Floor - Import export

Round floor socket 7003A made of saltwater-resistant aluminum, with 2 slots and a lockable lid. The lid can be removed completely. Single box to be set at floor level, heavy design, accessible by car. Splash proof when closed, protection class IP 65. Standard surface in natural aluminum anodized. Other colors and equipment options on request.

The surface of the perforated metal plank, type BN-GA is a mix of closed punched nobs facing upwards and conical drain holes facing downwards. This means that the grating does not have any sharp edges on top and can be walked on easily even without footwear. At the same time, however, any liquids can be quickly drained through the conical drain holes so that no hydroplaning can occur.

The perforated metal plank type BN-OP5 “Noppe, offen plus, 5mm“ was especially developed for pedestrian areas with „High Heel Proof“ requirements. The bothsided punched holes have a diameter of 5mm. The punching sequence corresponds to BN-OP7. This type of planking offers high slip resistance and also allows ladies in stiletto heels to walk safely on the gratings. Due to the small hole configuration it is difficult to see through from underneath, which is important in public access areas. The perforated metal plank type BN-OP8, corresponds to type BN-OP5 in terms of the punching pattern, but have twice the number of holes. The drain holes have a diameter of 8 mm and thereby increase the drainage performance and light and air permeability..

Perforated metal planks, type BP-oN is very interesting for shelving areas, due to the smooth surface without holes or nobs. The type BP-oN is especially interesting for cantilever rackings based on its wide free span.

The perforated metal plank type BR is particularly suitable for areas of heavy loads on small contact areas due to its rhomb profile with extra high punching (punched holes 2.5 mm). Here, for example, vehicle navigability on ramps or parking areas are to be considered.

Perforated metal planks, type BP “parallel”, are characterised by their smooth line profiling and high loading capacity. For this reason this type is frequently used when large areas have to be covered in industrial areas and where stringent demands are made on load bearing capacity. This type can also be supplied without holes and is therefore ideal for use in the shelving construction sector.

Perforated metal planks, type BP-UE are characterized by the highest slip resistance class, their smooth line profiling and high loading capacity. For this reason this type is frequently used in slippery areas and where stringent demands are made on load bearing capacity.

Height-adjustable floor tank 8908B with 8 slots. The housing is made of sendzimir galvanized sheet steel, the frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid, with two versions of cable outlets, closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Floor box 8810B made of polished stainless steel for 10 units. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The rimless lid also closes when the plugs are inserted and is designed for sticking on floor coverings. Further equipment variants on request.

Floor box 8808T with 8 slots made of polished stainless steel. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The lid is designed for the inlay of carpets, cork floors or the like, with a covering thickness of 5–7 mm, and closes even when the plugs are inserted. Further equipment variants on request.

The housing of the 2003Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 3 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

The housing of the 2003A floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 3 installation devices. The sockets have a VDE mark. Further equipment variants on request.

Floor socket 7604A for outdoor use with 4 separate sockets, which are closed with a screw cap. The floor socket housing is made of solid, gray PVC. The rectangular frame is made of solid aluminum anodized with a stainless steel look. When closed, the 7604A floor socket is waterproof. The lid can be completely removed and can be locked with a special key. Further equipment variants on request.

Floor socket 9902D made of solid aluminum with 2 slots. The cover is anodized in natural aluminum and closes in a straight or angled shape even when the standard plugs are inserted. By turning the cover by 180°, this version is also suitable for cleaning with wet sweepers. Further equipment variants on request.

Floor socket 8900B, compact and height-adjustable with one slot. The housing is made of sendzimir galvanized sheet steel. The frame and the lid are made of stainless steel. Floor coverings, stone slabs, paving stones, decking, etc. with a thickness of 15 mm can be used in the lid. With integrated magnet for easy opening of the socket. Further equipment variants on request.

Floor socket 8802B made of aluminum with lid for laying on. The rimless lid can be covered with floor coverings and closes in straight or angled form even when standard plugs are inserted. Further equipment variants on request.

Floor socket 8802A made of solid aluminum with lid to hang on. The lid is anodized in natural aluminum and closes in a straight or angled shape even when the standard plugs are inserted. Other colors and equipment options on request.

Reliable drainage of surface water from paving. Box channel, whose height can be increased with millimetre precision using the VOLFI Systems. Drainage grids, drainage gullies and floor drains for rapid water discharge from large areas of paving.

Ideal as paving edging, gravel stop profile, boundary profile and for green roofs. Different material thickness and heights from 15 to 250 mm. Accessories: inside corners, outside corners, connectors and cover profiles.

VOLFI Twist Pedestal supports for adjustable raised floors. Continuously adjustable pedestal supports in various heights (from 20 mm to 265 mm) for laying dimensionally accurate slabs on solid/ level substrates. Subsequent height adjustment is possible through the joint, using the Premium Adjustment Key. Choose between different support types for either lay slabs in low-heights, protect your paver or tile with rubber-coated support surface or let the pedestal automatically compensate for a substrate gradient of up to 8% with a self-leveling head.

Especially ideal for laying concrete pavers on patios and balconies. Concrete and natural stone slabs can be laid quickly and precisely. Our pedestal support with four separately adjustable support points, various positioning lugs, and integrated locking mechanism can be increased to at least 260mm overall height by combining with various VOLFI System components. Pro Tip: VOLFI 4-C Pedestals are probably the only supports making it easy to use slabs of different types on the same raised flooring.

Universal Adapter between VOLFI Stackable Support or Twist Pedestal and VOLFI Basic Support. Can be used in all VOLFI systems to achieve varying joint widths.

For patio projects with only few installation-height differences fixed-height supports get used often for clever sparing as an alternative to more complex adjustable pedestals. The components can be combined with each other to flexibly create raised-floors from 10 to above 250mm height. For universal use as high-quality stackable supports or also for elevations of various VOLFI System components.

The ideal aid for laying paving on a gravel bed. Extra-large bearing surface for better slab stability (solid version). For footfall sound insulation and decoupling or as a low-height standalone slab support (rubber-coated version).

Extra-wide spacers for paving joint widths of up to 40 mm, green joints or grass cross spacers. For stack bond, stretcher bond or as line spacers.

CEE floor box 6400E with one slot. The housing of the CEE floor box is made of stainless steel, the device carrier is made of aluminum. Installation can take place anywhere in the floor, since pipelines are used for the line feed. The lid closes even when the plug is inserted. Further configuration variants on request.

Our classic product in countless variations. With or without a 2 mm base plate. For easy, systematic slab laying on solid/ level substrates.

In 1999, Schöpp-Sportboden GmbH launched the Slide quality, the first textile tennis floor with a loop structure, an absolute product innovation on the market. The revolutionary advantage of this generation of surfaces was that the larger amount of granules required for playing with profiled tennis shoes is held much better thanks to the pronounced loop structure. The distinctive rubber structure ensures even gliding behaviour when playing with profiled shoes! In 2010, we further developed the structure of our structured loop granule surface. The new herringbone structure Winner is characterised by a particularly coarse structure for an even more sustainable, uniform granule distribution and very sand-like ball bounce properties. With a yarn count of 1,000 g/sqm and 256,000 N/sqm, proven on approx. 1,000 Slide and Winner pitches, SCHÖPP® Winner has an extremely high-quality tuft construction.

Like SCHÖPP®Pro-Bounce, SCHÖPP®-Champion is produced from a particularly coarse and robust polyamide yarn with a single filament thickness of 200 dtex. Due to the greater pile height of 6 mm and a lower filament density, the surface is less aggressive than that of the "textile hardcourt". The comfortable SCHÖPP® Champion is therefore primarily aimed at amateur and club players. Its ball bounce is slow, similar to a sand court. Topspin and slice are slightly softened. Thanks to the very robust surface construction, this surface can also be played on with profiled tennis shoes without granules. With the optional granule infill of 400 g/sqm Perfect Glide extruded granules, the SCHÖPP® Champion is reminiscent of a needled nonwoven velour. For several decades, velour needlefelt floor coverings with granulate infill have proven their worth as tennis floor coverings. These surfaces were made of 100 % polypropylene fibre.