Results for
THERMA THERMOFÜHLER GMBH
Germany
Application: Panel insert for thermocouple and RTD circuits. Specially designed to be used together with Hamitherm high temperature stainless steel panels. Mechanical design: • Thermosetting body with original thermocouple material pins and springloaded inserts. • Polarized pins. • Molded barriers prevent short circuit. • Polarity indication next to connection screws.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Application: Panel insert for thermocouple and RTD citcuits. Mounting by means of a stainless steel bracket and two screws. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different pin thicknesses. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Application: Panel insert for thermocouple and RTD circuits. Specially designed to be used together with panel sets. Mechanical design: • Thermoset body with original thermocouple material pins and springloaded inserts. • Polarized pins. • Molded barriers prevent short circuit. • Polarity indication next to connection screws.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Panel insert for thermocouple and RTD circuits. Designed to used together with panel sets for assembly to complete standard panels. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different pin thicknesses. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Built-in couplings for assembly with panel kits into complete miniature panels. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP- and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Conductor guides for prevention of short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Single built-in couplings for installation in front plates, housings, etc. Attachment with two screws M 2.5. Third connection for ground or continuous shield or three wire RTD. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
The EPS insert 12104 serves as a screed placeholder for the 8602A floor sockets.
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Printable insert labels for INFO SIGN 4800 and CLICK SIGN 4860 doorplates. • PC-printable paper sheets for doorplate product # 4800 and 4860 • Suitable for all commonly available laser and ink-jet printers and copiers • Micro-perforated insert sheets for easy removal • 50 inserts on 10 sheets
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Micro-perforated, A4 insert sheets for computer labelling. Simple design with free DURAPRINT® software. • Micro-perforated, PEFC certified insert sheets in A4 format • Contains 360 insert sheets in 30 x 65 mm format • For professional printing of name badges • BADGEMAKER® inserts for table place name holders can also be used separately as place cards • For DURABLE products # 8540, 8541
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the accessories are mainly used in wide range of furniture accessories,such as the door insert, and some cabinet kit and so on...
Request for a quoteBORNEMANN GMBH
Germany
Insert holders We produce insert holders for rotating/milling centres to your drawings – also in small series and for prototypes. Contact I have read and agree to the privacy policy. *Pflichtfelder
Request for a quoteROLLON GMBH
Germany
Shuttle system for moving robots and heavy loads for long distances with high dynamics. The motion system is available with recirculating ball guides or rollers while the driving system has been designed with rack and pinion. The shuttle is equipped with adjustable ties to achieve alignment even on irregular surfaces. Cable carrier and dampers at the stroke end are included. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
For the practical organization of various bathroom utensils AGOFORM offers a further sensible solution. Our SAPHIR bathroom insert with odour trap cut-out is ideal for use in a vanity base unit. The use of variable dividers allows the size of the compartments to be customized whilst offering plenty of space for the well-organized storage of small utensils. The SAPHIR bathroom insert also does away with the need to fit a covering edge in the area of the odour trap. If desired, we can vary the height of the overhang covering the chipboard edge in this area to meet individual requirements.
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
CSN® PreInsertion Resistors are used for limitation of transients during energisation process of transformers and HVDC VSC converter applications. CSN® Discharge Resistors are used for discharge of Capacitors, reactors and superconducting magnetic field coils. They are characterized by a high dielectric strength and energy absorption capacity. CSN® PreInsertion or Discharge Resistors are designed and manufactured individually to customer requirements and specific application.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The styling of the VARIO bathroom insert allows it to offer a wide range of options for the practical storage and easy access of jewellery, cosmetics or other accessories. Thanks to additional wooden dividers the compartments can be varied in the width to meet individual requirements. A key feature is the round styling that prevents objects from slipping and sliding about. The VARIO bathroom insert is supplied as a precisely fitting accessory for the full range of drawer systems including all the radii and recesses necessary to accommodate the fittings.
Request for a quoteGHM MESSTECHNIK GMBH
Germany
Sensors are often installed in difficult-read positions. The GIA 0420-M12 plug-in display from the GHM GROUP can be turned in all viewing directions to enable readings of critical measurements directly at the location. Sensor manufacturers, plant builders and operators benefit from a flexible display device that can be installed even more easily with the worldwide standard M12 plug connection.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Application: Crimp-insert can be fitted in the entrance hole of the connector. Designed for soldering or crimping on mineral insulated metal sheathed cable or crimping on insulated wire. Construction: • Brass machined insert with 0,1 mm tolerance on the cable O.D. The adapter fits in all standard connectors.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
THERMA THERMOFÜHLER GMBH
Germany
Use: Designed for soldering or crimping on mineral insulated sheath cable or crimping on insulated wire. Construction: Brass machined, nickel plated insert with 0.1 mm tolerance on the cable OD.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
The plastic insert 12105 serves as a screed placeholder for the 8601A floor socket and is made of PVC.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
"Use:Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with Connector Mininiature CMP-XX. Mechanical design: • Aluminium front plate, anodised, protected against corrosion. • Measurement circuit numbering, abrasion- and wipe-proof. • Attachments of stainless steel and nickel-plated brass. • Montageart und Konstruktion verhindern ein Hinein- oder Herausdrücken der montierten Einbau-Kupplungen. • The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition. • Individual built-in couplings can be replaced by loosening only a few screws.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Installation clamp for ceramic jack, high-temperature Jack or miniature jack for panel installation. . Mechanical design: • All parts, including the screws, are made of stainless steel. Order no.: • A-20.210 Clamp for ceramic jack. • A-20.307 Clamp for high-temperature jack.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Panel insert for thermocouple and RTD circuits. Specially designed to be used together with Hamitherm miniature panel set. Mechanical design: • Thermoset body with original thermocouple material pins and • springloaded inserts. • Polarized pins. • Molded barriers prevent short circuit. • Rugged one body design. • Moulded barriers prevent short-circuits. • Polarity indication next to connection screws.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Built-in couplings for assembly with panel kits into complete miniature panels. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Single built-in sockets for installation in front plates, measuring device housings, etc. Attachment with two screws M 2.5. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Panel insert for thermocouple and RTD circuits. Mounting by means of two screws at front hole with a diameter of 22.5 mm. Ideal panelinsert for instrument cases. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc. Mechanical design: • Aluminium front plate, anodised, protected against corrosion. • Measurement circuit numbering, abrasion- and wipe-proof. • Attachments of stainless steel and nickel-plated brass. • The assembly type and design prevent the fitted built-in couplings from being pushed in or out. • The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition. • Individual built-in couplings can be replaced by loosening only a few screws. • Flat, flush front surface enables easy cleaning. • Standard panels with 1
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Panel insert for thermocouple and RTD circuits. Mounting by means of stainless steel bracket and two screws or with a stainless steel clip-spring. Ideal panelinsert for instrument cases. Mechanical design: Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
The plastic insert 12108 serves as a screed placeholder for the floor socket 9902A and 9902D.
Request for a quoteResults for
Inserts - Import exportNumber of results
72 ProductsCompany type
Category