Results for
DEMAG CRANES & COMPONENTS GMBH
Germany
Our geared motors are configured from a modular range of motors and gearboxes that are designed for a perfect match. Our modular system enables us to implement solutions tailored to meet your needs quickly and costeffectively using standardized sub-assemblies to create offset geared motors, angular geared motors and helical geared motors. This saves you valuable project engineering time – and gives you the certainty of reliable specification. At the same time, you benefit from our extensive design and application expertise in every module.
Request for a quoteRUHRGETRIEBE KG
Germany
Compact two-stage worm gear motor with solid shaft. GP-SN4F worm gear motor: Motor power available in 57W and 90W Supply voltage 24VDC High gear ratio range between 10:1 and 5000:1 Output speeds between 0.6 and 300 rpm (depending on the gearbox ratio) Effective torques between 1.5 and 7.8 Nm (depending on the gearbox ratio) Cable version (IP40) and terminal box version (IP54) Customizing options: — Shaft dimensions according to customer specifications — Flange dimensions according to customer specifications — Adaptation of motor power and supply voltage Do you have questions about our worm gear motor or need help with the selection? Our sales team will be happy to contact you in order to find the right gear motor for your application!
Request for a quoteRUHRGETRIEBE KG
Germany
The right drive solution for every challenge: The SN3B gear series is one of the most flexible and universally usable gear series form Ruhrgetriebe. The single stage gearboxes are available with a solid or hollow shaft - with or without flange. Available are different gear- and shaft positions and a large number of different motors. SN3B-Gear types: SN3B / SN3B4 / SN3BFH / SN3BH / SN3BHFL — Motor types: AC (230/400V) and DC (180/200V) — Shaft design: Solid (SN3B /SN3B4) or hollow shaft (SN3BFH /SN3BH / SN3BHFL) — Ratios: 5; 7; 11; 12; 15; 17; 20; 24; 30; 32; 38; 50; 56; 75 — Power: 120-250W — permissible torques: 11-17 Nm — effectiv torques: 3,2-23 Nm — Additional options: brake motors, UL/CSA-certification, thermal protection, encoder Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
The right drive solution for every challenge: The SN3F gear series impresses with its compact dimensions and flexible application range. The flange-gear is available with solid shaft as well as with hollow shaft. The geared motors are available as three-phase or direct current versions and can be equipped with brakes or pulse generators (on request). SN3F-Gear types: SN3F / SN3FH / SN3FL / SN3FLH — Motor types: AC (230/400V) and DC (180/200V) — Shaft design: Solid (SN3F / SN3FL) or hollow shaft (SN3FH / SN3FLH) — Ratios: 5; 7; 11; 12; 15; 17; 20; 24; 30; 32; 38; 50; 56; 75 — Power: 120-250W — permissible torques: 11-17 Nm — effectiv torques: 3,2-23 Nm — Additional options: brake motors, UL/CSA-certification, thermal protection, encoder Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
Compact single-stage worm geared motor with solid shaft. Different shaft positions are possible. Stock motors have 57W or 90W output power and a speed of 3000 rpm. An additional version with 93W and a speed of 3300 rpm is also available. The SN18 can be used wherever space is limited. It is widely used, for example, in door automation. Gearbox type: SN18 solid-shaft Motor type: 24V DC permanent magnet Mounting design: B3/B14 Ratios SN18 Solid Shaft: 2,5; 5; 7; 10; 12; 15; 18; 20; 24; 30; 38; 50; 55; 75; 100; Ratios SN18H Hollow shaft: 7; 15; 20; 30; 55; Protection class: IP40 /IP54 (Other protection classes on request) Additional data: — Motor and gear in ball bearing — worms hardened and ground — Worm wheels from special bronze For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
The right drive solution for every challenge: The SN3VH-gearmotors impresses with its compact dimensions and flexible application range. The geared motors are available as three-phase or direct current versions and can be equipped with brakes or pulse generators (on request). SN3VH-gear types: SN3VH — Motor types: AC (230/400V) and DC (180/200V) — Shaft design: Ø14 Hollow shaft — Ratios: 5; 7; 11; 15; 17; 20; 24; 30; 32; 38; 56; 75 — Power: 120-250W — permissible torques: 11-17 Nm — effectiv torques: 3,2-23 Nm — Additional options: brake motors, UL/CSA-certification, thermal protection, encoder Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteROLLON GMBH
Germany
“Lift and move” motion profile with multiple stations and long travel lengths. Synchronized movement system with hard anodized profiles. Polyamide nylon wheels with a rack and pinion system manage horizontal and vertical movement. Column modules carry out lifting movement via a recirculating ball screw drive. The column modules are operated with a single geared motor through a transmission with shafts and corner stops. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.
Request for a quoteIGUS® GMBH
Germany
The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW
Request for a quoteIGUS® GMBH
Germany
Consists of step motor, planetary gears and tensionable drive wheel, fully assembled.
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
PROFI 6 TI-H JDN Hydraulic Hoists PROFI Carrying capacities: 3 t up to 100 t Our hydraulic hoists can be deployed as an alternative to air driven units in all places where hydraulic lines, central hydraulic systems or hydraulic aggregates are existent. Standard Features predestined for application in explosion-endangered areas (Explosion protection) super-silent encapsuled and robust gear motor integrated overload switch-off only two supply connections at hoist “P” and “T”, leakage oil drained internally
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
EH 25-H JDN Hydraulic Monorail Hoists Carrying capacities: 20 t up to 100 t Our hydraulic hoists can be deployed as an alternative to air driven units in all places where hydraulic lines, central hydraulic systems or hydraulic aggregates are existent. Standard Features predestined for application in explosion-endangered areas (Explosion protection) super-silent encapsuled and robust gear motor integrated overload switch-off only two supply connections at hoist “P” and “T”, leakage oil drained internally
Request for a quoteDEMAG CRANES & COMPONENTS GMBH
Germany
Our crane end carriages, which we have developed in various designs, offer flexibility and high operating reliability. These compact, modular rail-mounted travel units can be connected direct to crane girders and load-bearing structures. Our end carriages consist of a torsionally rigid box section and complete travel units with geared motors and wheels from the Demag modular system, which can be configured for all load capacity ranges. These combinations result in solutions to meet specific application requirements for safe crane and machinery travel motions that are kind to the rails.
Request for a quoteRUHRGETRIEBE KG
Germany
The right drive solution for any application: 24V DC permanent magnet with 110W output power. Combined with the RPL050 planetary gearbox, the result is a compact drive for many industrial and mobile applications. Gear ratios i = 5, 7, 10, 25, 35, 50, 100 Output speeds between 600-30 rpm Rated torques S1 between 1.7Nm and 7Nm Backlash 1-stage <=10 arcmin / 2-stage <=14Nm Protection class IP54 Design B14 If you have any questions or require further information, please contact our sales team.
Request for a quoteRUHRGETRIEBE KG
Germany
Compact single-stage gear with solid or hollow shaft combined with a 24V DC permanent magnet motor. Different shaft positions are possible. Stock motors have 28W or 54W output power and a speed of 3000 rpm. The SN15R / SN15HR comes as a 24V-BLDC with integrated operating and control electronics, overload protection and a 4-Q Pi Controller - 40W output power and a speed of 4000 rpm. Gearbox type: SN15 (solid-shaft) / SN15H (hollow-shaft) Motor type: 24V DC permanent magnet Mounting design: B3/B14 Transmission ratios: 3; 7; 10,5; 15; 21; 30; 40; 68 Protection class: IP40 (Other protection classes on request) Additional data: — Motor and gear in ball bearing — worms hardened and ground — Worm wheels from special bronze For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
Modular single-stage gear drive with or without solid shaft Gear Type: SN5VH Motor Type: Three-Phase and Direct Current Mounting: Foot or flange Ausgangswelle: Hollow shaft or solid shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteKUBOTA BRABENDER TECHNOLOGIE GMBH
Germany
— Stainless steel hopper with stirring — agitator for consistent screw filling and mass flow of ingredient — 3 phase AC gear motors — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates Power range 1-298 dm³/h
Request for a quoteKUBOTA BRABENDER TECHNOLOGIE GMBH
Germany
— Feeder ideal for difficult flowing, sticky or floodable bulk ingredients at low feed rates — Separate screw and agitator motors (3 phase AC gear motors), except models MT and DDSR20 — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates Power range 1-489 dm³/h
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KUBOTA BRABENDER TECHNOLOGIE GMBH
Germany
— Loss-in-weight feeder for powders and pellets — Stainless steel hopper with stirring — agitator for consistent screw filling and mass flow of ingredient — Separate screw and agitator motors (3 phase AC gear motors), — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates Power range - Different Versions 4-3743 dm³/h 20-3743 dm³/h
Request for a quoteKUBOTA BRABENDER TECHNOLOGIE GMBH
Germany
— Feeder ideal for difficult flowing, sticky or floodable bulk ingredients at mid feed rates — Separate screw and agitator motors (3 phase AC gear motors), except models MT and DDSR20 — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates Power range - Different Versions 4-2693 dm³/h 20 - 2693 dm³/h
Request for a quoteKUBOTA BRABENDER TECHNOLOGIE GMBH
Germany
— Feeder ideal for difficult flowing, sticky or floodable bulk ingredients at mid feed rates — Separate screw and agitator motors (3 phase AC gear motors), except models MT and DDSR20 — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates Power range 50-7500 dm³/h
Request for a quoteRUHRGETRIEBE KG
Germany
Two-stage gear drive with solid shaft Gear Type: SN12 Motor Type: Three-Phase, Direct Current and Permanent Magnet DC Mounting: Gear Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
Two-stage gear drive with solid shaft Gear Type: SN6F Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
Two-stage gear drive with solid shaft Gear Type: SN4F Motor Type: Three-Phase, Direct Current and Permanent Magnet DC Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
Two-stage gear drive with solid shaft Gear Type: SN6 Motor Type: Three-Phase and Direct Current Mounting: Motor Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
Two-stage gear drive with solid shaft Gear Type: SN7F Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
Two-stage gear drive with solid shaft Gear Type: SN4B Motor Type: Three-Phase and Direct Current Mounting: Motor Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
Single-stage gear drive with solid shaft Gear Type: SN10SV Motor Type: Three-Phase and Direct Current Mounting: Gear-Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
Single-stage gear drive with solid shaft Gear Type: SN14 Motor Type: Three-Phase and Direct Current Mounting: Gear Foot / Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
Single-stage gear drive with solid shaft Gear Type: SN5FR Motor Type: Three-Phase, Direct Current and Permanent-Magnet DC Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.
Request for a quoteResults for
Gear motor - Import exportNumber of results
85 ProductsCompany type