It recycling - Import export

The MRS extruder processes undried PET bottle flake without any pre-treatment directly into pellets. The polymer melt is intensively and rapidly exchanged in the multiple screw section of the extruder. The huge surface area is exchanged at an unparalleled rate so that even with a moderate vacuum level of 25 to 40 mbar in the degassing section, contaminants are efficiently evaporated out of the melt. A letter of Non Objection (LNO) from the FDA underlines the decontamination efficiency. If, in order to boost the intrinsic viscosity (IV) a downstream solid state polymerisation system (SSP) is used, this can be specified far shorter than otherwise necessary as the extruder has already carried out the decontamination of the bottle flakes. The end product is of especially high quality with regard to transparency and yellowness.

ELKON Concrete Recycling Plant consists of a concrete discharge bin equipped with a shower system for washing waste concrete, a recycling unit separating coarse aggregates from the mixture and a pool where waste water discharges into. There is also an agitator which prevents the cement particles from sinking in the pool where the recycled water is stored. The pool where waste water is stored can be made from concrete underground or optionally 20 m³ capacity on ground water tank can be supplied. Thus the system can be installed on the ground level without any underground foundation. With optionally presented mobile concrete pump washing station, truck mixer and mobile concrete pump can be washed at the same time in ELKON Concrete Recycling Plant.

This is a plactic cover,used for machine accessories.

BEKOSPLIT splitting plants clean emulsified condensates which occur as a result of unfavourable initial conditions or of certain lubricant/compressor combinations. In addition to compressed-air condensate, other oil-containing industrial wastewaters can also be processed. Water-insoluble organic substances and a large variety of solid contaminations are removed from the water. Any heavy metals, dirt and paint particles contained in the water are reliably adsorbed

In recent years, a groundswell of negative publicity and consumer backlash has emerged against disposable plastic products, particularly bottles. Images of bottles overflowing landfills and adversely impacting ecosystems have soured consumers and drawn the ire of environmental organizations and activists worldwide. As a result, many are calling for increased government and industry intervention to address the growing problem. According to the Ocean Conservancy, a nonprofit environmental advocacy group, plastic drink bottles are the third most common type of waste item found on shorelines – behind cigarette butts and food wrappers. As the plastics and beverage industries work to address the issue by investing in new recycling technologies and waste management infrastructure, there is also an opportunity to reinforce the benefits of infinitely recyclable aluminum and to promote it as the model of sustainable packaging for bottled water and other beverages.

The D3 ECO / D3-5 ECO recycled pallet is perfect for the distribution and storage of medium loads. Dimensions L x W x H: 1200 x 1000 x 150 mm Weight: 14,0 kg - 19,0 kg Material: HDPE Load capacity: — without reinforcement profiles: static 5000 kg, dynamic 1000 kg, in racking system 400 kg — with 4 reinforcement profiles: static 5000 kg, dynamic 1500 kg, in racking system 1250 kg Colour: black Runners: 3 / 5, unwelded All runners have chamfered edges on both sides for ideal use with fork lift trucks Option: — Rim options: Without, 7 mm, 22 mm, 22 mm outside — Reinforcement profiles: 0,3, 4 — Palgrip® anti-slip runners — Pop-Ups as interlocking support for stacking of empty pallets — Anti-slip plugs from top to underside of deck — Integration of RFID transponders

Every industrial production requires energy in order to make products. Often, electrical or primary energy is induced as heat, used for operation and must then be dissipated, converted or destroyed. Our gwk process engineers analyse and calculate production processes and the overall thermal periphery with the objective of lowering the necessary energy by means of energy recycling, of reducing the energy requirement at the individual stations, of converting energy or using it several times and dissipating it sensibly. The result is considerable energy saving, which results in cost-cutting and contributes to preserving the environment.

The small steam boilers of the Junior 80 - 400 TC series are completely equipped, ready-to-operate, electronically controlled rapid steam generators with all safety devices for burner technology, pressure and temperature. With a height of only 1.5 m and 0.7 m width the Junior 80 TC steam boiler can be erected even in small spaces. Combustion: Oil or gas Steam output optionally 80 - 120 kg/h 150 - 200 kg/h 250 - 400 kg/h

EFFICIENT CLEANING – INTUITIVE, ROBUST AND SEMI-AUTOMATIC IF REQUIREDWith a basket centrifuge from the ZM range, you get a robust and easy-to-operate unit for cleaning up to 1,000 litres of process water per hour. Separate up to 14 litres of sludge in a single cycle! The sludge basket is removed and emptied manually. A PLC is available for semi-automatic operation. CENTRIFUGES IN TWO CONFIGURATIONS The ZM basket centrifuge is available in two configurations to meet your requirements. The ZM 03-ECO 1 is perfectly suited for use on a single mass finishing machine in standard applications and island solutions. For two to three mass finishing machines, the ZM 03-FL is the ideal choice. You can of course retrofit application-specific options like a pump station and recooling unit. THE BENEFITS AT A GLANCE Centrifuges with up to 2,012 times the acceleration of gravity Up to 14 l (19 kg) of sludge per cycle Up to 1,000 l of process water per hour PLC for semi-automatic operation

FULLY AUTOMATIC CENTRIFUGATION FOR CLEANING YOUR PROCESS WATERThe PLC-controlled peeling centrifuges of the ZA range are your reliable aid for fully automatic process water cleaning. The sludge is separated in a rotating drum and automatically peeled off into a sludge tank. You can set the cleaning cycles individually. MODULAR DESIGN FOR INDIVIDUAL SOLUTIONS The ZA range features a modular design, allowing you to flexibly adjust it to your needs. Select the dirt and process water tank, available in a range of sizes, as well as the additional process water pumps, dosing units or a heat exchanger, suitable for both the ZA 04 and ZA 06 configurations. THE BENEFITS AT A GLANCE Centrifuges with up to 2,417 times the acceleration of gravity PLC for fully automatic operation Two configurations: ZA 04 with a cleaning power of 1,000 l of process water per hour ZA 06 with a cleaning power of 2,000 l of process water per hour

A clear matter: disposing of process water in an operationally safe manner After vibratory finishing, the process water contains solids and pollutants such as metals, oils and greases. To prevent these from entering the sewage system during disposal, you can clean your process water - even acidic or alkaline water - in our flocculation plants. You can then discharge the clear water into the sewage system in accordance with legal regulations. DO/GA flocculation units The PLC-controlled DO and GA flocculation plants are fully automatic solutions that purify up to 2,000 litres of process water per hour. If your daily water volume to be treated exceeds 3,000 litres, these plants are the right choice for purifying your process water. RT flocculation unit The easy-to-operate and inexpensive RT unit is suitable for you if you want to purify a daily water volume of up to 3,000 litres.

For optimal waste recycling for our clients, Bezner engineers and builds waste management and recycling machinery according to customer’s recycling and sorting goals, dimensions and budget. We build both conventional components and ingeniously tailored units. Specific equipment outside our range from secondary suppliers can be included. This way, our project management team offers a turnkey solution.

There are many techniques to separate waste. Bezner has developed screening machines for the recycling industry with linear, circular, rotating, and elliptical (ballistic) sieving motions. We offer in-house engineering and manufacturing of screening machinery.

At Bezner, we engineer, build and supply a customized <a href="https://www.bezner.com/products/air-separator/">air separator</a> as a component of your recycling installation. Other names you may come across for an air separator are wind sifter (otherwise spelled as wind sifter), wind shifter or air classifier.

Our Rugs & Carpets are made of 100% Jute & Cotton. which is highly durable and eco friendly. We are producing high quality hand woven rugs with certified responsibilities. Our factories are Fairtrade, BSCI certified.