Fall protection - Import export

Scope of delivery: 1x ball unit table 6x freely positionalable stop bar – long 4x freely positionalable stop bar – short 1x set of bolts anti-tilting Load capacity for tools, dies, injection moulding tools, assembly goods etc. up to: 500 kg – higher loads possible with ball units 022.100 Purposes Setup and dismantling, internal transport, flexible work table e.g. in toolmaking, can be used for forklift trucks, pallet trucks or pallet jacks Advantages Reduced set-up time, safe, flexible, universally applicable, simple and fast handling Safety at work flexible fall protection for conveyed goods, simple and quick tilt protection, stop bars freely positionable in the grid The SUTTY has a CE mark – Quality, made by Schulz!

M 63 D JDN Air Hoists M Series Carrying capacities: 1 t up to 6 t Air pressure: 4 bar Due to their multiple applications they are nowadays also deployed in most different industrial fields. Basically they have the same features as the hoists of the PROFI series but operate with an air pressure of 4 bar only. Two different control systems are at your disposal. Standard Features suitable for application in hazardous areas with danger of explosion (Explosion protection) two chain falls for alternate working specially suitable for horizontal pulling

Around installation technology, cable clamps for the fastening of HF cables to telecommunication masts are our speciality. These cable clamps consist of a C frame including retaining feet (for installation on to a C-profile or flat bar) and a fastening screw with grouted thrust washer. In addition, the corresponding number of cable trays (inlays) are supplied. C frame The C frames are stamped bent parts which – depending on their size – have lateral pieces to provide rigidity and stability. The fixing screws have a uniform hexagon head. Due to the construction and material selection, after tightening, a secure hold is ensured even without a lock nut. A torque of 1.5 Nm is recommended here. Installation to flat bars is possible up to a material thickness of 9.3 mm. Inlay The cable troughs are chamfered for side installation or simple setting into the C frame. The wide overlap protects against falling through before tightening the fastening screw.

• For holding and bending • With long flat jaws • Serrated inside jaws • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For gripping and bending • With long round jaws • Serrated inside jaws • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For cutting hard and soft wires • For holding, gripping, bending and cutting work • Cutting edges inductively hardened • With cutting edge and burner hole • With long, 45°-angled, flat-round jaws • Serrated inside jaws • Integrated ring spanner • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For holding and bending • With long flat jaws • Serrated inside jaws • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• Cutting edges inductively hardened • Precision cutting edge for piano wire (D2 quality) • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• American pattern • For holding, gripping, bending and cutting work • For cutting hard and soft wires • Cutting edges inductively hardened • With Nail- & wire holder • Gripping zones for flat and round materials • Asymmetric inside jaws for better grip on the workpiece • Integrated ring spanner • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• Pliers for electrical installation • With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • For cutting hard and soft wires • Cutting edges inductively hardened • Serrated inside jaws • Ergonomic angled head • Integrated ring spanner • With opening spring and catch • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • The ergonomic design of the pliers reduces work fatigue and also protects tendons and joints of the user • Made of tool steel, forged, oil-hardened

• Pliers for electrical installation • 4 Functions: cutting - stripping - crimping - bending • With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For cutting hard and soft wires • For holding, gripping, bending and cutting work • Cutting edges inductively hardened • With cutting edge and burner hole • With long, 45°-angled, flat-round jaws • Serrated inside jaws • Integrated ring spanner • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For cutting hard and soft wires • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Cutting edge hardness approx 62 HRC • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• American pattern • For holding, gripping, bending and cutting work • For cutting hard and soft wires • For shortening screws M 3.5 • Cutting edges inductively hardened • With Nail- & wire holder • Gripping zones for flat and round materials • Asymmetric inside jaws for better grip on the workpiece • Integrated ring spanner • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• Pliers for electrical installation • 4 Functions: cutting - stripping - crimping - bending • With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • For shortening screws M 3.5 • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• The indestructible water pump pliers, with safety box joint for highest stress • Double-toothed jaws • Cogs additionally induction hardened • Optimum jaw geometry with self-locking serration • Gripping capacity 40% above ISO by means of arch-shaped pitch adjustment • Ideal fulcrum, minimum effort • Finger trap protection for safe work, prevents injuries caused by squeezing • Box joint with wide guide surfaces • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of chrome vanadium steel, forged, oil-hardened

• For cutting hard and soft wires • With cable stripper function for all common cables ranging from Ø 8 mm to Ø 13 mm • For accurate, fast and safe stripping of all common round cables • Cutting edges inductively hardened • Precision cutting edge for the finest wires • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

This lightweight, twin connector (weighs less than 2 kg) consists of 2 matching carabiner hooks and provides uninterrupted rope-up protection. It is impossible to accidentally open up both hooks at the same time. This mobile solution can be used in industrial applications, scaffolding work, wind farms and other similar fields of activity. EN 355:2002 (energy absorbers) EN 362:2004 (carabiners) Ideal für temporary applications Permanently secured using 2 inter-communicating carabiner hooks Large hooks for pipes up to Ø 60 mm

Attach this roller glider, which is made of highly-durable aluminium material, permanently to a traversable, overhead lifeline system (8 or 6 mm). Thanks to its special ball bearing-mounted stainless steel rollers, this glider runs really smoothly along the cable and can also be used to go around curves (up to 180°). General national technical approval (German: "abZ"): Z-14.9-786 EN 795:2012, C Ideal for overhead usage Made of highly-durable aluminium material Extremely smooth-running stainless steel rollers Specially designed for lifeline systems (8 and 6 mm)

Our ABS Therm thermal protective cover (330 mm) can be used to insulate an anchorage point or support in a lifeline system. The cover can be shortened and is available in two diameters (16 and 42 mm - inner diameter). Add an ABS Signal signal rod to easily locate your anchorage device in snow cover. 330 mm high – can be individually shortened onsite Installed on top of your roof membrane Thermal cover: Outer diameter 70 mm – designed for anchorage points and lifeline systems (Ø16 mm) Thermal cover: Outer diameter 100 mm – designed for systems using a supporting tube (Ø 42 mm)

Use one of these collars to seal up an anchorage point with or without an additional supporting tube (Ø 16 und Ø 42 mm). This sealant collar is available in two finishes for use on a bitumen roof surface: Sanded or slated. The disc is 420 mm in diameter. We supply this collar with matching shrink tubing. Seal for bitumen roof surfaces Sanded or slated For Ø 16 mm and Ø 42 mm rods Shrink tubing included Disc diameter Ø 42 cm

Use this fall protection roller glider in lifeline systems and in temporary kernmantle cable lifeline solutions. Designed for kernmantle cables up to Ø 14 mm Suitable for use in a lifeline system (Ø 8 mm or Ø 6 mm) Detachable glider

This high-quality metal locker (650 x 400 x 350 mm) offers reliable protection for your PPE fall protection kit and is designed for wall mounting. There is a rod inside which allows you to hang your kit up. 2 keys are included in the package. For PPE storage 650 x 400 x 350 mm Incl. 2 keys