Results for
DORTEX MBH
Germany
Order your labels as iron-on labels Our no-sew laundry labels and name tapes can be ironed into place in seconds using an iron and will remain in place reliably and durably (10 seconds, no steam, press down firmly with the iron, and you're done). Particularly good for labeling laundry and other garments. But our iron-on labels are also suitable for home-sewn projects. In addition: These iron-on labels may also be sewn into place. Thanks to the iron-on coating, our cotton labels will not be able to fray.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
Large machinery parts,Textile machine accessories.China cnc machining workpiece
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
Accessories used for furniture fitting parts,connector parts.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
This parts are use for automobile brake accessories.
Request for a quoteBORNEMANN GMBH
Germany
Branding irons for hot stamping in wood, leather, rubber or synthetics for inclusion in an electric branding iron device. The iron can be supplied with a controller for stepless temperature control. This ensures a temperature-precise control of the heat development created. Overheating is thereby avoided and the labelling obtains an attractive design.
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
Iron*Area of use: Only on open burner flame.
Request for a quoteSPANSET SECUTEX GMBH
Germany
The secutex chain sleeve protects the chain (sandblasting) and the slinger. The protective hose is not well suited for the intensive use and transport of sharpedged parts due to the high surface pressure and the lack of reinforcement. Please note The chain hoses are designed for chains of quality class 8 that conform to standards.
Request for a quoteSPANSET SECUTEX GMBH
Germany
The attachment chain may only be used as an attachment accessory without edge protection if a 20% reduction in load lifting capacity is taken into consideration or if the nextlargest chain thickness is used. Otherwise, a secutex SKK hinged edgeprotector must be used. A “sharp edge” exists when the edge radius is smaller than the nominal thickness of the lifting chain. Further information is available in the “sharp edge“ chapter.
Request for a quoteSPANSET SECUTEX GMBH
Germany
Even when securing the load, the lashing material must be protected from the “sharp edge“. Highvalue loads may not be damaged by lashing chains. The secutex SKKE simple edgeprotector is simply placed onto the chain via the slit on the reverse side, making it impossible to lose. The edgeprotector is light and flexible. Due to the low deadweight and flexible textile reinforcement, the edgeprotector can be attached easily and quickly to the load. Important note The secutex SKKE simple edgeprotector is not intended for prolonged use.
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
To maintain constant temperature in your tank or container, we provide the appropriate heating system. This could e.g. be implemented by heating the container surface with heating cables for holding temperatures of up to 250 °C. Transportable electrical heating equipment, including circulation pumps, are also available for holding temperature of up to 80 °C.
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
Electrical heat tracing systems are used in all industrial sectors in order to heat up products in pipelines and vessels to maintain temperatures or to avoid freezing of the product. This type of heating offers several advantages It is highly flexible and adaptable to fulfil the specific customer requirements and ensures the effective and economic utilization of the input energy. Our customers appreciate the high accuracy of temperature control and the low maintenance costs. We offer harmonized components, engineering, delivery and installation from a single source.
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
The compact steam superheaters of type series PVN reach high steam temperatures even at low process pressure. Due to the compact design and control concept, they are characterised by short response times, high control precision, and high availability (existing redundancies). In many cases, our steam superheaters are designed as a "stand alone" system and provided completely assembled with all necessary safety devices and controls. The customer must only provide the process connection and the electrical connection.
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
The energy market called for technical solutions contributing to a mains stabilization and benefiting from the potential of favourable energy prices at the same time. The warm water boilers can be delivered in a power range from 35 kW up to 1.2 MW whereas the hot water boilers are available with a capacity of max. 10 MW. By means of parallel or series connection of several systems the power range can be extended optionally. The functional principle of warm and hot water boilers relies on the direct heating of flowing water via numerous resistance heating elements. For control purposes, they are summarized in groups which are either switched in steps or triggered infinitely variable via a thyristor power controller.
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
Klöpper Therm electric flow boilers are used for generating hot water in heating units for direct heating, storage operation or for Power to Heat systems. As an alternative to other energy types in new buildings or when converting central heating units, these boilers offer a universal range of applications radiator heating, floor heating, mixed systems or bivalent operation with other energy types. Depending on the relevant operating conditions of the energy supplier, the boilers are used for direct or storage heating by utilising free electric power during off peak times.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
PEKI float valve series made of high quality hot pressed parts and precision turned parts, assembled with modern injection moulded parts and sealing elements made in Germany . Compact design with high filling capacity manufactured in brass, chem nickel-plated and stainless steel.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TRAS MM
Germany
Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ZINC INGOT Usage: Mainly used for die-casting alloy battery industry Pharmaceutical / rubber industry Chemical industries zinc and other metal alloy plating coating industry in applied widely. Factory with strong supply ability silver white lustrous metal zinc ingot for die-casting alloy battery industry 1. mainly used for melting ingot 2. discontinuous melting with scrap 3. Used for industry such as automobile,pinning and weaving,electron broadly and so on
Request for a quoteSANHA GMBH & CO. KG
Germany
In air conditioning and refrigeration technology, particularly in commercial and industrial refrigeration systems, environmentally friendly solutions are becoming more and more important. Optimum results are been obtained by an increase in efficiency and the use of ecologically safe refrigerants such as CO2 (R744), which are mainly used in the transcritical part with higher operating pressures. However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC).
Request for a quoteTRAS MM
Germany
Email : trasmme@gmail.com SKYPE : TRAS MM ============================== MAGNESIUM INGOT The proportion of magnesium alloy is the lightest among all structural alloys, so the weight of aluminum or iron can be reduced without reducing the strength of the parts. Smelting from minerals into metals is mostly made up of raw embryos of various sizes and shapes. Magnesium Alloy Casting Ingots can be used to make all kinds of plates, wires and profiles, as well as for use in chemical industrial, military industrial and meter instrument manufacture, etc. In the elastic range, the magnesium alloy by the impact load, the absorption of energy than aluminum alloy, so the magnesium alloy has a good seismic noise reduction performance.
Request for a quoteBEULCO GMBH & CO. KG
Germany
Plastic cover for BEULCO Water meter box Round, load class A15 - up to 1,5 tons Weight: 4kg Inclusive flexible module for adjustment of height and inclination of the box
Request for a quoteBEULCO GMBH & CO. KG
Germany
Cast iron cover oval for BEULCO Water meter box rectangle, load class B125 - up to 12,5 tons Weight: 10,5kg Lockable Inclusive flexible module for adjustment of height and inclination of the box
Request for a quoteResults for
Ironing - Import exportNumber of results
28 ProductsCompany type