Filter elements - Import export

We produce basket filters and wire basket inserts of any kind according to customer specifications. Normally perforated plates with round or square perforation as well as wedge wire elements serve as base bodies. The filter baskets are lined inside or covered outside with plain or with pleated wire cloth, according to customer requirement.

We produce filter elements in a virtually unlimited variety: plain or pleated, cylindrical or conical. They are used for the filtration of gaseous and liquid media.

Filter belts are used for a continuous filtration of polymer melt. These filter belts, but also wire mesh pre-cut parts, are manufactured in various dimensions and weaves. For high demands the fabrics are available with high tenacity warp wires. Plasma cut edges assure a continuous and frictionless passage of the filter belts Materials:Stainless steel, plain steel, combinations of various materials.

Due to the required hydraulic oil resistance, PES/PET fabrics and injection moldings made of PA6-GF25 or PA66-GF30 are mainly used. For higher temperatures or pressures, calendered stainless steel mesh is also used.

CF 30 G equipment is supplied completely assembled and ready for operation. The dust collection unit is suited for intermittent operation only, because regular cleaning of the pocket filter element in certain intervals is an absolutely must for the proper operation of the equipment. The cleaning intervals will depend on the operating conditions and must be established by experience. Normally cleaning intervals will be between operating times of 30 minutes to two hours. It is a prerequisite for sufficient and intensive cleaning of the filter cloth that dust collecting is interrupted during cleaning to achieve static pressures on the filter material. A retention time of 1 - 2,5 minutes between the end of the suction and the beginning of the cleaning process is therefore required. The filtered air must be removed outside - do not lead back to closed rooms!

Sieves, strainers and filter elements are manufactured by injection molding Either a plastic mesh or a metal mesh is placed inside the mold and overmolded with plastic. We focus on small and medium quantities from manual to semiautomatic series production.

WATER SEPARATOR WA 4I MULTIQUBEWater separator WA 4i for combination with MultiQube insulation layer dryers The new WA 4i is provided with an integrated micro filter system with low-maintenance magnetic lock filter compartment to take in micro filter cartridges with a threefold filter element. This makes the WA 4i a versatile integral solution with all pre-HEPA filter stages in only one device. Advantage: improved flow-optimized filter technology, quicker setup, decreased material and space requirements – no separate additional micro filter housings required. With respect to insulation drying of surfaces sized up to 40 m², no other model is quite fit to hold a candle to this separator, for despite its ultra-compact dimensions the WA 4i comes fully equipped with numerous practice-oriented detailed solutions, such as a construction yet easier to maintain, TTKwic quick couplings, cable holder, residual water drainage and much more.

Economic acquisition, powerful performance values and simple handling – these characteristics are combined in a robust metal construction of the air cleaner TAC 1500 S that is suitable for use on construction sites. Its Monoventic regulator enables you to steplessly adjust the air volume precisely to your actual needs, and the flexible filter system allows for the use of variable filter combinations for every construction site situation. With the TAC 1500 S you can reliably filter coarse and fine dust or spray paint mist as well as concrete dust, fine sanding or plaster dust and highly dangerous quartz dusts or asbestos fibres. The filter frame can be flexibly equipped with one or two filter elements, for example a G4 filter or an additional F7 filter, so that in combination with the HEPA filter a two- or three-stage air purification process in accordance with dust class H can be achieved.

Lödige has years of expertise in continuous granulation. Nowadays, continuous ringlayer mixers are established systems for continuous granulation in many industries. However, until now the Lödige product range was missing a suitable dryer. The continuous fluid bed dryer closes this gap. Together with the ringlayer mixer CoriMix® and the customer-specific dosing system, this dryer provides a complete continuous granulation line: GRANUCON®. Dryer operation is based on the fluid bed process. A general disadvantage of continuous fluid beds is the wide retention time distribution within the machine. Lödige’s developers have looked into this problem and have found a solution: integrating a screw in the fluid bed dryer. This has a limiting effect on the retention time distribution. — Exchangeable floor — Quick screw removal — Integrated WIP cleaning — Individual purging of filter elements

Screw-In and Plug-In Elements Star-Pleated Elements, Basket and Ring Sieves Heavy Fuel Elements Paper, Inorganic Glass Fibre and Polyester Elements Plastic Elements Multimantle Elements

STAUFF manufactures one of the most comprehensive ranges of replacement filter elements for hydraulic and lubrication applications which are compatible with most of the common competitor products. The STAUFF Replacement Element Program includes replacement elements for over 10.000 part numbers covering almost every major international brands of filter elements. The majority of these are available from stock. Continuous improvement of the materials used as well as strict quality controls which take into consideration international standards guarantee the consistently high performance data of the filter elements. ▪ Innovative research, design and development ▪ Modern production lines with complete monitoring of production ▪ Certified work processes in accordance with: - ISO 9001:2008 (Quality management), - ISO 14001:2004 (Enviromental protection) - OHSAS 18001:2007 (Occupational health and safety) ▪ Comprehensive stocks and quick delivery ▪ Customised products in accordance with...

BPLS Bypass Filters are used as an additional micro filter connected in bypass to the conventional main stream filters on engines (and automatic transmissions.) Filter ElementS ▪ Filter elements of SRM series Construction ▪ Bypass Lube-Oil Filters (for engines and transmission systems) Maximum Sump Size ▪ 35 l / 9.25 gal Housing Volume ▪ 2,2 l / 0.58 gal Port Connections ▪ G1/4 Materials ▪ Aluminium

STAUFF Systems Units are characterised by their extremely efficient filter elements which are rated to 0,5 micron. Specially designed for industrial hydraulic installations the STAUFF Offline Filters are available in single or double length configurations. The Offline Filter Units can easily be mounted to new and existing hydraulic installations. By means of an integrated motor/pump unit and an Offline Filter, the oil is pumped from the reservoir through the filter unit and after filtering the oil is then returned to the tank. Motor/Pump Units ▪ Different configurations available ▪ Air driven motors Clogging Indicators (available as an option) ▪ Visual clogging indicator Filter Elements ▪ Filter elements of SRM series Pre-Filter Elemets ▪ Spin-On filter elements of SF67 series Construction ▪ Offline filter with integrated motor/pump unit ▪ Offline filter units with up to four filter housings in single or double length configurations Nominal Flow Rate ▪ 2,1 ... 17 l/min / .55...

STAUFF RFS Carbon Steel Return Line Filters are designed as tank top or in-line filters. They are mounted directly on the tank top and if 100% of the system oil is filtered, they provide the optimum removal of contaminants from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The filter bowl is designed with a connection, threaded or flanged, for extending the return oil beneath the surface thus preventing the entrainment of air. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Filter Elements ▪ Filter elements of RE series Construction ▪ Tank top or in-line mounting Operating Pressure ▪ Max. 25 bar / 365 PSI Nominal...

STAUFF Return Line Filters RF are designed as tank top filters. They are mounted directly on the tank top and when 100% of the system's oil is filtered they provide the optimum removal of contamination from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The filter bowl is designed to return the oil beneath the surface thus preventing the entrainment of air by the returning oil. A high efficiency of contaminant removal is assured by using STAUFF RE series Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass valve Clogging Indicator ( available as an option ) ▪ Visual clogging indicator or electrical clogging switch Leakage Oil Connection ( available as an option ) Filter Bowl with Threaded Connection ( available as an option ) Filter Elements ▪ Filter elements of RE series Construction ▪ Return...

STAUFF is completing its extensive range of Mobile Filtration Systems of the SMFS series with another type: The SMFS-U-DL-015-G is the first unit that has the filtration components including a high-quality motor/pump unit used along with a sturdy transport cart for 200l / 52 US GAL oil drums with a weight up to 250 kg / 551 lbs. Either compact and versatile on the one hand, but also made for high loading capacity on the other hand, this filtration system is an essential tool for the in-plant service and preventive maintenance, either when transferring fresh fluids or purifying hydraulic and lubrication oil systems. Replacement Filter Elements ▪ Filter Elements of the Spin-On series SFC-57/58 ▪ Micron rating available from 3 ... 125 μm ▪ Also available with a blank filter element (SFC-5700) for the reason of used oil to be removed from the hydraulic reservoir Clogging Indicator ▪ Visual Pressure Clogging Indicator Type SPG-040 Lance ▪ Length 300 mm / 11.82 in Hose ▪ Available...

The SMFS-U-030 is a Mobile Filtration System mounted on a robust Steel frame push cart, which means the perfect compromise between flexibility on the one hand and highest nominal flow rates on the other hand. Replacement Filter Elements ▪ Filter Elements of the Spin-On series SFC-57/58 ▪ Micron rating available from 3 ... 125 μm ▪ Also available with a blank filter element (SFC-5700) for the reason of used oil to be removed from the hydraulic reservoir Clogging Indicator ▪ Visual Pressure Clogging Indicator Type SIM 04 Lance ▪ Length 450 mm / 17.72 in Hose ▪ Available length 3 m / 9.84 ft incl. ports Construction ▪ Mobile filter system - mobile unit Weight ▪ 58,5 kg / 129 lbs Nominal Flow Rate ▪ Max. 30 l/min / 7.5 US GPM (depends on the viscosity of fluid) Motors ▪ 230 V AC 50 Hz or 400 V AC 50 Hz ▪ 0,75 kW; 1400 U/min Media Compatibility ▪ Suitable for mineral oils, other fluids on request

STAUFF Return Line Simplex Filters SRFL-SW are specially developed for direct installation into the pipeline of industrial water cycles. Depending on their size, SRFL-SW filter housings are suitable for nominal flow rates up to 13.330 l/min / 3.300 US GPM at a maximum operating pressure of 16 bar / 232 PSI. The SRFL-SW have been designed to be used in the steel industry for pre-filtering or coarse filtering in descaling plants. For use with deminerlised water we recommend the Return Line Filters SRFL-SW in Stainless Steel. The filter element construction as a Stainless Steel basket screen filter ensures a long service life. Valves (available as an option) ▪ Drain valve Clogging Indicator (available as an option) ▪ Differential pressure gauge Filter Elements ▪ Filter elements of REL series Construction ▪ Industrial filter, designed for in-line applications in water cycles ▪ Version: Simplex Operating Pressure ▪ Max. 16 bar / 232 PSI Nominal Flow Rate ▪ Max. 13330 l/min / 3521 US...

STAUFF Return Line Simplex Filters SRFL-S and Duplex Filters SRFL-D are designed for in-line hydraulic applications. With its compact construction and the easy to maintain assembly the SRFL-S and SRFL-D Filters are suitable for flow rates up to 7000 l/min / 1850 US GPM. The two housings of the Duplex Filter SRFL-D are connected with a special gate valve that is operated with a level or hand wheel. Therefore the filter may be serviced without shutting down the hydraulic system. A high efficiency of contaminant removal is assured by using STAUFF RE series Replacement Filter Elements. The high dirt-hold capacity of STAUFF Elements ensures a long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass valve Clogging Indicator ( available as an option ) ▪ Differential pressure switch with visual gauge indicator Filter Elements ▪ Filter elements of RE series Construction ▪ Two versions: Simplex or Duplex ▪ With switch control for maintenance...

STAUFF RFB Return Line Filters are designed as tank top filters. They are mounted directly on the tank top and if 100% of the system oil is filtered they provide the optimum removal of contaminant from the system. This provides the pump with clean oil thus reducing contaminant generated wear. Because of it’s low weight and compact design, the STAUFF RFB Filters are ideally suited for mobile hydraulic applications. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Air Filter Element (available as an option) ▪ Filter paper micron rating 10 µm, other filter materials and micron ratings on request Filter Bowl with Threaded Connection (available as an option) Filter...

STAUFF RFA Return Line Filters are a one piece design and can be used as a tank top or an in-line filter. They are mounted in the return line and if 100% of the system oil is filtered, provide the optimum removal of contaminant for the systems. This provides the pump with clean oil, thus reducing contaminant generated wear. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Leakage Oil Connection (available as an option) Filter Bowl with Threaded Connection (available as an option) Filter Elements ▪ Filter elements of RE series Construction ▪ Tank top or in-line mounting Operating Pressure ▪ Max. 25 bar / 265 PSI Nominal Flow Rate ▪ Max. 110 l/min / 30 US...

STAUFF High Pressure Filters type SFZ are designed for sandwich plate mounting in hydraulic and lubrication applications, with a maximum operating pressure of 315 bar / 4.560 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass, reverse flow, non-return or multi-function valve Clogging Indicator ( available as an option ) ▪ Visual, electrical or visual-electrical differential pressure indicator Filter Elements ▪ Filter elements of SE series Construction ▪ High pressure filter designed for sandwich plate mounting ▪ Available as left or right version Operating Pressure ▪ Max. 315 bar / 4.560 PSI Nominal Flow Rate ▪ Max. 30 l/min / 8 US GPM Materials ▪ Filter head: Free Cutting Steel ▪ Filter bowl: Cold Drawn Steel Media Compatibility ▪ Mineral oils, other fluids on request

STAUFF High Pressure Filters type SF-SM are designed for manifold block mounting in hydraulic and lubrication applications, with a maximum operating pressure of 315 bar / 4.560 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass, reverse flow, non-return or multi-function valve Clogging Indicator ( available as an option ) ▪ Visual, electrical or visual-electrical differential pressure indicator Filter Elements ▪ Filter elements of SE series Construction ▪ High pressure filter designed for manifold mounting ▪ Threaded mounting holes and fluid ports on side of head ▪ Option of standard or two-part top loader version Operating Pressure ▪ Max. 315 bar / 4.560 PSI Nominal Flow Rate ▪ Max. 1.135 l/min / 300 US GPM Materials ▪ Filter head: Spheroidal Graphite Cast Iron ▪...

STAUFF Medium Pressure Filters type SMPF are designed for in-line hydraulic and lubrication applications, with a maximum operating pressure of 110 bar / 1.600 PSI. Used together with STAUFF SME series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass valve Clogging Indicator ( available as an option ) ▪ Visual or visual-electrical differential pressure indicator Filter Elements ▪ Filter elements of SME series Construction ▪ Medium pressure filter designed for in-line assembly Operating Pressure ▪ Max. 110 bar / 1.600 PSI Nominal Flow Rate ▪ Max. 90 l/min / 25 US GPM Connections ▪ Option of BSP or SAE O-ring thread Materials ▪ Filter head: Aluminium ▪ Filter bowl: Aluminium Media Compatibility ▪ Mineral oils, other fluids on request

STAUFF Medium Pressure Filters type SFA are designed for in-line hydraulic and lubrication applications, with a maximum operating pressure of 160 bar / 2.320 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass, reverse flow, non-return or multi-function valve Clogging Indicator ( available as an option ) ▪ Visual, electrical or visual-electrical differential pressure indicator Filter Elements ▪ Filter elements of SE series Construction ▪ Medium pressure filter designed for in-line assembly ▪ Threaded mounting holes on top and fluid ports on side ▪ Low weight and compact design Operating Pressure ▪ Max. 160 bar / 2.320 PSI Nominal Flow Rate ▪ Max. 240 l/min / 70 US GPM Connections ▪ Option of BSP, NPT, SAE thread or SAE flange (ISO 6162-1) Materials ▪ Filter head: Cast...

STAUFF High Pressure Filters type SF are designed for in-line hydraulic and lubrication applications, with a maximum operating pressure of 420 bar / 6.000 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass, reverse flow, non-return or multi-function valve Clogging Indicator ( available as an option ) ▪ Visual, electrical or visual-electrical differential pressure indicator Filter Elements ▪ Filter elements of SE series Construction ▪ High pressure filter designed for in-line assembly ▪ Threaded mounting holes on top and fluid ports on side ▪ Option of standard or two-part top loader version Operating Pressure ▪ Max. 420 bar / 6.000 PSI Nominal Flow Rate ▪ Max. 1.135 l/min / 300 US GPM Connections ▪ Option of BSP, NPT, SAE thread or SAE flange (ISO...

STAUFF High Pressure Filters type SF-TM are designed for manifold block mounting in hydraulic and lubrication applications, with a maximum operating pressure of 315 bar / 4.560 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass, reverse flow, non-return or multi-function valve Clogging Indicator ( available as an option ) ▪ Visual, electrical or visual-electrical differential pressure indicator Filter Elements ▪ Filter elements of SE series Construction ▪ High pressure filter designed for manifold mounting ▪ Threaded mounting holes and fluid ports on top of head ▪ Option of standard or two-part top loader version Operating Pressure ▪ Max. 315 bar / 4.560 PSI Nominal Flow Rate ▪ Max. 1.135 l/min / 300 US GPM Connection ▪ BSP Materials ▪ Filter head: Spheroidal...

Combination of air breather and water removal filter with integrated check valves to increase the lifetime of the desiccant material; particularly suited for gearbox applications Features ▪ Available in 4 different sizes with diameter of Ø68 mm / Ø2.68 in, Ø100 mm / Ø3.94 in or Ø130 mm / Ø5.12 in ▪ Equipped with spring-loaded check valves in opposing directions with an opening pressure of 0,01 bar / .15 PSI ▪ Refillable with drying agent (non-toxic ZR gel grain) or a mix of drying agent and active carbon ▪ Drying agent capable in changing colour from Red to orange with increasing moisture ▪ Without dangerous substances according to EC Council directives 99/45/EC and 2001/60/EC ▪ Replaceable air filter element SGB ▪ Connection: Male BSP thread (ISO 228) ▪ Adaptor plate ▪ Visual contamination indicator ▪ Drying agent refilling material ▪ Active carbon refilling material ▪ Replacement air filter element

Combination of air breather and water removal filter Features ▪ Available in 4 different sizes ▪ Diameter of Ø100 mm / Ø3.94 in or Ø130 mm / Ø5.12 in ▪ Refillable with drying agent (non-toxic ZR gel grain) or a mix of drying agent and active carbon ▪ Drying agent capable in changing colour from Red to orange with increasing moisture ▪ Without dangerous substances according to EC Council directives 99/45/EC and 2001/60/EC ▪ Replaceable air filter element SGB ▪ Connection: Male BSP thread (ISO 228) on Stainless Steel tube ▪ Available with adaptor plate to simplify installation and to enable the use of a visual contamination indicator ▪ Adaptor plate ▪ Visual contamination indicator ▪ Drying agent refilling material ▪ Active carbon refilling material ▪ Replacement air filter element