Insulation material - Import export

The search for solutions in the field of process engineering systems and methods presents us with new challenges every day. Electric heaters for the direct thermal treatment of incoming air in air conditioning systems or as preheater or afterburner for intake air in industrial equipment using intelligent processadapted control systems are gaining an increasing acceptance

NR SILENCERAccessories for insulation drying units Admittedly, modern side channel compressors are soundproofed at the best possible rate, however still cause function-related turbine-like noises, often perceived as disruptive by residents. Hence, the use of silent drying units is of little avail. Trotec NR silencers spare your customers unnecessary noise and this way your service will remain in good memory! Marked reductions in noise could be detected during comprehensive practical tests in applications with compressors of leading manufacturers! The universally applicable NR 19 MultiQube is especially suited for use with Trotec insulation drying units of the MultiQube series and provides still more noise reduction without dynamic pressure – With the NR 19 MultiQube, reductions of 14 to 19 dB are possible!

High-Temperature insulating hose (HT hose) protects heat-conveying lines and prevents thermal damage to adjoining parts with a fiberglass and double-coated silicon rubber top layer. The HT hose is available as a self-contained or re-closable sleeve as well as a custom-made mat. The approximate surface temperature of the duct can be up to 500°C.

Bentley-Harris® Textalu 1202 is an insulative fiberglass sleeving with a heavy aluminum coating designed to protect components in high temperature areas. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. Textalu 1202 is used on wire harnesses, sensor control wiring and cable assemblies in close proximity to engines and exhaust systems. Due to its elastic structure, Textalu 1202 conforms well to the variable profiles of the components it protects. Its braided construction allows good flexibility in temperatures as low as -50°C. The infra-red emissivity rating of Textalu 1202 heavy aluminum coating, combined with its fiberglass braid, ensures temperature stability inside the Textalu sleeving despite frequent external temperature fluctuations due to radiant heat.

TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.

Avola building site table saw ZBV 500 S with height and tilt adjustment and safety guard. The new ZBV 500-S is a height and tilt adjustable building site circular saw with a 500 mm saw blade. The ZBV 500-S also enables bevel cuts with a high cutting height on the construction site. Above all, the increasingly used insulating material can be optimally processed in connection with the AVOLA special circular saw blade HM / A / PH (see above).

Cable RTD sensor for plug-in The cable RTD sensors of the TRA-W series are constructed differently and adapted to typical operating conditions. The most important differentiating factor of the cable assemblies is their process connection, the operating temperature range and the insulation material of the connecting cable. Process connection: insertion, fittings: M8, 1/8", 1/4" and 1/2" Execution: insertion variant Temperatur range: -50 … +200°C Material: 1.4404 / AISI 316 L Sheath - Ø: 3, 6 and 8 mm Cable material: PVC, Silicon or Teflon IP protection class: 54

Cable RTD sensor for clamp-on The Cable RTD sensors of the TRA-W series are constructed differently and adapted to typical operating conditions. The most important differentiating factor of the cable sensors is their process connection, the operating temperature range and the insulation material of the connecting cable. Execution: clamp-on variant Process connection: copper block, Teflon coated, Ø 26 x 18 x 15 mm Temperature range: -50 … +200°C Material: copper / Teflon Sheath - Ø: – Cable material: Teflon IP protection class: 54

Cable RTD sensor for screw-on The cable RTD sensors of the TRA-W series are constructed differently and adapted to typical operating conditions. The most important differentiating factor of the cable sensors is their process connection, the operating temperature range and the insulation material of the connecting cable. Execution: clamp-on variant Process connection: brass block, 5 x 5 x 25 mm Temperature range: -50 … +150°C Material: brass Sheath - Ø: – Cable material: Tefzel IP protection class: 54

Cable thermometer using RTDs The cable temperature assemblies of the TRA-W series are constructed differently and adapted to typical operating conditions. The most important differentiating factor of the cable assemblies is their process connection, the operating temperature range and the insulation material of the connecting cable. Execution: clamp-on variant Process connection: copper block, 8 x 10 x 40 mm, with Ø 3mm MI-cable Temperature range: -50 … +300°C Material: copper / stainless steel Sheath - Ø: – Cable material: Elexar ( £ 105 °C) IP protection class: 54

System for the impregnation of electomagnetic coils, e.g. of electric motors, transformers, generators Impregnating in electricla engineering means applying an impregnating agent in gaseous or fluid form to a porous body in order to insulate it electrically, i.e. that reliable protection against electrical breakdown is provided even when the thickness of the insulating layer is small. For each application HÜBERS provides appropriate process. HÜBERS offers all relevant process variants including vacuum impregnation, vacuum-pressure impregnation and atmospheric impregnation and of these coupled with the use of the many different impregnating agents such as varnish, resin, oil, wax, gas etc. The processes of evacuating the parts prior to impregnation and if necessary of vacuum-drying the impregnated parts are matched to the properties of the parts and ensure that the agent wets the walls of the pores properly and fills the cavities completely.

The universal band saw blade for all construction and insulation materials of small and large dimensions running on brick band saw machines. The new variable tooth pitch ensures notably low-vibration and quiet sawing processes and assures supreme quietness. The results are clean and smooth cuts of the best quality. Thanks to its long blade life and increased durability, our further developed, precision-ground tooth geometry is particularly convincing in hard building materials: • particularly low vibration and quiet • long blade life in especially precise and smooth cuts The specialist for: • Pore or lightweight concrete • Perforated brick • Porous bricks ("Poroton") • Insulation material

Classic glue-blending systems in blowlines reach their limits when special glue systems need to be applied to bres. It is therefore not possible to apply glues that respond sensitively to higher temperatures before the dryer. Chute glue-blending systems constitute the answer to this challenge. This type of glue-blending system is used, for example, in the insulation-material industry

Hitachi High-Technologiees Europe GmbH is very pleased to introduce Toyal Vacuum Insulation Panels to the European Market. Our VIP's advantages are represented by Low Thermal conductivity, light weight, opportunity to save space and save energy and its eco-friendly performance. Features Low Thermal Conductivity: The VIP achieves the best performance of insulation in the market. Using the know-how in the field of laminating materials as an aluminum foil manufacturer, with the combination of a new developed core material (glass wool), it achieves superior performance. (a thermal conductivity: in 0.0020W/m, k *1) Leight Weight: Compared to our conventional core material, it is 1/4 lighter. It is the best solution in the wide-ranging field which requires lighter weight, such as automobile, refrigerator, cooler box, thermos, etc.