Environmental protection - Import export

With the new G 1910-02 and G 1910-20 CO₂ handheld measuring devices users benefit from a compact CO₂ monitor with integrated sensor and an optical and acoustic alarm function that has an impressively long rechargeable battery life, easy charging and a very wide measuring range.

Less wear, longer working lives In the automobile industry, environmental protection is also playing an ever greater role. With its dimensions, bodies form by far the largest part of recyclates in automobile recycling. One of the major challenges in crushing vehicle bodies is in the vulnerability to wear of many hammer axes. We have optimised our solutions over a number of years and supply hammer axes for large shredders in various diameters, which are characterised by extreme toughness and dimensional stability. This is how our clients profit from optimum working lives for their recycling machines.

The ideal sneeze guard for the counter area! Place this display in a bakery, canteen or bistro. In addition to the possibility of inserting three baking trays or trays measuring 400 x 600 mm, your products are perfectly protected from environmental influences in this display. The baking trays are inserted at a bevelled angle and thus presented at the optimum angle for your customers. Expand your fresh food counter by three additional levels. Create additional sales space for your baked goods and snacks. The two suction cups on the bottom of the sneeze guard promise a particularly secure hold. For cleaning the material we recommend warm soapy water and a soft microfibre cloth.

Double tube safety heat exchangers play an important role in applications where preventing media mixing in the event of a leak is paramount. They are widely used and accepted as standard in the chemical industry, power, heavy and light industry, oil & gas, marine, transportation, refrigeration and food & beverage sectors. Kelvion has a long track record in developing ground-breaking technologies always aiming to reach the highest levels of safety, environmental protection and cost-efficient operation. Our expert engineers are fully trained to provide you with the best-in-class solutions tailored to your specific requirements. As industries face ever stricter regulations for safeguarding requirements of environment and water supply, double tube safety heat exchangers are the technology of choice.

Data communication is also required in outdoor applications. Whether in traffic engineering, in maritime environments or mobile phone applications, long transmission distances and impacts such as heat, rain, snow, salty mist and dust place high demands on all connectors. The IP67 connectors developed by CONEC provide reliable protection against environmental influences and mechanical stress. The broad portfolio includes RJ45, USB/Mini USB and Fibre Optic LC Duplex connectors in plastic, metalized plastic or full metal.

Nominal volume: 10 L + with folding, zinc-plated, corrosion-protected steel wire carrying handle + resistant to frost, heat, UV radiation and chemicals + available in green and brown + integrated stacking ribs allow for stacking of the trash/garbage cans + the container’s smooth surfaces are easy to clean + environmental protection: Our pre- sorting containers can be fully recycled at the end of their useful life.

Nominal volume: 50 L + manufactured by compact injection moulding process in accordance with DIN 30713 + manufactured from specially developed, high molecular weight, high-density polyethylene (HDPE) + extremely rugged and durable material; resistant to frost, heat, UV radiation and chemicals + stackable, thus facilitating space-saving storage and transportation + quick and easy installation on posts, pillars, walls or grating + lockable with triangular key as standard feature + available in orange or green; additional colours upon request + all metal parts are zinc-plated and corrosion-resistant + environmental protection: the litter bins can be fully recycled at the end of their useful life

Scope of application Magnetic filter rod (magnetic rod) is mainly used to remove ferromagnetic impurities in powder, granular and liquid or slurry. It is widely used in ceramics, power, mining, plastics, chemical industry, rubber, pharmaceuticals, food, environmental protection, pigments, dyes, electronics, metallurgy and other industries. Working Principle The magnetic rod is made of high quality stainless steel pipe and high B value rare earth alloy NdFeB, and is made by special manufacturing method. The magnetic filter can be assembled on a fixed frame to form a magnetic filter. When the material containing iron passes through, it is attracted by the magnetic rod, and the material containing iron is firmly adsorbed on the wall of the magnetic rod. To ensure the integrity of equipment and product safety. Product features energyfree, pollutionfree, can be installed in any position on the production line with material contact, saving space, easy installation.

Force-of-gravity separators, which are used as pre-filters or for the separation of large quantities of dust and swarf. Cyclone separator Cyclones are force-of-gravity separators. The separation principle is based on centrifugal force, which is produced by the tangential injection of the raw air. Cyclones are used as pre-filters or for the separation of large quantities of dust and swarf. The degree of separation of a cyclone is not normally sufficient to meet the usual environmental protection requirements. The cyclone exhaust air must be post-filtered in most cases. Product description A cyclone essentially consists of three parts: the intake cylinder, the cone and the immersion tube. In the intake cylinder, the raw air is brought into a circular path by means of tangential injection. Due to the taper of the subsequent cone, the speed of rotation increases sharply, so that the particles are pressed by centrifugal force against the outer wall and decelerated by friction, causing them to drop out of the air stream and fall down. The cleaned air leaves the cone in an upward direction via the central immersion tube. Cyclones are usually welded sheet steel structures. Cellular wheel sluices or, in individual cases, double-gate sluices are used for the pressureless discharge of the material. In order to increase the cyclone effect, or the degree of separation, counter-spirals with a pipe connection can be placed on top of the immersion tube. Further options are, for example, wearing devices, explosion pressure relief devices, control flaps, level monitoring devices and manufacturing in stainless steel or galvanised sheet steel.

With high-quality filter tubes and PTFE diaphragms. Paint dust filters Wet painting also results in overspray. Overspray is the solid portion of the paint that is not taken up by the workpiece. According to the purpose of use, the overspray is moist and sticky immediately after release. It is captured by the exhaust air stream in the spray booth and fed to a filter. This can be, for example, a baffle plate filter, paper filter, fleece filter, glass fibre filter or also combinations of these. The adhesive effect causes the paint particles to adhere to the contact surfaces of the respective filter medium, as a result of which a good degree of separation is achieved. However, all these filters are storage filters, i.e. the filters clog up more and more during operation and cannot be regenerated. A filter exchange becomes necessary if the exhaust air rate of the spray booth falls below the minimum. This can be very time-consuming under certain circumstances and the work process must be interrupted in order to do it. To make things worse, not only must the filtered and bound paint residues be disposed of, but also the actual filter materials. Such tooling times are not justifiable for automatic, continuous or multi-layer painting processes. Continuous procedures such as automatically cleaned filters are likewise required for this. The humidity and the adhesiveness of the particles to be filtered are thereby the problem. In order to solve this problem, the paint particles should be relieved of their adhesive capability as far as possible whilst still inside the paint booth. Our patented ‘RTS-Rotation’ system is outstandingly well suited for this. The system is comprised of slowly rotating brush rollers, which take up the adhesive paint particles on the surface of the bristles and allow them to dry there. The bristles are automatically regenerated at pre-specified time intervals by combing devices that swing in at the rear of the brush rollers. The dislodged paint residues can then be removed and disposed of either manually during work breaks or automatically during operation. The degree of separation of this system is, however, insufficient to satisfy the environmental protection requirements concerning residual dust content in the exhaust air. A further filter stage is necessary for that. It must be assumed that the paint particles arriving here are to a certain extent still damp and sticky. For this we use special paint dust filters with high-quality filter tubes with PTFE diaphragms. If necessary, precoating agents (auxiliary dust) are used in order to neutralise the adhesive capability of the particles and to keep the dust layer on the filter elements permeable to air. The precoating agent is injected into the raw air pipe by means of special dosing units. The filter tubes are cleaned by means of compressed air impulse cleaning. The use of this technology requires special know-how. We have had the appropriate experience for almost ten years. The implemented plants have capacities ranging from 5,000 to 90,000 m³ /h. Because of the large number of different paint systems, individual experiments are usually necessary in our pilot plant in order to find the correct solution for the individual case.

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1460 x 1460 x 620 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -with raised platform -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 2650 x 1460 x 863 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 2650 x 1300 x 435 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 800 x 800 x 455 -Retention capacity in l: 222 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 410 -Retention capacity in l: 440 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 285 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -100 mm ground leeway -galvanized grid (load capacity 650 kg/m²) -conical construction -can be stacked -for use with a pallet truck or forklift truck -shipping unit: 15 units on a europallet -for flammable liquids of the GHS-categories 1-3 -for water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 800 x 360 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4