Results for
WALTER STAUFFENBERG GMBH & CO. KG
Germany
▪ Analogue version ▪ 5-pin connection ▪ Can be used with all analogue Hydraulic Testers of the PPC series ▪ Input voltage: 7 ... 12 V DC ▪ Output signal: 0 ... 3 V DC ▪ CAN version ▪ Indication of the sensor status via LED ▪ 5-pin SPEEDCON connection plug ▪ CANopen protocol profile DS406 v3.2 with manufacturer-specific additions ▪ LSS service DS305 v2.0 ▪ Sturdy Stainless Steel housing (1.4301) ▪ FPM (Viton®) gasket ▪ Weight: 200 g / .44 lbs ▪ Suitable for gases and liquids (in the case of aggressive media, only after consultation) ▪ Accuracy (±0,25% FS* typ.) ▪ Automatic sensor recognition ▪ Pressure connection G1/2 (without adaptor) ▪ Calibration certificate on request Ambient Conditions ▪ Media temperature: -25 °C ... +105 °C /-13 °F ... +221 °F ▪ Ambient temperature: -25 °C ... +85 °C / -13 °F ... +185 °F ▪ Storage temperature: -25 °C ... +85 °C / -13 °F ... +185 °F ▪ Compensated range: 0 °C ... +85 °C / +32 °F ... +285 °F ▪ Load cycles (10 6): 100 Electrical Data ▪ Response...
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
▪ Analogue version ▪ 5-pin connection ▪ Can be used with all analogue Hydraulic Testers of the PPC series ▪ Input voltage: 9 ... 36 V DC ▪ Output signal: 0 ... 3 V DC ▪ CAN version ▪ Indication of the sensor status via LED ▪ 5-pin SPEEDCON connection plug ▪ CANopen protocol profile DS406 v3.2 with manufacturer-specific additions ▪ LSS service DS305 v2.0 ▪ Sturdy Stainless Steel housing (1.4301) ▪ FPM (Viton®) gasket ▪ Weight: 85 g / .19 lbs ▪ Suitable for gases and liquids (in the case of aggressive media, only after consultation) ▪ Accuracy (±0,25% FS* typ.) ▪ Automatic sensor recognition ▪ Process Connection G1/4 (without adaptor) ▪ Calibration certificate on request Ambient Conditions ▪ Media temperature: -25 °C ... +105 °C /-13 °F ... +221 °F ▪ Ambient temperature: -25 °C ... +85 °C / -13 °F ... +185 °F ▪ Storage temperature: -25 °C ... +85 °C / -13 °F ... +185 °F ▪ Load cycles (10 6): 100 Electrical Data ▪ Response time: 1 ms ▪ Long-term stability: < 0,2 % FS* /a ▪ Vibration...
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Test Couplings with ball check for normal hydraulic applications and hydraulic applications with high-viscosity fluids. Area of Application ▪ Monitoring and control of pressure ▪ Venting ▪ Sampling in high- and low-pressure systems Advantages ▪ Coupling at system pressure level ▪ Leakproof connection before ball check is open ▪ Simple connection to measuring, control and switching devices Media ▪ Suitable for hydraulic oils and other mineral oil based fluids (Check compatibility of sealing material) ▪ For use in conjunction with other liquid media please consult STAUFF Working Pressure ▪ Max. working pressure 400 bar / 5801 PSI For SMK style G and K the recommended working pressure of fitting manufacturer has to be applied. Materials Metal parts made of: ▪ Steel, zinc/nickel-plated = C6F (CrVI-free) Ball made of Stainless Steel Sealings made of: ▪ P = NBR (Buna-N®) Temperature range -20 °C ... +100 °C / -4 °F ... +212 °F ▪ V = FPM (Viton®) Temperature range -20 °C ... +200 °C...
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Test Couplings with piston valve for: ▪ Hydraulic applications with low-viscosity fluids (e.g. water, cooling lubricants, etc.) ▪ For high, pulsating pressures ▪ For customer philosophy “Soft sealing / non metal to metal seal” ▪ Pneumatic applications ▪ Filling (flow in opposite direction) SKK-FÜLL Area of Application ▪ Monitoring and control of pressure ▪ Venting ▪ Sampling in high- and low-pressure systems ▪ Filling of accumulators (special filling-version) Advantages ▪ Coupling at system pressure level ▪ Leakproof connection before ball valve is open ▪ Simple connection to measuring, control and switching devices ▪ Self locking metal guard cap Media ▪ Suitable for hydraulic oils and other mineral oil based fluids (Please pay attention to the sealing materials used) ▪ For use in conjunction with other liquid or gaseous media please consult STAUFF ▪ In case of ultimate tightness requirements for gaseous media, a special Gas-type is available Working Pressure ▪ Max. working...
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Test Couplings with ball check for normal hydraulic applications and hydraulic applications with high-viscosity fluids. Area of Application ▪ Monitoring and control of pressure ▪ Venting ▪ Sampling in high- and low-pressure systems Advantages ▪ Coupling at system pressure level ▪ Leakproof connection before ball check is open ▪ Simple connection to measuring, control and switching devices ▪ Self locking metal guard cap Media ▪ Suitable for hydraulic oils and other mineral oil based fluids (Check compatibility of seal material) ▪ For use in conjunction with other liquid media please consult STAUFF Working Pressure ▪ Max. working pressure 630 bar / 9137 PSI For SMK style G and K the recommended working pressure of fitting manufacturer has to be applied. ▪ Joining under pressure up to 630 bar / 9137 PSI max. Materials Metal parts made of: ▪ Steel, black zinc/nickel-plated = C6F* (CrVI-free) Optional: ▪ Stainless Steel V2A (1.4305 / AISI 303) on request ▪ Stainless Steel V4A...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
WALTER STAUFFENBERG GMBH & CO. KG
Germany
Test Couplings with ball check for normal hydraulic applications and hydraulic applications with high-viscosity fluids. Area of Application ▪ Monitoring and control of pressure ▪ Venting ▪ Sampling in high- and low-pressure systems Advantages ▪ Coupling at system pressure level ▪ Leakproof connection before ball valve is open ▪ Simple connection to measuring, control and switching devices ▪ Self locking metal guard cap Media ▪ Suitable for hydraulic oils and other mineral oil based fluids (Check compatibility of sealing material) ▪ For use in conjunction with other liquid or gaseous media please consult STAUFF ▪ In case of ultimate tightness requirements for gaseous media, a special Gas-type is available Working Pressure ▪ Max. working pressure 630 bar / 9137 PSI For SMK style G and K the recommended working pressure of fitting manufacturer has to be applied. ▪ Joining under pressure up to 400 bar / 5801 PSI max. Materials Metal parts made of: ▪ Steel, zinc/nickel-plated = C6F...
Request for a quoteResults for
Media consultancy - Import exportNumber of results
7 ProductsCompany type
Category