Results for
ACE STOSSDÄMPFER GMBH
Germany
Crane Installations Energy capacity 450 Nm/cycle Stroke max. 62 mm For even more protection: The profile dampers from the TC range of the ACE TUBUS-Series can also be used as safety dampers. These maintenance-free, ready-to-install damping elements made of co-polyester elastomer have been specially developed for use in crane systems and fulfil the international industry standards OSHA and CMAA. In the special TC-S design, managed to achieve the spring rate required for crane systems with the unique dual concept. Whether TC-S or TC, this range of models represents a cost-effective solution with high energy absorption for energy management systems. The very small and light design of Ø 64 mm to Ø 176 mm progressively covers energy absorption within a range of 450 Nm to 17,810 Nm.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Partial Rotation Angle, Adjustable Damping torque 2 - 10 Nm The damping direction of the adjustable FYT-H1 and FYT-H1 can be right, left or two-sided rotation. During each reverse movement of the unilateral decelerating versions there is a certain return damping torque that depends on the size. The brakes have a particularly robust zinc die-cast body and shafts made of steel. ACE rotary dampers are maintenance-free and ready-to-install.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Partial Rotation Angle, Adjustable Damping torque 2 - 10 Nm The damping direction of the adjustable FYT-H1 and FYT-H1 can be right, left or two-sided rotation. During each reverse movement of the unilateral decelerating versions there is a certain return damping torque that depends on the size. The brakes have a particularly robust zinc die-cast body and shafts made of steel. ACE rotary dampers are maintenance-free and ready-to-install.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Partial Rotation Angle, Adjustable Damping torque 2 - 10 Nm The damping direction of the adjustable FYT-H1 and FYT-H1 can be right, left or two-sided rotation. During each reverse movement of the unilateral decelerating versions there is a certain return damping torque that depends on the size. The brakes have a particularly robust zinc die-cast body and shafts made of steel. ACE rotary dampers are maintenance-free and ready-to-install.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Adjustable Compression Force max. 1,800 N Stroke 50 mm High quality and long service life: The HB model of hydraulic damper can also be used as single or double acting brake. Its coated body in a slim gas spring design and the piston rods with wear-resistant surface coating are features of high quality and long service life. The maintenance free, ready-to-install and closed systems provide a constant feed rate and are adjustable, and the control segment on the piston makes adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Adjustable Compression Force max. 800 N Stroke 25 mm High quality and long service life: The HB model of hydraulic damper can also be used as single or double acting brake. Its coated body in a slim gas spring design and the piston rods with wear-resistant surface coating are features of high quality and long service life. The maintenance free, ready-to-install and closed systems provide a constant feed rate and are adjustable, and the control segment on the piston makes adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Adjustable Compression Force max. 180 N Stroke 10 mm High quality and long service life: The HB model of hydraulic damper can also be used as single or double acting brake. Its coated body in a slim gas spring design and the piston rods with wear-resistant surface coating are features of high quality and long service life. The maintenance free, ready-to-install and closed systems provide a constant feed rate and are adjustable, and the control segment on the piston makes adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Adjustable, Without Free Travel Compression Force max. 40,000 N Stroke 111 mm Damping either in one or both directions: The HBS models of hydraulic dampers are made in a slim gas spring design and are compact and high in performance. Maintenance-free and ready-to-install they allow precise setting of retraction and extension speeds without any free travel when changing direction. These hydraulic dampers offer constant feeding rates and can be finely tuned via the screw adjustment. A control segment on the piston makes the adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Adjustable, Without Free Travel Compression Force max. 10,000 N Stroke 117 mm Damping either in one or both directions: The HBS models of hydraulic dampers are made in a slim gas spring design and are compact and high in performance. Maintenance-free and ready-to-install they allow precise setting of retraction and extension speeds without any free travel when changing direction. These hydraulic dampers offer constant feeding rates and can be finely tuned via the screw adjustment. A control segment on the piston makes the adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Adjustable, Without Free Travel Compression Force max. 3,000 N Stroke 62 mm Damping either in one or both directions: The HBS models of hydraulic dampers are made in a slim gas spring design and are compact and high in performance. Maintenance-free and ready-to-install they allow precise setting of retraction and extension speeds without any free travel when changing direction. These hydraulic dampers offer constant feeding rates and can be finely tuned via the screw adjustment. A control segment on the piston makes the adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Adjustable, Without Free Travel Compression Force max. 50,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Adjustable, Without Free Travel Compression Force max. 6,000 N Stroke 50 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Adjustable, Without Free Travel Compression Force max. 2,000 N Stroke 50 mm Can be regulated separately in any stroke position: The hydraulic dampers in the DVC-32 model are the first model to have the ability to have the in and out speeds adjusted independently from the outside and therefore more precisely. With their individual adjustment segments for the push and pull direction as well as the double-sided action, these are suitable as safety or control elements. The great number of mounting accessories makes assembly of these hydraulic dampers by ACE easier and allows these maintenance-free, ready-to-install and self-contained systems universally applicable. Qualitatively high grade, and at the same time simple to use; one of their uses is to absorb swinging loads.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Adjustable, Without Free Travel Compression Force max. 2,000 N Stroke 50 mm Can be regulated separately in any stroke position: The hydraulic dampers in the DVC-32 model are the first model to have the ability to have the in and out speeds adjusted independently from the outside and therefore more precisely. With their individual adjustment segments for the push and pull direction as well as the double-sided action, these are suitable as safety or control elements. The great number of mounting accessories makes assembly of these hydraulic dampers by ACE easier and allows these maintenance-free, ready-to-install and self-contained systems universally applicable. Qualitatively high grade, and at the same time simple to use; one of their uses is to absorb swinging loads.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Radial Damping, Heavy Duty Version Energy capacity 405 Nm/cycle Stroke max. 14 mm Impact and collision protection: The TR-HD profile dampers are stressed in the same way as the basic model TR but offer a higher force and energy absorption with a shorter damping distance thanks to the solid design. Different damping characteristic curves can be achieved with two different co-polyester elastomer hardness levels. The slightly oval (bi-concave) shape also ensures a softer force intake. This series absorbs a lot of energy despite the low height: a range of 405 Nm to 11,840 Nm is progressively covered by strokes of 12 mm to 44 mm. With two screws, included in the delivery, the damper can be easily and quickly fixed both horizontally or vertically. The drill hole distance is adapted if required.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Radial Damping, Long Version Energy capacity 7.2 Nm/cycle Stroke max. 17 mm Especially for applications with long and soft deceleration: The radial tube dampers TR-L from the ACE TUBUS-Series are maintenance-free, ready-to-install elements made of co-polyester elastomer. Their radial load offers designers a very long and soft deceleration with a progressive reduction in energy at the end of the stroke. The TR-L-Series has been specially developed for a maximum stroke with a minimum height and a range of 7.2 Nm to 10,780 Nm. The absorption capacity is dependent on the length of the selected tube damper. These models are available in sizes between Ø 29 mm and Ø 188 mm.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Radial Damping, Hard Version Energy capacity 2.7 Nm/cycle Stroke max. 15 mm Harder mixture of materials for higher energy absorption: The maintenance-free and ready-to-install TR-H-Series profile dampers, are stressed radially in the same way as the basic TR model. With almost the same dimensions, they also decelerate with a very long and soft action. The harder co-polyester elastomer mixture leads to significantly high energy absorption of 2.7 Nm to 427 Nm in these models. Easy to mount due to the supplied special screw. The TR-H-Series is space-saving with dimensions of Ø 30 mm to Ø 102 mm. It complements the TUBUS range between the progressive TR and almost linear TS models. Users are therefore provided with a full range of deceleration curves within the ACE TUBUS family.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ACE STOSSDÄMPFER GMBH
Germany
Adjustable, Without Free Travel Compression Force max. 10,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.
Request for a quoteSIEMPELKAMP MASCHINENFABRIK GMBH
Germany
Ventapp dampers are used for controlling hot, ue and process gases in various industrial branches often in connection with VENTAPP industrial fans.Process optimisation and consistency, increased energy eciency - VENTAPP oers a wide range of high-quality industrial dampers and air intakecontrollers designed even for the most extreme boundary conditions. Ampleaccessories like monitoring equipment, special switches, add-on sets and closing devices ensure adequate adjustment to the production process. FeaturesSingle or multi-vane control dampers for controlling stable processes Safety dampers with self-triggering counterweights to respond toemergencies and ensure safe maintenanceControl and non-return valves with heatable seal air to prevent overpressure and corrosionAir intake controls for energy ecient blower controlAdvantagesCustomer-specic manufactureRobust designHigh ependability and operational safety Diverse accessoriesMaintenance and repair servicesquare up to 3,000 x 8,000 mm
Request for a quoteRG + SCHWINGUNGSTECHNIK GMBH
Germany
Depending on type, multi-directional dampers can be loaded in every axis. In our standard vibration dampers of the GDZ series two all-metal cushions are installed. Depending on the assembly, these cushions are load with pressure or tension. Vibration dampers of the series 7 have another cushion obstructed which allows them to absorb load in horizontal direction additionally. Because of this, GDZ dampers are perfectly suitable for applications in the fields of plant engineering and rail vehicle construction. Our product range includes three different types of these multi-directional dampers: GDZ series 1 for a fixation with bolts for pressure and tension load GDZ series 5 for a welding fixation for pressure and tension load GDZ series 7 for a fixation with bolts for pressure, tension and horizontal load
Request for a quoteRG + SCHWINGUNGSTECHNIK GMBH
Germany
Vibration damper of the series GMF are especially designed for machine tools. The elements GMF-( )-4 are made to mount small presses or cutters. Depending on the size of the elements they have a load range between 250 and 10.000 kg. Vibration damper of the series GST have an own levelling integrated, so they can compensate small unevenness on the floor. Our product range includes three different types of machine feet: GMF-( ) as a vibration damper especially for machine tools GMF-( )-4 as a vibration damper especially for small presses GST-( ) as a vibration damper with integrated levelling
Request for a quoteRG + SCHWINGUNGSTECHNIK GMBH
Germany
Damping cushions made of stainless steel are knitted and pressed in a special process. Depending on size, density and design it can be loaded in a range between 5 and 20.000 kg. It can be pressed in cylindrical or rectangular shape. Versions with bunches and steps are available. Standard materials are 1.4301 and 1.4404. Additional materials and special designs are on demand. RG+ offers the following damping cushions as standard elements: GKK as a vibration damper in cylindrical form GKR as a vibration damper in rectangular form GKB as a vibration damper with a bunch
Request for a quoteACI INDUSTRIEARMATUREN GMBH
Germany
Rectangular damper type RENA Use: We designed RENA as a single- or multi-vane system. Unless you specify otherwise, they are produced in accordance with the DIN 24193 standard. RENA’s multi-vane system provides better control characteristics and it can be ordered in either a synchronous or asynchronous version. Upon request we can also outfit RENA with a refractory lining made of concrete or mineral wool. The „sealing air“ model is 100% leak-free and therefore completely air tight. As with all our valves, RENA is very robust, low in maintenance and safe. Even under extreme conditions, RENA offers a long service life, very low probability of failure and great reliability.
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
The impact elements consist of three components that are connected to one another by hot vulcanization A special rubber compound with a hardness of 62 ° Shore A, which absorbs the falling energy A top layer made of high sliding UHMWPE and a thickness of 10 mm A vulcanized aluminum profile for easy installation of the beams Special bolts with M16x40 also available in M12
Request for a quoteResults for
Damper - Import exportNumber of results
25 ProductsCompany type