Metallization - Import export

Metal umbrella stand with perforation. Capacity: 28.5 litres. • Metal umbrella stand with epoxy resin coating • With decorative perforated strip • Ideal for entrance areas, offices, shops or the home • Capacity: 28.5 litres

Lockable metal wall ashtray. Easy to attach and empty. Capacity: 4 litres. • Metal wall ashtray with epoxy resin coating • With removable inner container • Lockable container (including 2 keys) • Easy to empty and clean • Ideal solution for safe, efficient disposal of cigarette waste • Suitable for use in roofed outdoor areas • Easy wall-mounting • Capacity: 4 litres

Bookends, closed model. Made of 1 mm thick, epoxied, powder-coated steel. • Robust bookends made from powder-coated sheet steel

Wall distributor 5723E with 5 slots, splash-proof. Protection class IP 44 (electrical units). The housing is made of sendzimir galvanized sheet steel. The frame and the door are made of stainless steel and the device carrier is made of aluminum. The door closes even when standard plugs are inserted and can be locked with a profile half-cylinder lock. The flush-mounted wall distributor 5723E is suitable for indoor and outdoor use. The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Craemer is a specialist for constructing and manufacturing complex metal components and a well-known international supplier for the automotive, commercial vehicle, large domestic appliance and heating industries. The sheet metal components are sold to leading car producers, such as BMW, Mercedes Benz, GM, Volkswagen and Audi. Miele and other world brands are being supplied with white goods. The Craemer Group is one of the leading European manufacturers in the high volume serial production of car-modules, particularly components for seating structure and seatbelts. We process: sheet steel, high-strength sheet steel, high-grade steel and aluminium sheet Manufacturing process: hydraulic and mechanical presses with progressive die, transfer and servo direct technology as well as modern facilities for assembly production. Press capacity of between 3,150 and 25,000 kilonewton at a maximum table-length of 8,000 millimeters

This part is use for printer accessories,after CNC Milling,processing black anodize.

Brass float valves of open design in 3 and 4 inches can be combined with our hollow float balls made of high-quality PE-HD plastic (max. 70 °C), alternatively also with copper or stainless steel balls. The chemical nickel plating provides corrosion protection.

The AZOR PROFI filling valve is used when the max. line pressure of 10 bar is not high enough, as it is designed for a max. pressure of 14 bar. It is also a bit more compact than the EURO filling valve.

Our competences ,Flexible and toolbased sheet metal processing ,2D laser cutting, punched and folded parts. ,Bent wire parts madetomeasure ,Manual and automated welding. We would be happy to manufacture your preliminary products. More information available at https//www.geck.de

We process the following materials: ■ chrome-nickel steel ■ various types of steel ■ non-ferrous metals ■ various aluminium alloys steel processing, stainless steel, machine engineering, tool engineering, metal processing, sheet steel processing, material 16 Mo3, Hardox, 1.4301, 1.4571, 1.4404, S355, S235, metal products, steel products, supplier construction machinery, power station, energy station, offshore equipment, pipes, steel halls, metal construction, profiles, handrails, balconies, stairs, roofing, pallet warehouse, pallet inverters, scrap conveyors, transport racks, special frames, devices, die blocks, barrel press, fork shoes, fork extensions, industrial gates, fences, customized constructions, industrial service, furnaces, playgrounds, sports fields, cladding, casing, housing, covers, noise-protection cabins, machine frames, large milled parts, conveyor technology, conveyor line, plunge pools, tank barrels and much more

PEKI float valve series made of high quality hot pressed parts and precision turned parts, assembled with modern injection moulded parts and sealing elements made in Germany . Compact design with high filling capacity manufactured in brass, chem nickel-plated and stainless steel.

The AZOR PLUS delayed refill valve (it starts after the flush valve is in the closed position) . Highest proven water savings. It also complies with the DVGW standard and is designed for up to 14 bar line pressure.

The X2000NC is a modular, fully servo-electric wire and tube bending machine that can be configured to customer specifications with various servo-electric units such as NC finger benders, bending slides and presses up to a force of 7000kN. Due to the variable positioning possibilities of the units, a great variety of different forming processes can be realized on the machine. This makes it possible to produce a wide variety of wire, tube and strip products on one X2000NC. Dimensions: from app. 5,50m x 2,50m, app 10 - 30 to.

Wall distributor 5722E with 4 slots, splash-proof. Protection class IP 44 (electrical units). The housing is made of Sendzimir galvanized sheet steel. The frame and the door are made of stainless steel and the device carrier is made of aluminum. The door closes even when standard plugs are inserted and can be locked with a profile half-cylinder lock. The 5722E flush-mounted wall distributor is suitable for indoor and outdoor use. The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

The thin coating provides an antislip protection of the load when used in both wet and dry areas. At the same time, the surface protects against damage and scratches to delicate surfaces.

For the majority of the resistor units manufactured by Schniewindt, the design is based on CSN® Resistor Webs. For manufacturing the resistor webs, resistive wires are woven meander shaped into temperature resistant insulation yarn. Besides the excellent high voltage strength and the typedependent low inductivity of the resistor webs, these webs are additionally suitable for high specific load operation due to the excellent convection conditions of the resistor web design. By selecting special high grade resistive alloys for manufacturing of the resistor webs, resistor units for operation under almost any environmental condition can be developed

X2000NC for producing door strikers Modular tool set on an X2000NC line for the production of door strikers from 8 mm wire. Striker sprinter tool, 3 stations, 2 m back wall, feeding of coil material via NC roller infeed, cycle output: approx. 60 pcs/min, ready-to-use, weight approx. 10 t Door striker production With these specifications, our X2000NC is the world’s fastest system for the production of door strikers for the automotive industry. With tool changes, different striker shapes can be achieved, as well as processing details such as upsetting or tapering at wire ends. Our one-of-a-kind production model enables cycle times of more than 60 pcs/minute. For this reason, we’d prefer not to share the technical details of our strategy online. If you’re interested, please arrange a meeting with a member of our field sales team. Incidentally, we also build assembly systems for coupling door strikers to striker plates.

Servo-electric press lines Modular X2000NC setup as a press line with various servo-driven presses for cold forming Back wall dimensions: approx. 5 x 3.5 m, total weight: approx. 45 t Tool setup: 6 stations, 23 mm wire fed in from decoiler and feeder, straightener and cutting unit, ready-to-use production parts Cold extrusion process with press lines Illustrative example of a modular X2000NC setup with servo-driven presses of various sizes as a press line for the cold forming of wire. This setup with servo-driven presses from 240 kN to 7,000 kN can take the place of a single large press with a progressive die. Our press line with synchronised servo transfer is compact, fast and affordable. Unlike large presses from other manufacturers, our line does not need its own press pit. If you need a machine for processing thick wire up to 26 mm in diameter – we’re the specialists to call.

A clamping ring machine is a system for the automatic production of clamping rings. Schmale Maschinenbau Gmbh is one of the leading manufacturers of clamping ring machines in Europe. On our clamping ring machines, the strip material is profiled, bent and cut. Automatically closures are supplied and welded. The finished clamping ring is calibrated and stored. Via a servo-electric transfer, all processing stations are connected to each other and operated simultaneously. Thus, cycle rates of up to 28 clamping rings per minute can be realized.

Wire forms can have a shape that is limited almost only by fantasy. Many of them have some kind of spring functionality, for example some quick fastening applications. In most products, the material is stressed in bending and they can be looked upon as leaf springs made from wire. Wire forms are manufactur

Many applications require two similar springs, but with one right-hand coiled and one left-hand coiled. In some cases, these two springs can be combined into a double spring, which has one right and one left-hand coiled spring body connected to each other.

A snap or retaining ring is a fastener or retaining ring that consists of a semi-flexible metal ring with open ends that can be snapped into place. It fits in a groove on a shaft or inside a bore and locates the shaft axially in one direction.

Disc springs (also called Belleville springs) are geometrically a cylindrical washer with a slightly conical shape. It is used as compression spring and is the best solution when forces are high and travel relatively limited. This type of springs can or in parallel, which increases travel and/or force.

Stampings (and stamped parts) are versatile and you find them in a wide range of applications for many different industries. Lesjöfors delivers stamped parts from our standard program as well as customized solutions.

Flat springs are parts made of strip material where the material is stressed in the bending process and the relation between deflection and force is a vital part of the function. Their design can be varied extensively to fulfill both load-deflection and assembly requirements.

We manufacture bushings using either bending technology or stamping technology. This production type provides a cost-effective alternative to other time- and material-consuming manufacturing processes.

Wave Washers are washers with a wave form and gives an axial force when the waves are flattened out during compression. The function is similar to wave springs, but wave washers have only one coil

Stainless steel gas springs function the same as their common hydraulic counterparts, but give an alternative when operating under rough conditions such as off-shore and other outdoor exposure applications. Other commons application areas for stainless steel gas spring include health care products, food industry and medical devices.