Housing - Import export

CEE floor box 6522A with a housing made of stainless steel and a lockable lid made of anodised aluminum. Lid closes watertight. Degree of protection IP 65. Other configurations on request.

The housing of the 2003Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 3 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

Floor socket 7601A for outdoor use with a slot that is closed with a screw cap. The floor socket housing is made of solid, gray PVC. The rectangular frame is made of solid aluminum anodized with a stainless steel look. When closed, the 7601A floor socket is waterproof. The lid can be completely removed and can be locked with a special key. Further equipment variants on request.

Motor mechanical shell processing.

The accessories use for mechanical housing.

Dimensions Width 3.00m Length 7.00m Height 2.61m Square meters 21.00m² This offer includes 1x room, 1x toilet with sink, 1x kitchen, 3x windows, 1x entrance door Prefab container with 80 mm roof and 100 mm wall insulation. Exterior cladding made of concrete (fiber cement panels) Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switch, cable ducts, cables). We can make other sizes and colors according to your specifications at short notice. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 2.40m Length 6.00m Height 2.61m Square meters 14.40m² This offer includes 1x room, 1x vestibule, 1x toilet with sink & shower, 1x kitchen, 2x windows, 1x entrance door By request; forklift introductions. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switch, cable ducts, cables). Forklift, wheel loader with pallet fork or crane. We can make other sizes and colors according to your specifications at short notice. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Dimensions Width 2.40m, Length 5.00m, Height 2.61m Square meters 12m² Description Facilities 1 room; 1x window, 1x front door 2x full height window 1x small window Insulation 80mm ceiling, 50mm wall, 50mm floor All electronic installations are included (fuse box, 230V sockets, ceiling lights, switches, cable ducts, cables). Vinyl flooring 23mm durable. Individual room design is possible. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices are net plus statutory VAT.

EXTRA BIG !!! Dimensions Width 6.00m Length 7.00m Height 2.61m Square Meters 28.8 m² NEW! MADE IN GERMANY This offer includes 1x vestibule 1x large room 1x toilet with sink & shower 1x separate kitchen 4x windows 1x entrance door Prefab container with 80 mm PUR roof and 50 mm EPS wall insulation. By request; forklift introductions. Electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switches, cable ducts, cables). PVC vinyl floor covering 23mm durable and easy to clean. We can make other sizes and colors according to your specifications at short notice. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € The prices DOES NOT include VAT.

Dimensions Width 2.40m, Length 6.00m, Height 2.61m Square meters 14.40m² Description Equipment 2x room; 1x toilet with sink, 1x kitchen, 2x windows, 2x entrance door Insulation 80mm ceiling, 50mm wall All electronic installations are included (fuse box, 230V sockets, ceiling lights, switches, cable ducts, cables). Vinyl flooring 23mm durable. On request we offer transport with unloading. The surcharge is 300 € Individual room design is possible. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

Floor box 8808A with a square housing made of stainless steel and anodised natural aluminum lid. Inside there are two aluminum device carriers for 4 units each, alternatively other combinations are also possible. It can be installed at any point in the floor, as pipes are used to feed the cables. Lid also closes when the plugs are inserted. Due to the low installation height, this version is particularly suitable for floors in old buildings. Further equipment variants on request.

Stainless steel float hollow balls - with threaded mounting IG . The use of different sizes, shapes and materials optimises the use of PVA float valves in many applications. From the space-saving compact float made of high-quality HDPE plastic to the elaborate VA float body with individual fastening options, we can offer the right solution for almost every application.

The Freek-MicroCoil 1.3 x 2.3 mm used in the "Brazed-Together" energy-saving nozzle heater is wound tightly onto a precision tube with good thermal conductivity and encapsulated and thermally insulated by means of an outer housing. For even more reliable heat transfer, the heater can optionally be vacuum brazed. The "Brazed Together" design combines many advantages: high accuracy, good heat conduction, high power density, mechanical stability and, last but not least, up to 20% higher energy efficiency. Freek is one of the technology leaders in the field of hot runner heating and supplies the who's who of the industry. Energy efficiency is one, if not the central innovation topic here. Manufacturers of high-cavity PET hotrunners and moulds in particular benefit from the BT nozzle heaters, and in several ways: because the less energy that is put into the system, the less energy has to be taken out on the cold side, the mould. This saves even more energy and shortens the cycle time.

• You already use CAN bus, but would like to exploit the opportunities more effectively? • You are new to CAN bus and want to avoid mistakes? • You have worked with other fieldbuses before and look for an introduction to the CAN features? Benefit form MicroControl’s expertise and attend our webinars! MicroControl’s presence in various bus markets and our expertise gained in more than 25 years of experience guarantee relevant and up-to-date hands-on webinars. Increase quality and efficiency of your development projects, reduce time to market and give your products the competitive edge.

The CC-3000 light-duty operating enclosure is particularly suitable for encapsulating operator control panels, industrial computers and display components and, thanks to its modular concept, can be simply adapted to versions tailored to specific customer requirements. — Customised solutions to your specifications — Monitor-based industrial design — Freely selectable width and height (max. 600 x 600 mm) — Depths from 120 mm up to max. 255 mm — High-quality extruded aluminium sections (naturally anodised) — Customised colours from RAL range — Five possible enclosure designs — Optimum heat dissipation due to aluminium sections — Front panels internally-mounted or externally-mounted — Protection class IP65 — Screw-fixed or hinged rear panel — Internal grooves for fixing components — Extensive range of accessories

The aluminium control enclosure CC-5000 neXt offers a unique design with a number of accessories such as the status light. The rounded contours ensure the enclosure is highly recognisable in machinery and mechanical engineering applications. — Customised solutions to your specifications — Innovative and modern industrial design — Freely selectable width and height (max. 1.000 x 1.000 mm) — Depths from 75 mm up to max. 370 mm — Rounded edges, no risk of physical injury — High-quality extruded aluminium sections (naturally anodised) — Customised colours from RAL range — Optimum heat dissipation due to aluminium sections — Integrated recessed grips for simple handling — Protection class IP65 — Internally-mounted front panel — Door configurations for direct access to the interior — Slimline design for configuring flat screen systems

The CC-4000 / CC-4000 SL are modular aluminium control enclosure systems. With their outstanding technical features, the enclosures simply and efficiently encapsulate industrial controllers and operator control panels for centralised and decentralised automation in production processes. — Customised solutions to your specifications — Simple and modern industrial design — Freely selectable width and height (max. 800 x 800 mm) — Depths from 52 mm up to max. 646 mm — High-quality extruded aluminium sections (naturally anodised) — Coloured areas that emphasize the design — Optimum heat dissipation due to aluminium sections — Integrated handle elements with vertical section — Protection class IP65 — Front panels internally-mounted or externally-mounted — Internal grooves for fixing components — Product features SL (in addition to CC-4000) - Two enclosure depths (55 und 99 mm) - Slimline design - For encapsulating flat IPCs

The RJ45 connector is the most used interface in data communications. CONEC has, based on this connector interface, designed a rugged versatile connector system for Cat. 5e and Cat. 6A, that ensures reliable protection and the convenience of easily mating under the most difficult and harsh environments. The housing with bayonet coupling mechanism is in compliance with IEC 61076-3-106 and provide increased protection for the connector system against contamination and moisture (IP67 rating). Furthermore, the increased demands for mechanical stability, temperature resistance, vibration immunity and protection against EMI and UV radiation will be fulfilled. This program is supplemented by preassembled patch cables with IP67 rating in various lengths and designs. The zinc die-cast version provides an excellent protection against harsh environment.

Data communication is also required in outdoor applications. Whether in traffic engineering, in maritime environments or mobile phone applications, long transmission distances and impacts such as heat, rain, snow, salty mist and dust place high demands on all connectors. The IP67 connectors developed by CONEC provide reliable protection against environmental influences and mechanical stress. The broad portfolio includes RJ45, USB/Mini USB and Fibre Optic LC Duplex connectors in plastic, metalized plastic or full metal.

The starter kit 2 for the Ajax security system. The kit consists of the hub 2, motion detector with a photo camera to verify alarms, opening detector and key fob with panic button.

The starter kit 2 for the Ajax security system. The kit consists of the hub 2, motion detector with a photo camera to verify alarms, opening detector and key fob with panic button.

The starter kit for the Ajax security system. The kit consists of the hub, motion detector, opening detector and key fob with panic button.

The starter kit for the Ajax security system. The kit consists of the hub, motion detector, opening detector and key fob with panic button.

Wireless outdoor siren that notifies of danger using sound and light. The device is installed outside the room to raise an alarm for everyone to hear.

Wireless combined motion and glass break detector. The device helps to secure the room from intruders entering through doors and windows, and monitors the current state of the glass.

Wireless motion detector with microwave sensor that notifies the owner of first signs of home or office intrusion. Designed for rooms with air conditioners, fireplaces and where there is a likelihood of light flickering, glare and reflections.

Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature.

Wireless indoor siren that loudly notifies of an alarm during detector activation. It is installed indoors to warn of danger or deter intruders.

Small wireless detector that notifies of glass being broken by intruders. It is installed at a distance of 9 m from the window and filters events that cause false alarms about breakage.