Results for
ALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA EPT 210 is a laminate and backfilling resin. Laminates can be produced with ALWA EPT 210 in order to manufacture glass fibre plastic parts, gauges, templates, moulds and applications with diverse fillers. ALWA EPT 210 is an epoxy resin that has a low viscosity and a light yellow colour. Under exothermic reaction, it cures in connection with the light yellow hardener H 10 at room temperature. The mixture shows a low viscosity and is particularly appropriate for laminating layers of up to 8 mm. For thicker laminates the application of layers must be interrupted several times in order to avoid too high reaction temperatures in the laminate.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA EPF 10 is a temperature-resistant, steel-filled gelcoat based on epoxy resin. It is used to produce temperature and abrasion resistant surfaces for vacuum, PU foam, thermionic moulds and heating plates, among others.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Multiple connectors for thermocouple and RTD circuits. Suitable for direct connection of up to 6 circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Corresponds with Standard Vertical Panel Type “PASV-(…)” and Sandard Multiple Jack Type “MJS-(…)”.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Multiple Jack for thermocouple and RTD circuits. Suitable for connecting up to 6 standard circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Incorporates a standard vertical panel, Type “PAV-(…)”.
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
The CSN® type RCVoltage Dividers consist of a proven reliable and high accuracy resistivecapacitive voltage divider. These are used for voltage measurement for control and protection systems in HVDC links and research institutes. The base for our Voltage Dividers are metal wire resistor webs that have been embedded in epoxy resin under vacuum. In this way, optimal protection against external influences can be achieved. Depending on the installation requirements (outdoor or indoor application), special designs of the voltage dividers adapted on the site requirements are used. The insulation medium (air, N2, SF6) can be easily adapted to the special requirements of the application. Our CSN® RCVoltage Dividers are characterized by
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
P.J. PRAUSE DUROTEC GMBH
Germany
S-Ply® is the registered name for composite leaf springs that are manufactured by Prause Durotec. The reinforcing material has a strictly parallel-oriented, non-interlaced glass or carbon fibre structure. The fibres are neither pre-stretched nor bent. In contrast to metallic materials with an isotropic structure, they are direction dependent and therefore can be aligned to suit the material structure. Epoxy resin compounds are used as binding agents. Their special balanced composition ensures high adhesion to the glass fibre surface, resulting in optimum dynamic and electrical properties. The ratio of matrix resin and reinforcement fibres has been chosen to profit from all of the benefits offered by the raw materials selected to form the composite material. The matrix fulfils a number of important tasks. It provides fixing for the fibre in the desired arrangement and supports it against buckling when under compressive stress. In addition, it has good load carrying and transmissio
Request for a quoteP.J. PRAUSE DUROTEC GMBH
Germany
S-Ply® is a glass-fibre composite material that is suitable for the highest dynamic requirements. The load carrying and supporting material is a strictly parallel-orientated, non-woven, glass- or carbon-fibre laminate (UD-prepregnated). The glass-fibres are not stretched and not bent. In contrast to metallic materials with an isotropic structure, they are direction dependent and therefore can be aligned to suit the material structure. Epoxy resin compounds are used as binding agents. Their special balanced composition ensures high adhesive to the glass fibre surface, resulting in optimum dynamic and electrical properties. The ratio of matrix resin and reinforcement fibres has been chosen to profit from all the benefits offered by the raw materials selected to form the composite material. The matrix fulfils a number of important tasks. It provides fixing for the fibre in the desired arrangement and supports it against buckling when under compressive stress. In addition, it has g
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Metal umbrella stand with perforation. Capacity: 28.5 litres. • Metal umbrella stand with epoxy resin coating • With decorative perforated strip • Ideal for entrance areas, offices, shops or the home • Capacity: 28.5 litres
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Lockable metal wall ashtray. Easy to attach and empty. Capacity: 4 litres. • Metal wall ashtray with epoxy resin coating • With removable inner container • Lockable container (including 2 keys) • Easy to empty and clean • Ideal solution for safe, efficient disposal of cigarette waste • Suitable for use in roofed outdoor areas • Easy wall-mounting • Capacity: 4 litres
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Round, steel waste basket with 30 mm wide perforation ring. Capacity: 15 litres. • Round waste paper basket • Capacity: 15 litres • Made from scratch-proof, epoxy resin-coated steel • With a 30 mm wide decorative ring of perforations • Suitable for use in offices, hotels and other prestigious spaces
Request for a quoteJOSEF JASPER GMBH & CO. KG
Germany
All products manufactured by us can be equipped with the appropriate corrosion protection according to your wishes and specifications. Epoxy resin coatings Hotspray coatings Hard and soft rubber linings KTL or powder coatings ECTFE/Halar SÄKAPHEN® coatings Pickling and passivation for stainlesssteel applications For drinking water systems, we can of course also provide coating products approved by KTW and DVGW w120
Request for a quoteResults for
Epoxy resin - Import exportNumber of results
12 ProductsCompany type