Results for
RUDOLF UHLEN GMBH
Germany
• Inspection glass for flip-down goggles with dimensions 59x49mm • Fit into the window of flip-down goggles GFKBR003 / 005 / 007 • Available with various protective filters: • Inspection glass, blue, shade 4-7 • Welding glass, green, in shades 3 to 12 • Clear glass • Polycarbonate • All protective flters are also available as laminated glasses (SPFR) and gold-coated (GBD)
Request for a quoteRUDOLF UHLEN GMBH
Germany
• Round glasses with diameter of 50mm • Fit into the window of Bochumer Brille BFKBB003 and the welder´s leather hood GFKBR001 • Available with various protective filters: • Inspection glass, blue, shade 4-7 • Welding glass, green, in shades 3 to 12 • Clear glass • Polycarbonate • All protective flters are also available as laminated glasses (SPFR) and gold-coated (GBD)
Request for a quoteRUDOLF UHLEN GMBH
Germany
• Inspection glass for flip-down goggles with dimensions 62x52mm • Fit into the window of flip-down goggles GFKBR002-1 / 004-1 / 006-1 • Available with various protective filters: • Inspection glass, blue, shade 4-7 • Welding glass, green, in shades 3 to 12 • Clear glass • Polycarbonate • All protective flters are also available as laminated glasses (SPFR) and gold-coated (GBD)
Request for a quoteRUDOLF UHLEN GMBH
Germany
• Lenses with dimensions 60x120mm • Fit into the window of Bochumer Brille BFKBB001 and BFKBB004, as well as the wire mesh visor with window BFKHI008-ALU • Available with various protective filters: • Inspection glass, blue, shade 4-7 • Welding glass, green, in shades 3 to 12 • Clear glass • Polycarbonate • All protective flters are also available as laminated glasses (SPFR) and gold-coated (GBD)
Request for a quoteRIPPERT ANLAGENTECHNIK GMBH & CO. KG
Germany
With high-quality filter tubes and PTFE diaphragms. Paint dust filters Wet painting also results in overspray. Overspray is the solid portion of the paint that is not taken up by the workpiece. According to the purpose of use, the overspray is moist and sticky immediately after release. It is captured by the exhaust air stream in the spray booth and fed to a filter. This can be, for example, a baffle plate filter, paper filter, fleece filter, glass fibre filter or also combinations of these. The adhesive effect causes the paint particles to adhere to the contact surfaces of the respective filter medium, as a result of which a good degree of separation is achieved. However, all these filters are storage filters, i.e. the filters clog up more and more during operation and cannot be regenerated. A filter exchange becomes necessary if the exhaust air rate of the spray booth falls below the minimum. This can be very time-consuming under certain circumstances and the work process must be interrupted in order to do it. To make things worse, not only must the filtered and bound paint residues be disposed of, but also the actual filter materials. Such tooling times are not justifiable for automatic, continuous or multi-layer painting processes. Continuous procedures such as automatically cleaned filters are likewise required for this. The humidity and the adhesiveness of the particles to be filtered are thereby the problem. In order to solve this problem, the paint particles should be relieved of their adhesive capability as far as possible whilst still inside the paint booth. Our patented ‘RTS-Rotation’ system is outstandingly well suited for this. The system is comprised of slowly rotating brush rollers, which take up the adhesive paint particles on the surface of the bristles and allow them to dry there. The bristles are automatically regenerated at pre-specified time intervals by combing devices that swing in at the rear of the brush rollers. The dislodged paint residues can then be removed and disposed of either manually during work breaks or automatically during operation. The degree of separation of this system is, however, insufficient to satisfy the environmental protection requirements concerning residual dust content in the exhaust air. A further filter stage is necessary for that. It must be assumed that the paint particles arriving here are to a certain extent still damp and sticky. For this we use special paint dust filters with high-quality filter tubes with PTFE diaphragms. If necessary, precoating agents (auxiliary dust) are used in order to neutralise the adhesive capability of the particles and to keep the dust layer on the filter elements permeable to air. The precoating agent is injected into the raw air pipe by means of special dosing units. The filter tubes are cleaned by means of compressed air impulse cleaning. The use of this technology requires special know-how. We have had the appropriate experience for almost ten years. The implemented plants have capacities ranging from 5,000 to 90,000 m³ /h. Because of the large number of different paint systems, individual experiments are usually necessary in our pilot plant in order to find the correct solution for the individual case.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
RIPPERT ANLAGENTECHNIK GMBH & CO. KG
Germany
Spray walls and spray booths with dry separation via pre-filters and fine filters. Spray walls and spray booths with dry separation For lower utilisation times or overspray quantities, spraying systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular spraying system type RTS enables individual adaptation to the respective case of need. Function The overspray is caught by the exhaust air stream and fed to the filter. The solids are filtered out here, while the cleaned exhaust air is blown out into the open air by the fan. Versions The entire spray wall and the drip tray are made of galvanised sheet steel. The basic version consists of a wall with a two-fold filter stage. The attached radial fan is equipped with spark protection in the suction nozzle as well as an explosion-proof motor. The first filter stage is formed by a paper filter or a baffle plate filter, consisting of two rows of galvanised sheet metal lamellae arranged one behind the other. A glass fibre fine filter arranged directly behind it represents the second filter stage. The spray wall can additionally be equipped with removable or fixed side and ceiling panels. Each version is also available with floor suction pan, available with an integrated 2-stage filter and grating cover. Accessories In addition, the spray wall can be equipped with various accessories from the Rippert product range, such as explosion-proof lights, energy-saving flaps, turntables, etc. We recommend the installation of a supply air system for the replacement of the exhausted air. Cleaning / maintenance The spray wall is designed such that the filter elements can be exchanged with little effort in a very short time. For faster cleaning, baffle plate filters should by sprayed with a release agent (e.g. strippable varnish) before being put into operation. Underfloor paint mist extraction With dry separation, consisting of a support structure with attached paper filter, grating cover and a suction duct with air quantity adjustment.
Request for a quoteResults for
Filtering glass - Import exportNumber of results
7 ProductsCompany type
Category