Lighting effects - Import export

With the DIMMbox, FRIWO offers a technically sophisticated solution for dimming LED lighting. Different versions of the DIMMbox enable dimming per DALI, Push-Dim or 1 - 10 V. The dimming function is achieved by pulse width modulation control (PWM) with a switching frequency of 600 Hz. There are no flicker effects due to the chosen frequency. The DIMMbox works with a voltage range from 15 to 50 VDC and a current of 5 A at input and output. The device can be operated in constant voltage- or constant current mode in connection with FRIWO LED drivers. Furthermore, the DIMMbox is connectable to all third party drivers in constant voltage mode. With a length of 153 mm and a minimum cross section of 21 x 30 mm, the DIMMbox can be used for smallest profiles. The DIMMbox is approved for Europe and complies with the low voltage directives EN61347-1, EN61347-2-11 and EN60065 as well as with the EMC directives EN55015, EN55022 and EN61547.

•IP rating: IP67 •Output voltage tolerance: +2% / -2% •Frequency: 50 / 60 Hz •AC Input: connecting bracket 0,5...1,5 mm² •Humidity: 10%- 95% •Working temperature: -20°C - 45°C •Storage temperature : -40°C - 70°C •Standard 1: EN61347-2-13 •Standard: IEC61347-1 •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Unit: LED •DC output: connecting bracket 0,5...1,5 mm² •Input current: 180 mA •Input tolerance: +10% / -10% •Input voltage: 220-240 V •Spec.0 cover sheet FW-Type: LT40-24/1400 WP •Protection Class: II •color: White

•Output voltage tolerance: +2% / -2% •Frequency: 50 / 60 Hz •AC Input: connecting bracket 0,5...1,5 mm² •Humidity: 10%- 95% •Working temperature: -20°C - 45°C •Standard 2: EN61347-2-13 •Standard 1: EN61437-1 •Storage temperature: -40°C - 70°C •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, mbient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Unit: LED •Input current: 180 mA •DC output: connecting bracket 0,5...1,5 mm² •Input tolerance: +10% / -10% •Input voltage: 220-240 V •Spec.0 cover sheet FW-Type: LT40-24/1400 1-10V •Protection Class: II •color: White •Country version: EU

For inexpensive dimming of light bands or multiple lights respectively with the same dimming level in cc-mode Central switching unit for all FRIWO drivers of the LT series with 1 - 10 V input Control range: 10 - 100 % and Off 0 % Dimming per 1 - 10 V Output voltage of 13 V @ 100 mA to supply an external sensor Additional PWM input to regulate the output voltage (TTL level 0 V - 5,5 V/frequency 1 kHz) IP20 Compact design Life cycle: 30,000 hrs at 45°C ambient temperature Number of connected LED drivers: 100 (max. lowerable current 100 mA).

•Frequency: 50 / 60 Hz •AC Input: connecting bracket 0,5...1,5 mm² •Humidity: 10%- 95% •Working temperature: 0°C - 45°C •Standard 2: EN61347-2-13 •Storage temperature: -40°C - 70°C •Standard 1: EN61437-1 •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Unit: LED •Input current: 300 mA •DC output: connecting bracket 0,5...1,5 mm² •Output voltage tolerance: +2% / -2% •Input tolerance: +10% / -10% •Input voltage: 220-240 V •Spec.0 cover sheet FW-Type: LT60 •Protection Class: II •color: White •Country version: EU

Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/light New E4/light version with the proved and tested "tongue and groove" system of the Series E4/4 Low weight Optimized interior-exterior dimensions ratio Cost efficient Manifold interior separation potentials Large accessory kits Thin external links Max. travel distance: 150 - 400 m Typical industrial sectors and applications Machine tools (closed E4/light tubes and open E-Chain®) Material processing Stone cutting machines Woodworking machines General mechanical engineering Vehicles Construction machinery Limited application of long travels Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness

Show what your logo is worth to you and stand out! The doming signs are self-adhesive and are produced in various printing processes. You get three-dimensionality through a plastic cover. Every logo becomes a memorable focus. The advantages at a glance: self-adhesive UV and weather resistant water and abrasion resistant temperature resistant permanently elastic high quality appearance exclusive and permanent product refinement The interplay of light and shadow creates an effect that makes the colors appear brilliant