Connected pipes - Import export

The parts used in connecting pipe.

Stainless steel flanges are a crucial component in various piping systems, providing ease of assembly and strength in connecting pipes, valves, pumps, and other equipment. They serve as a plate for covering or closing the end of a pipe and are commonly used in plumbing, oil and gas, petrochemical, and food industries due to their durability and corrosion resistance. Types and Specifications Stainless steel flanges come in several types to suit different applications: Weld Neck Flanges: Designed to be welded to the pipe. Suitable for high-pressure applications. Slip-On Flanges: Easily slide over the pipe and are welded in place. Socket Weld Flanges: Used for smaller, high-pressure piping. Threaded Flanges: Attached without welding, ideal for low-pressure applications or pipes with a thin wall. Blind Flanges: Used to seal the end of piping systems or pressure vessel openings. Lap Joint Flanges: Used with stub end fittings for applications requiring frequent dismantling.

The MBS hydraulic cylinder MZR-1008 is designed as a discharge cylinder of direct support systems on mobile devices, such as Cranes have been constructed. The integrated position measuring system enables the exact position of the support cylinder to be detected. This is hydraulically fixed in connection with the piped double check valve. The cylinder connection is via plain bearing bushes. There are connecting bores for pipe fittings according to BSPP ISO1179-2 in the valve block. Hub and piston rod overhang are variably selectable. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for...

MBS hydraulic cylinders of the MZR-1006 series are block-type differential cylinders for use in mold, tool and jig construction. The cylinder connection is very variable due to various mounting holes on the housing and piston rod. Connections with connection holes are available for pipe connections to BSPP ISO 1179-2. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of the types H, HL and HLP according to DIN 51525-1. If you have any questions about areas of application or other options, we are happy to answer them. Download the data sheet for detailed information

The MBS hydraulic cylinders of the MZR-1007 series are synchronized cylinders with pivot pins for robust, high-frequency use in general mechanical engineering. The cylinder is connected via a pivot pin ring, which can be variably screwed to the cylinder tube, and a threaded neck on the piston rod, which is designed for rod ends according to DIN24338 / ISO6982. There are also connection bores for pipe connections according to BSPP ISO 1179-2. Hub and piston rod overhang are variably selectable. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for detailed information

The MBS hydraulic cylinders of the MZR-1002 series are direct support cylinders for vehicle construction. A robust cylinder connection is made possible by welding blocks. The support plates are ± 15 ° swivel. The cylinder connections have threaded holes for pipe connections according to BSPP ISO 1179-2. Hub and piston rod overhang are variably selectable. Control of the cylinders is possible on both sides via integrated hydraulically operated check valves in plate construction. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for detailed information:

Quick click-shut coupling (QuickLock) without threads, no lubrication or elaborate screwing required Fast rod insertion and removal Approximately 40 % quicker installation than screwed rods Absolute stable connection Works around offset pipe bends and joints Minimal deformations Made from one piece of steel Rigid, low wear, as no clamping jaws required No slipping back of the bursting rods due to elastic pulling forces Bursting rod system with practical bursting rod accessories

Numerous designs available at short notice Branch connections on straight pipe sections Lateral outlets are used for 45 ° branches on straight pipe sections. Other departure angles are possible on request. Standards and special requests We deliver lateral outlets in two pressure levels (3,000 lbs and 6,000 lbs) and in all common materials. If required, we can also supply special materials. Technical specifications You can find more details, technical data and dimensions in our data sheet “Lateral outlets” in the download area. We will be happy to provide you with information on special dimensions and custom-made products on request.

KB Schmiedetechnik manufactures forgings in Germany, made of European quality steel and special alloys. Drop forgings of stainless steel: corrosion-resistant, non-embrittling, seawater-suitable Drop forgings according to Pressure Equipment Directive PED 2014/68/EU, AD 2000-W0, KTA, EDF/Areva/RCC-M Boiler parts for boiler systems and vessels from former Alstom, Babcock/Borsig, CNIM, Mitsubishi/Hitachi (MHPS) and more. Keywords: Valves, valve parts, valve bodies, high-pressure valves, hydraulic valves, nuclear valves, safety valves, pipe flanges, boiler construction, pipeline construction, Y-pipes, forged pipe angles, fittings, fittings, fork pieces, pipe connections, Y-pieces, T-pieces, L-pieces, forged fittings Details: KB Schmiedetechnik, a drop forge in Western Germany, is manufacturing forgings for the construction of boiler systems including tube connections for piping like fittings, flanges and complex manifolds, offshore, marine, shipbuilding

Quick suctioning immersion pumps series SFL equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions) with heavy chip loads as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SFL serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2500 l/min Delivery head: up to 46 m Please contact us for delivery quantity

Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The STL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 200 l/min Delivery head: up to 80 m Please contact us for delivery quantity

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The maximum coolant level must stay a few mm/inches below the mounting flange. The STA serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 5000 l/min Delivery head: up to 120 m Please contact us for delivery quantity

Quick Suctioning Immersion Pumpsseries TGL/SGL equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (grinding oils) as they occur in high-speed grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SGL serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2600 l/min Delivery head: up to 88 m Please contact us for delivery quantity

Suction immersion pumps series TAS/STS make it possible to connect to vacuum filters through their simple connection on the suction side (for instance, with a slot screen). Suction immersion pumps without seals are positioned in the area of unfiltered coolant in the tank. With their robust design, they allow operating pressures of - 0.3 bar to - 0.5 bar on the suction side. Volumetric delivery: up to 1200 l/min Delivery head: up to 60 m The STS serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Please contact us for delivery quantity

Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SAL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2600 l/min Delivery head: up to 115 m Please contact us for delivery quantity

Cutter Pumps The cutter pumps of the series SPC are desinged to handle and reliably cut long, stringy plastic chips. Because of the higher number of cutting blades which results in an increased cutting frequency all chips are being consistenly cut in small pieces. The SPC pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. Volumetric delivery: up to 800 l/min Delivery head: up to 18 m Please contact us for delivery quantity.

Free Flow-Immersion Pumps series SFT are designed to lift coolant for filtering. Coarse shreds can be transported together with liquids. The SFT serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Impellers: semi-open Fluids: coolants, emulsions, oils Volumetric delivery: up to 2350 l/min Delivery head: up to 28 m Examples of applications: — Water based coolant and chips — Pump back system — Pump back for various chip materials Please contact us for delivery quantity

Flow Sight Glass Type Type N880-SOW with pipe – socket – weld connection Use: The flow indicators are used for optical control of fluids and gases, for horizontal and vertical pipe-lines. Also available with internal spinner or flap.

Customer specific and automatic Filling Stations for several industries and gases. Highlights Highly specialized systems with low overall costs One stop station for all necessary handling Individual solutions on demand 24/7 Back-up support available General capacity: 1000 CO 2 cylinders/hour Filling Options Valve set (fill and relieve) Valve connection Hoses, connections, pipes Weighing Terminals Various digital terminals SysTec IT 1000 / IT 3000/ IT 8000 industrial weighing terminal Connection as second scale to other filling units Optional printer and communication interfaces Automatic tare setting Automatic shut-off at target weight

Split pipes made of PVC-U with H-profile For subsequent protection of cables, which have already been laid, or for repairing damaged pipe systems. - Sealed against fine sand - Reusable - No sleeve required - Extendable to any length - The joining of the split pipes does noch require any tools - A continuous pipeline is achieved by offsetting the top split pipe (no sleeves required) The joining is achieved by connecting the two split pipes. The connection battens (H-profile) are glued on one side. A continuous pipeline is achieved by offsetting the top split pipe (no sleeves required). In addition, the H-profiles can be joined to the split pipes during the final assembly using Tangit plastic glue for PVC-U. Standard design: Material: PVC-U Locking system: H-profile Colour: black Length: 3 m

We stock PE plates, PE pipes as well as custom made products HDPE plates in natural, PE 300, PE 500, PE 1000, in strengths from 2 mm etc PE pipes, pipe connections, PE pipe bends in different dimensions Custom made plastic vessels in accordance with drawing or pattern

Preconfigured installation box (SANHA®-Box 25-BWDU-M) from foam for masonry construction, with bath and shower connections, multilayer pipe and fittings already installed inside. Saves time (up to 70 % less), insulates sound and prevents humidity.

Fully preconfigured SANHA installation box for dry-wall construction, with two wash basin connections. With sound insulation and condensate protection. One female threads Rp 1/2", one multilayer pipe connections 16 mm. 270 x 350 x 70 mm (length x width w/o plate/width with plate x depth).

Sink installation box for Masonry, with thermally insulated and condensed water Insulating body, with plasterable Surface, with 2 internal threads Rp 1/2 and 2 MultiFit-Flex System pipe connections 16 mm and drain connection 50 mm, Dimension * 270x160x70 mm

Washing machine assembly box for masonry, with thermally insulated and condensation-proof body, with plasterable surface, with 1 internal thread Rp 1/2 and 1 MultiFit-Flex system pipe connection 16 mm and drain connection 50 mm, dimension 270 x 200 x 70 mm

Practical, time-saving foam installation box with preconfigured multilayer pipe and fittings / connections for radiators. For masonry walls. Distance between flow and return flow 50 mm, with thermal and sound insulation as well as condensate protection. 2 MultiFit-Flex multilayer pipe connections dimension 16 mm. Box dimension: 120 x 95 x 50 mm (length x width w/o plate/width with plate x depth)

Washing machine installation box with through-flow circulation pipes for drywall construction, with thermally insulated and condensate-proof insulating body, with 1 internal thread Rp 1/2 and 2 MultiFit-Flex system pipe connections 16 mm and drain connection 50 mm 50 mm, dimensions 270 x 350/430 x 70 mm

Pre-configured foam insulated installation box 25-WL-WT-T for wash basins, for use in dry wall constructions. The box provides thermal insulation and condensate protection through its foam body. With two female threads Rp 1/2 and two MultiFit®-Flex (multilayer pipe) system pipe connections 16 mm as well as drainage connection 50 mm. Overall dimension: 200 x 350 / 40 x 70 mm (Length x width w/o plate/width with plate x depth).

SANHA prefab installation box for cold water meter installation in masonry construction, with thermal and sound insulation, condensate protection. Foam body with multilayer pipes and fitting connections inside. 1 water meter base unit and 1 straight cutoff valve, 2 female threaded ends Rp 3/4, 240 x 350 x 70 mm