Cartridge - Import export

Aluminum cartridges protect the sealing compound with a diaphragm and seamed lid to prevent leakage, ensuring a long shelf life and preventing the contents from drying out. The two-component integrated system is suitable for fast-curing fillings and easily used with existing guns on the market while offering a variety of static mixer nozzles. Cartridges can be printed with customized art in up to six colors and have lacquer applied to the inside surfaces. Products include cartridges and a two-component integrated system.

Occasionally also these terms are used for cartridge heates: heating cartridge, insertion heaters, spiral cartridge heaters. As a rule cartridge heaters consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention. There is a heating wire inside which is wound onto a ceramic core. The number of coils varies depending on the power. In order to avoid a short-circuit, the cartridge heater is filled with magnesium oxide and compressed afterwards. Highly compacted they reach a surface watt density of up to 50 W/cm² and withstand highest stress. In the plastics industry cartridge heaters are used in hot runners in order to temper thermoplasts during injection moulding processes. Other areas of applications for process heat are e. g. packaging, diecasting or continuous casting in which zinc or aluminium are processed. Further applications are to be found in mechanical as well as medical and laboratory engineering.

for cartridge with safety valve, see Usbeck article 1430

Square cartridge heaters are used where much power has to be installed near the surface of a tool, e.g. in cutting knives, sealing stations or hot plates. With a soft, malleable condition in stainless steel or nickel sheath square cartridge heaters can easily be pressed into common milled rectangular grooves. Apart from the advantageous heat transfer over ¾ of the sheath, it is not necessary to cement or cast in the heater which is imperative for round cartridge heaters. Unlike tubular heaters which are also available in square sections (see chapter Flexible Heating Pipes), the square cartridge heaters have the termination on one side and can be loaded with 16W/cm² (2.5W/in²) due to their special inside construction.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

CSN® Explosionproof flange heaters are used for heating of various gases and liquids in hazardous areas. The devices are manufactured in various designs. As heating elements cartridge type or tubular heating elements are used depending on applications. Further information about our CSN® ExFlange heaters

High performance cartridges and heating elements are excellently suited to direct heating of all kinds of tools. Area, ring and barrel heaters are suitable for heating boilers and moulds, tools, die plates, machine parts and a range of other purposes. They can be manufactured individually to size, voltage and output specifically for your application. High performance cartridges are suitable for tool heating in the many different fields in which a specific compatible operating temperature is required. High performance cartridges are essential in the thermal machining process field. High surface loadings facilitate a correspondingly high performance in a small installation area, at operating temperatures of up to 750°C at the heating cartridge jacket. We produce diameters between 6 mm and 45 mm to order. Different types of feed also allow high performance cartridges to be matched to the relevant installation situation.

CSN ® Explosion proof cartridge heaters as direct heaters for liquids or gases in hazardous environment. These units are equipped with a heating bundle or a replaceable ceramic heating element. For temperature control these heaters are available with an integrated temperature monitoring system. These devices are available in various material grades. The electric cartridge heating element type 93./..EEx….T.(.) is designed for the heating of liquids in the zone 1 and zone 2. The standars elements, mentioned in this list are suitable for DGRL (code 2014/68/EU) Art. 4, Para. 3. The elements can be suited (on request) to other uses requiring another classification according to DGRL Further information about our CSN® ExCartridge Heater

CSN®cartridge type heating elements and bath heaters are eminently suitable for direct heating and warming of liquids of all kinds. Corresponding to the nature of the different media protective coverings of steel, various special steel types or porcelain can be selected. The electric heating inserts of CSN®cartridge type heating elements may be installed or dismounted without the necessity of draining the liquids from the container. The CSN®cartridge type heating elements and bath heaters are manufactured for nominal voltages from 110 up to 690 volts D.C. and A.C. In the case of higher heating capacities 3 or more elements each, being individually divisible by the factor 3 can be star or delta connected to 230 and 400 volts A.C. threephase mains. At 12 kW and a related length the elements are fabricated for 400 volts A.C. threephase delta connections. In any case the desired voltage and type of current has to be stated.

for cartridge with safety valve, see Usbeck article 1430

piezo electric ignition, air regulation

for cartridge with safety valve, see Usbeck article 1430

for cartridge with safety valve, see Usbeck article 1430

for cartridge with safety valve, see Usbeck article 1430

Advantages of Heating Plates with Square Cartridge Heaters: -> Simple plate manufacture due to rectangular groove geometry, no deep-hole boring -> Simple heater installation by bending and pressing along the plate surface -> Complex plate geometries with bores and openings -> Optimal heat transfer due to 75% surface contact -> No casting with heat conductive compound -> Uniform temperature profiles due to thermally optimized groove layouts/power distribution and utilization of insulation plates -> high process temperatures (up to 450°C in aluminium, up to 700°C in stainless steel) Example "Heated Stamp": D=100 mm out of tempered tool steel up to max. 700°C continuous temperature. Fitted with 2 Square Cartridge Heaters 1500 W/ 230 V, 4,5 x 4,5 mm x 600 mm, with 50 mm unheated at the termination end. Annealed and formable with a nickel sheath, resistant up to 850°C surface temperature. Connection by fibreglass insulated pure nickel high-temperature leads (max. 500°C)

outside thread M10 x 1, CE-0085CQ0255

220 g / 400 ml, capacity 3 h, 70 % butane, 30 % propane

This easy-to-use cartridge applicator gun is used to apply our Special Adhesive WIT-VM 250. It lets you fill in the bore holes - after the dust and any other particles have been removed - with precision. Robust and durable Easy to use Suitable for applying Special Adhesive WIT-VM-250

Pleated Screen

Synthetic High Pressure

Hilsorb

Pleated Paper Cartridge

Pleated Synthetic – Gasket Seal

Exceptional working characteristics Suitable for the repair of conveyor belts, rubber coatings and linings, as well as for joint seals Two component polyurethane cartridge system Short working and application times Fast, clean and flexible Dry to the touch after 2 minutes Can be ground back and finished after 30 minutes No volatile components Break , impact and abrasion resistant Max. hardness of 60 Shore A Manual application or using a spray system