitors: monitor arms today make an important contribution to an ergonomic workplace. A special feature of DURABLE holders: Smart functions down to the last detail with easy mounting and handling. Variable mountings and height-adjustable monitor holders allow maximum adaptation to individual needs: Thus, the monitor holders for the desk offer different solutions depending on the number of screens and the table mounting. The elegant design of the monitor mounts blends into any working environment and also enhances the workplace. Helpful tips and information for using monitor holders: Quality made in Germany and innovative features: find out more about DURABLE monitor holders. Clean Desk - Increase efficiency with a tidy workplace Optimum ergonomic conditions for healthy work

Dual monitor mount height, rotation and tilt-adjustable. Attaches via a desk clamp. • Monitor mount with desk clamp for 2 screens • Height, tilt and position of the monitor can be adjusted easily and individually to facilitate ergonomic working • Can be rotated 360° for working in portrait or landscape mode • Integrated safety system protects from injury from moving components • Tidy cable management thanks to five individually attachable cable clips (included) • Monitors can be moved and fixed freely along the length of the cross beam • Easy assembly, tools included • Universal VESA mount (75 x 75 mm or 100 x 100 mm) • For standard or curved monitors from 21″ to 27″ (53.34 cm to 68.58 cm) weighing 3 to 8 kg • Desk clamp for desk thicknesses from 14–44 mm • 10-year warranty • Made in Germany • High-quality materials for a long lifespan: Aluminium and premium plastic • Environmentally friendly in accordance with ISO 14021

3-way ergonomically height-adjustable stand for monitors and laptops made from 60% recycled PET felt. • 3-way ergonomically height-adjustable stand for monitors and laptops made from 60% recycled PET felt • Clean Desk: Can be optionally extended with a drawer, which creates additional storage space and a tidy work surface • The high stability ensures safe working • Integrated cable outlets ensure tidy cable management • Thanks to its material, the product fits harmoniously into any environment and creates a cosy atmosphere • Sustainable packaging: designed to conserve resources and free from plastics

The IMX12-CCM (Cabinet Condition Monitoring) can be installed in virtually any cabinet or any protective enclosure to ontinuously check the current protection degree there - even retrospectively. The DIN rail device notifies with a switching signal improperly closed doors, as well as exceedances of temperature and interior humidity, to the control system.

Interactive multi-touch monitor for use in the classroom, meeting room, public facilities, retail, and wherever a large-format touch monitor is required. The Android-based displays are made of anti-glare tempered glass, are suitable for everyday use and have up to 20 touch points. The professional monitors from Philips are specially optimised for Android apps. Activate the built-in whiteboard mode to turn the display into a blank canvas that can be drawn on by multiple users by hand or with special markers. Displayed content can be captured for quick printing or file sharing. Alternatively, four different areas can be displayed on the screen. Up to 32 devices can be connected simultaneously in the existing WLAN network and switch between contents as required. A direct connection with a dongle is also possible as an option.

System for spray quality monitoring a multitude of spray nozzles e.g. for agricultural sprayers

Radar Sensor measuring Spray quality signature for industrial applications

Radar material flow sensor for pipes and hoses

Novelis offers industrial aluminum coils and sheet in alloys for the main board and back cover of LED TVs and LCD monitors. Leading LED TV manufacturers, including Samsung and LG, call upon Novelis to supply critical parts such as back panel, bottom chassis, bezel and stand structures for some of the largest, most brilliant displays on the market today.

Monitor mounting compact The monitor mounting in the "compact" version is new to the program and will be available from the end of April 2018 Feature: short design fixing principle with half shells (suitable for retrofitting and extensions) reducing bushes availableh (round or square 20, 25, 30mm)

Ball joint monitor mounting Even more degrees of freedom through a ball joint socket Feature: max. load capacity 10 kg (static) 60° free swivelling reducing bushes available (round 20 and 25mm, square 20mm)

Basic version for easy connection of display devices Feature: max. load capacity 25 kg (static) can be turned through 90° reducing bushes available (round 20 and 25mm, square 20mm)

Processes such as radial riveting or pressing are used to permanently conjoin a metal plate for example with a wire bracket. 
Test apparatus for monitoring compliance with the required tear values secure the process in line with these safety-relevant components. These assembly parts are used, for example, as reinforcements for backrest frames.

IRwin® Methane Leak Detector is an innovative, portable natural gas detector for easy gas pipe survey and gas leak detection. It is developed in accordance with many national directives, such as the DVGW (Deutscher Verband des Gas- und Wasserfaches) directive. The IRwin SX-models are certified for use in Zone 0, classification Ex II 1G, Ex ia IIC T3 Ga. The integrated proprietary infrared sensor system (patents pending) has a fast reaction and short recovery time. The system prevents false leak alarms and ensures correct and fast leak evaluation. The specially developed Gas Chromatograph (GC) and IR-sensor combination allows fast distinction between marsh gas and natural gas from all known natural gas sources. The IRwin GC gives fast test results, even at low ethane concentrations, from 1000 ppm methane leaks. IRwin is able to measure methane according to the traditional operating modes required by DVGW G 465-4, such as "Inspection above-ground" and "Measuring bar holes". The...

Clean water is essential for life. As more chemicals are introduced to the environment, adverse consequences to water quality and corresponding health impacts will increase as well. In order to provide the highest level of safety and security, a fast response to water quality issues is necessary. The CMS5000 is a GC-based system that autonomously samples VOCs in water, quantifies contaminant levels and automatically alerts users if thresholds are exceeded.

The Only Person-Portable GC/MS That Identifies VOCs and SVOCs Quick, Easy, Accurate On-Site Performance HAPSITE ER is the only person-portable Gas Chromatograph/Mass Spectrometer (GC/MS) that requires minimal training to deliver qualitative and quantitative lab-quality results-in the field, in less than 10 minutes. In fact, all the operator has to do is push a button to begin identifying and quantifying volatile organic compounds (VOCs), toxic industrial chemicals (TICs), toxic industrial materials (TIMs), chemical warfare agents (CWAs), and select semi-volatile organic compounds (SVOCs). HAPSITE ER has the capability to identify analytes in the PPM (parts per million) - PPT (parts per trillion) range. The GC column provides sharp chromatography and excellent resolution. During the quantitation method, the front panel clearly displays what chemicals are present, their concentration, and access to information regarding the degree of danger - to help make quick decisions...

With the new height-adjustable monitor floor stand, RK Rose+Krieger is expanding its "RK monitor holder" product range to include a robust, ergonomic standing workstation for industry. The work surface and monitor mounting are supported by a stable triple column system and can be adjusted conveniently by hand to the size of the respective user. The three elegant, slim anodised aluminium columns stand on a black, powder-coated base frame which provides space for an industrial PC and accessories. Cables are elegantly routed in the integrated cable duct on the rear column. The light grey coated work surface (0.3 m2) can be adjusted by hand easily thanks to the tieback support. A spring-loaded locking bolt provides reliable latching. The height adjustment stroke is 400 millimetres. This way the workstation can be adjusted individually to the body size of the user. In addition, the height of the monitor can be adjusted separately and thus guarantees optimum workstation ergonomics.

VESA or universal mount for connecting monitors, displays or control panels Monitors, touch screens, displays and control panels are used every day, and not just in the office. Industrial machines and systems are programmed or performance data displayed on modern touch screens or control panels. In utility vehicles, camera monitoring systems facilitate resetting and navigation devices make positioning possible. On conveyors, monitors make it possible to monitor and visualise all sorts of processes. Today, control panels or flat screens are often an essential component of modern assembly workstations, too.

Monitor swivel arms for ergonomic workstation design The monitor mountings from RK Rose+Krieger allow for an optimal view of the monitor or a control panel. The range of action can be increased even further by using a swivel arm. This may be useful for carrying out set-up work on machinery for example, or if the monitor is having a disruptive impact on the working environment. There is also the option of expanding the support arm with two support tubes (twin version) to include a sturdy keyboard tray. The modular design of the RK swivel arm/support arm system allows for varied combination options and helps to adapt workstations to the most ergonomic arrangement.

Height adjustable monitor support arms – easy manual height adjustment and positioning The twin and telescopic support arms are now both available in a height adjustable version. Mounted on a vertical holder, the support arms can be manually adjusted over a range of 400 mm. By simply pulling out and holding the fixing bolt, the support arm can be freely moved to the required height. On release, the fixing bolt then locks the support arm in the selected position. The height adjustment feature is particularly useful for ergonomic workstations.

Monitor swivel arms for ergonomic workstation design The monitor mountings from RK Rose+Krieger allow for an optimal view of the monitor or a control panel. The range of action can be increased even further by using a swivel arm. This may be useful for carrying out set-up work on machinery for example, or if the monitor is having a disruptive impact on the working environment. There is also the option of expanding the support arm with two support tubes (twin version) to include a sturdy keyboard tray. The modular design of the RK swivel arm/support arm system allows for varied combination options and helps to adapt workstations to the most ergonomic arrangement. Different support arms, swivel arms and telescopic support arms are available, based on the load to be supported (monitor weight, torque support). The basic version has one support tube for loads of up to 10 kg , and the twin version has two support tubes for loads of up to 25 kg.

Overpressure and vacuum possible - Different pressure and flow ranges possible - Several measuring ranges possible in one device - Modern operation via 5" touch graphic colour display - Completely remote controllable, optionally via ProfiNet

We are your reliable partner for the realisation of your products - from the initial idea to series production and beyond. Our goal is to offer you a comprehensive full service and to manufacture your products economically and in the highest quality. We support you in the consultative development of your early concepts and prepare an initial cost estimate in the concept phase. In addition, we accompany you during series and mass production with our long-standing manufacturing partners in the Far East and ensure reliable logistical handling.

The LPM-II-plus Particle Monitor determines the contamination level of the measured fluid on eight size channels and offers precise and complete determination of particle sizes in accordance with international standards. The LPM-II-plus is an automatic, optical particle counter with high-performance LEDs that work on the light obscuration principle. STAUFF recommends recalibrating the measuring equipment at regular intervals. LPM-II-plus-D ▪ with display and keypad LPM-II-plus-O ▪ without display and keypad LPM-II-...-CX ▪ ATEX compliant (Zone 2 / Category 3G)

Examinations in an optimally ergonomic, fatigue-free sitting position, facilitating the physician‘s work High resolution images and videos in full HD quality Swivelling 21.5“ monitor attached to a flexible adjustable arm for a large-scale image display and an exact rendering of the examination field Integrated powerful examination light Green light and electronic green colour filter for a better visualization of tissues in Pap smears Autofocus and manual focus, Up to 36.5x continuous optical magnification (=42x optical zoom) + 2 freely definable zoom values can be easily accessed at the touch of a button Quick and easy documentation of the examination findings by the Image/Video Save Button Pre-installed SCHMITZ software with pen and comment function for annotating images, archiving of images and videos via LAN connection or USB port (optional integration via DICOM, GDT or HL7 interface possible) Free swivelling allows storing the colposcope in a space-saving parking position