Results for
ABS SAFETY GMBH
Germany
Equip your ladder with this temporary stainless steel securing device. This ladder safety solution prevents your ladder from tipping and slipping. It is simply clamped between 2 ladder rungs (at least 250 mm wide) using a stainless steel spring mechanism. Temporary ladder securing device Suitable for use with all standard ladders Prevents slipping and tipping Simply clamp it between 2 rungs Designed for rungs at least 250 mm wide
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel vertical lifeline system is designed for permanently-installed, standard ladders made of steel or aluminium (welded-on or crimped rungs) and is simply clamped onto the rungs of your ladder. We also offer an optional model with a longer protrusion (130 cm) which allows the user to climb on and off safely. EN 353-1:2018 (incl. in former times CNB/P/11.073) Suitable for simultaneous usage by 2 individuals (1 person per glider Fixed guide with stainless steel cable (8 mm) A range of top section protrusions available - up to 130 cm Specially-designed vertical ladder glider with a blocking mechanism to apply the brakes in the case of a fall For rungs measuring max. 3.5 cm x 3.5 cm; other sizes available upon request
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel, type B roof safety hook for metal seam roofs is suitable for all directions of load (apart from axial loads). It is simply clamped onto a seam without needing to penetrate the roof surface. Our roof hook is installed quickly and easily using the 4 nuts and bolts supplied. Roof safety hook in accordance with EN 517:2006, type B Anchorage point for PPE + ladder hooks For stainless steel ≥ 0.5mm; copper and titanium zinc ≥ 0.6mm; aluminium ≥ 0.7mm Simple, penetration-free installation using just 4 bolts Designed for rounded-edge and standing edge roofs Incl. stainless steel installation set
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel roof safety hook with its flat shaft is simply installed on a continuous wooden beam. The 2 stainless steel screws supplied are screwed into the beam through the counter lathing/panelling. Special screws are also available for installing the device on top of over-rafter insulation. This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included
Request for a quoteABS SAFETY GMBH
Germany
Use this stainless steel hook device, which is firmly anchored to your building structure, to secure your ladder and prevent it from slipping and tipping. Attach it permanently to a wall or facade. Depending on your requirements, it can be screwed on, dowelled on or cemented into place using special adhesive. For fixing to a facade Ladder safety device for indoor and outdoor usage Prevents slipping and tipping Designed for rungs at least 280 mm wide Installation to be carried out using suitable installation materials depending on the surface (not included)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ABS SAFETY GMBH
Germany
This stainless steel roof safety hook - specially designed for tiled roofs - is equipped with a cranked shaft for bridging the roof lathing. Is it simply installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the woodem beam. We also supply an optional installation set for flexible attachment to a specially-prepared wooden panel (instead of a beam). This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included
Request for a quoteABS SAFETY GMBH
Germany
This low-cost, stainless steel roof hook has a cranked shaft - perfect for bridging the roof battens - and is secured in a few easy steps by simply screwing 2 stainless steel screws through the counter battens into the beam below. Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Simply screwed onto a wooden beam (min. 60 mm x 120 mm) Incl. installation materials (screw length: 160 mm length, Ø 8 mm)
Request for a quoteABS SAFETY GMBH
Germany
Thanks to its special base plate, this stainless steel roof safety hook can be flexibly adjusted to fit the angle of your roof surface. The cranked shaft is designed to bridge the battens. It is installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the beam below. Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Base plate allows flexible installation Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm
Request for a quoteSCHAKE GMBH
Germany
Folding jack „Universal“ U1500 very robust design with supporting cross tube of square tube and side welded tube socket for installation of railing posts as back guard to protect from falling or for top mounted parts.
Request for a quoteResults for
Ladder - Import exportNumber of results
10 ProductsCompany type
Category