Cleaning time - Import export

AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.

AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.

AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.

Clean breathing air the best basis for effective health prophylaxis:The TAC V+ and its model variants guarantee clean, healthier room air wherever it is needed – for mobile or stationary infection control with scientifically proven effectiveness! 99 % of all infections occur indoors. Also in the future, even in post-COVID-19 times. Clean, unpolluted breathing air is therefore essential for a good room climate and elementary health preservation. This is where the high-performance air purifiers of the TAC series offer you, your employees, customers, clients, patients and pupils a high level of protection against indirect infections by aerosol particles. The high-performance air purifier series around the TAC V+ was developed specifically for this purpose. In addition to viruses and bacteria, the TAC V+ also reliably filters respirable and harmful particulate matter (e.g. caused by road traffic) as well as pollen from the room air.

Our Surface Cleaner 3000 air is an extremely powerful high pressure cleaner. It is capable of cleaning at pressures of up to 3,000 bar. To make it even more efficient and smooth in operation, we have fitted it with pneumatically driven rotating nozzles. This ensures an even cleaning process at all times. A common application for our hp floor cleaner is the removal of rubber residue from airport runways. All our surface cleaners can be fitted with a vacuum. This ensures a trouble-free and dirt-free working environment, improves visibility and workplace safety and reduces the impact of the process on the environment.

Spray walls and spray booths with dry separation via pre-filters and fine filters. Spray walls and spray booths with dry separation For lower utilisation times or overspray quantities, spraying systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular spraying system type RTS enables individual adaptation to the respective case of need. Function The overspray is caught by the exhaust air stream and fed to the filter. The solids are filtered out here, while the cleaned exhaust air is blown out into the open air by the fan. Versions The entire spray wall and the drip tray are made of galvanised sheet steel. The basic version consists of a wall with a two-fold filter stage. The attached radial fan is equipped with spark protection in the suction nozzle as well as an explosion-proof motor. The first filter stage is formed by a paper filter or a baffle plate filter, consisting of two rows of galvanised sheet metal lamellae arranged one behind the other. A glass fibre fine filter arranged directly behind it represents the second filter stage. The spray wall can additionally be equipped with removable or fixed side and ceiling panels. Each version is also available with floor suction pan, available with an integrated 2-stage filter and grating cover. Accessories In addition, the spray wall can be equipped with various accessories from the Rippert product range, such as explosion-proof lights, energy-saving flaps, turntables, etc. We recommend the installation of a supply air system for the replacement of the exhausted air. Cleaning / maintenance The spray wall is designed such that the filter elements can be exchanged with little effort in a very short time. For faster cleaning, baffle plate filters should by sprayed with a release agent (e.g. strippable varnish) before being put into operation. Underfloor paint mist extraction With dry separation, consisting of a support structure with attached paper filter, grating cover and a suction duct with air quantity adjustment.

MIXACO Heating/Cooling Mixer MIXACO’s combined heating/cooling mixers are the optimum solution for complex mixing challenges. The systems are characterized by their outstanding product preparation in the heating phase and high-efficiency cooling performance. The horizontal and vertical heating/cooling mixers are designed for high-volume throughput, rapid processing and short cleaning times. The Relaunch of a Classic Tried and Tested Technology With New Product Concept and Attractive Price-Performance Ratio The consistent development of tried and tested technology is a MIXACO hallmark, which also applies to our heating/cooling mixers. The product line has been completely redesigned following comprehensive analyses of all components. In addition, our range of international maintenance and support services are optimized continually and are under continuous review.

MIXACO Container Mixer i4MIXACO has been an innovation leader in the mixing industry for years. With the innovative container mixer i4 we are going one step further into the future. Outstanding mixing flexibility, high quality and reduced cleaning effort to a minimum are its outstanding features. Equipped with the new MIXACO Control Center (MCC) we set a new milestone for highly efficient mixing plants. All advantages at a glance * Flat mixing head * Optimized suction * Dust protected machine components * injection through mixer shaft * different container sizes on one mixer * Reduction of cleaning times * Lifting device with container positioning * High flexibility * New tools for more efficient mixing * Lower energy consumption * No base plate

The All-In-One Mixer The basic principle of the MIXACO sack and drum mixer Speedy™ is the mixing of small batches directly in sacks or drums. Specially developed dead-space free mixing sacks with a capacity of 50 or 100 liters are available for powder and granulates. Volumes of up to 200 liters can be mixed in drums. Besides powders and granulates, liquids can also be mixed. The MIXACO Speedy™ is the ideal solution in terms of internal logistics: the product is weighed, mixed, moved and stored in the same sack or drum. All Benefits at a Glance • Only one container required for weighing, mixing, conveying and packaging the product • No refilling or transferring required • Short tool cleaning times • Highly flexible • Many combinations of tools and motors possible for a wide variety of mixing applications • Low energy consumption

The MIXACO container mixer Multitool™ is ideal for the careful mixing of temperature-sensitive materials. An innovative mixing concept with new tools and a special process enables mixing without temperature increase. The MIXACO Multitool™ is a container mixer with numerous benefits for internal logistics and production workflows, as it can be seamlessly integrated in work processes. All Benefits at a Glance * Minimal product heating * Optimum homogenization * Adjustable comminution rate * No fusion or adhesion of material * Reduced cleaning time * User-friendly, ergonomically optimized cleaning in preconfigured cleaning position * Material transport in mixing container for greater logistical efficiency * High flexibility * Wide range of tool and motor combinations enable use in many different mixing tasks * Low energy consumption

Individuality and problem-solving are our strengths The PERKUTE system offers solution for every requirement in industrial cleaning technology. Many special solutions could be developed because of the wide product range. We have compiled some reference examples of already implemented special solutions. Special Solutions/ application examples Conveyor machine TW 103 with handling equipment "For cleaning closing thrustor in time of the machine center" Conveyor machine TW 108 with return transport passage "Cleaning of synthetic material boxes" Dip facility TL - 70T "Cleaning of valve cases" Conveyor machine TW 101 with feed system and delivery "Cleaning of hollows" Spraying cleaning facility FR-130H "Cleaning of goods carrier" Spraying cleaning facility FR-90H "Cleaning of store cages in bulk baskets" Spraying cleaning facility RC 82 "Cleaning of drawing dies with with 100 bar"

PolyPlus® LD 1925 ZZ is a versatile, stabilized, and extremely effective purge compound on an LDPE basis specially developed to reduce the cleaning times of extrusion and injection molding plants to a minimum. It should be used before dismantling and cleaning the extruder, during planned and unforeseen extruder downtimes and during material and colour changes. PolyPlus® LD 1925 ZZ contains surfactants and abrasive agents with mechanical and chemical cleaning properties to remove degraded polymer and pigments from the extruder and from the die. The use of PolyPlus® LD 1925 ZZ immediately before the cleaning process has shown that downtimes can be reduced my more than 50%! This also applies for product and/or colour changes.

New generation swarf conveyor for reduced maintenance and a maximum of availability of the machine tool The included screen boxes can be cleaned in a short time.

Exceptional working characteristics Suitable for the repair of conveyor belts, rubber coatings and linings, as well as for joint seals Two component polyurethane cartridge system Short working and application times Fast, clean and flexible Dry to the touch after 2 minutes Can be ground back and finished after 30 minutes No volatile components Break , impact and abrasion resistant Max. hardness of 60 Shore A Manual application or using a spray system

The new FINE-LINE series of HAVER NIAGARA GmbH is the innovative answer to complexities that users face when it comes to dry fine particle screening. Areas of application Fine screening of: Industrial minerals (quartz, limestone) Raw materials and products in the building materials industry (quartz and limestone granulate, gypsum, dolomite) Raw materials and products in the chemical industry (inorganic fertilizer, e.g. DAP) Cut sizes from 100 μm to 3 mm Applications Classifying Reject Defillering Advantages Quick and easy exchange of screen cloth Dust-tight screen box down to 80 μm Minimal energy consumption, less than 0.5 kWh/tonne of input material Integrated material distribution unit Feeder Screen cloth Longitudinally tensioned screen cloth. Cleaning with up to 80 Hz (4800 rpm). With multiple screen decks, the above-each-other deck sections can be cleaned simultaneously or in a time-shifted manner. Cleaning duration and number of cleaning cycles are freely...