Cutting machines - Import export

There are many good reasons to separate tubes chiplessly. And first of all, of course, the cleanliness. Precision and output, too, are not insignificant. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can be formed immediately afterwards. That saves time and money. Technical specifications: Separation efficiency: max. Ø 80 x 3 mm Shortest separation length: - 70 mm (without pull apart) - 100 mm (with pull apart) Cycle time: 5-10 sec. (depending on material, diameter, wall thickness and cutting length)

Clean, efficient, versatile. transfluid's knife cutting method is ideal for postbending cuts. Even with extreme geometries it is possible to have perpendicular cuts with sharp edges. In both cases both chips can easily be detected in the process. Extreme requirements are also not a problem, as up to two blades can be used. An internal mandrel can also optimise the process.

Created for precision. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can then be directly processed further and for instance be formed straight afterwards. That saves time and money.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

There are many good reasons to separate tubes chiplessly. And first of all, of course, the cleanliness. Precision and output, too, are not insignificant. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can be formed immediately afterwards. That saves time and money. Technical specifications: Separation efficiency: max. Ø 105 x 3 mm Shortest separation length: - 100 mm (without pull apart) - 170 mm (with pull apart) Cycle time: 5-10 sec. (depending on material, diameter, wall thickness and cutting length)

There are many good reasons to separate tubes chiplessly. And first of all, of course, the cleanliness. Precision and output, too, are not insignificant. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can be formed immediately afterwards. That saves time and money. Technical specifications: Separation efficiency: max. Ø 28 x 2 mm for stainless steel tubes Shortest separation length: — 25 mm (without pull apart) — 55 mm (with pull apart) Separation efficiency: up to 2,000 pcs per hour

There are many good reasons to separate tubes chiplessly. And first of all, of course, the cleanliness. Precision and output, too, are not insignificant. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can be formed immediately afterwards. That saves time and money. Technical specifications: Separation efficiency: max. Ø 50,8 x 2,5 mm Shortest separation length: - 25 mm (without pull apart) - 55 mm (with pull apart) Separation efficiency: up to 2,000 pcs per hour

Laser cutting parts and bending parts: Your special production in good hands. As part of the Schulz Group, Schulz Stanztechnik can also offer you – as a service and in addition to the stamping program – special laser cut parts in various materials and thicknesses. In accordance with your drawings, you will receive a meaningful offer from us within three working days, and your laser parts within ten working days of your order. Manufacture of 2D and 3D laser parts made of the most diverse of materials as well as angles in accordance with your drawings and specifications.

Stainless steel system for cleanroom production with 400 W laser system Positioning the laser head using a 3-axis servo system Stainless steel lifting door with inspection window.

Removal of determined locking ring class (double removal) with control measurement and transfer to assembly station Locking ring assembly and testing (cycle time approx. 30 sec.)

Pressing bearings Manually assemble anti-knock on hand lever press Automatically assemble and test retaining ring

Axial bearing 1000 N press, locking ring assembly and testing station

Stainless steel system for cleanroom production with 400 W laser system Positioning the laser head using a 3-axis servo system Stainless steel lifting door with inspection window

Differential assembly with torque and angle monitoring Positioning the 5 screwing units to screw in 2 x 5 screws in succession

Test OK or NOK. Locking ring assembly over envelope circle

Handling the friction and steel discs into the measuring system from storage 360° laser measurement of the thickness of friction and steel discs Stacking discs with the respective high points offset to each other Measuring the disc pack for stacking height (pack class) and plane parallelism

Fast cycling assembly machine 10 stations with O-ring assembly. Cycle time 1.7 sec.

Measuring groove widths for selecting locking ring classes

Measuring machine for determining discs axial gearing DL501

Measuring machine for determining discs double clutch DQ381

Ideal for trimming or scoring foils and skins Blade cutting is a very fast, precise and clean process. In the automotive industry, it is particularly well suited for kiss cutting, edge cutting and for cutting notches in foils and leather skins to prepare for edge folding processes. A special form of blade cutting is scoring, i.e. the intentional weakening of leather, plastic foils and form skins to create specific tear lines, such as to allow the release of airbags. Ultrasonic cutting technology allows for even more possibilities in die and kiss cutting for foamed components with appropriate material combinations. This technology allows parts to be cut dust and chip free with a very low noise level.

The STAUFF Press Assembly Machine SPR-PRC-POC allows the pressure/position-controlled pre-assembly and final assembly of cutting rings from the Extra-Light Series (LL), the Light Series (L) and the Heavy Series (S) according to ISO 8434-1 / DIN 2353 on tube ends with outer diameters between 4 mm and 42 mm. The machine is designed as a robust table-top device for continuous operation in the workshop. It is used in connection with hardened and wear-resistant assembly studs FI-FMK and support plates FI-GP which are specially designed for the machine-assisted assembly. The combined pressure/position-control of the device allows wear on the assembly tools to be detected in time before it can have a negative influence on the assembly result. Maximum service life of the tools is achieved through careful handling of the components and practical operation of the assembly machine. Other factors are proper storage (protected against contamination and corrosion), regular cleaning and...

With the battery-operated STAUFF Press Assembly Machine SPR-PRC-H-M, STAUFF provides an ergonomically designed, light-weight and at the same time robust device for the assembly of cutting rings in the Light Series (L) as well as in the Heavy Series (S) according to ISO 8434-1 / DIN 2353 on metric tube ends with outer diameters from 6 mm to 42 mm. The machine has been designed for hand-held, tripod- or table-mounted operation and offers the best technical compromise between maximum flexibility, economic efficiency and a high level of process reliability with considerable reduction of time and cost for the assembly of cutting ring fittings. Short tool change and setup times (with only a few seconds required to manually adjust the assembly pressure) make it possible to carry out the assembly of medium and even small quantities of cutting ring fittings, e.g. during maintenance, servicing, conversion and repair works on hydraulic pipe and tube systems. With the rechargeable battery...

We can do heavy Whether production, assembly or the logistics that follow - we can do heavy. Our infrastructure enables us to process and handle heavy components of up to 400 t. Key features Forklift trucks up to 20 t Heavy duty trailer up to 180 t Crane systems up to 400 t Hall gates up to 10 m x 10 m Permanent transport permit for heavy transports to the port of Krefeld DB siding Advantages bundled overall responsibility Handling of large components broad-based logistics infrastructure personal contacts