Calibration certificates - Import export

▪ Analogue version ▪ 5-pin connection ▪ Can be used with all analogue Hydraulic Testers of the PPC series ▪ CAN version ▪ 5-pin SPEEDCON connection plug ▪ Housing: Aluminium (black anodised) ▪ Gaskets: FPM (Viton®) ▪ Accuracy (at 21 cSt): ±1 (% FS*) or ±1 (% of the displayed value) ▪ Pressure measurement connection: SMK20 (M16 x 2) ▪ Temperature measurement connection: M10 x 1 (standard screw plug) ▪ Calibration certificate on request ▪ UNF version on request Ambient Conditions ▪ Media temperature: -20 °C ... +90 °C / -4 °F ... +194 °F ▪ Ambient temperature: -10 °C ... +50 °C / +14 °F ... +122 °F ▪ Storage temperature: -20 °C ... +80 °C / -4 °F ... +176 °F ▪ Permissible particle size: < 10 Micron for SFM-015 < 25 Micron for others ▪ Viscosity range: 10 ... 100 cSt Electrical Data ▪ Response time: 50 ms ▪ Flow Turbine (analogue): A PPC-04/12-CAB3 (3 m / 9.84 ft) Connection Cable is needed to connect the sensor to the current Hydraulic Testers. A PPC-04/12-CAB5-EXT (5 m / 16.40...

▪ Screw-in version, measures current temperatures directly in the pipeline ▪ Rod-type version (-TSH), especially designed to determine the media temperatures in tanks and containers ▪ 5-pin connection ▪ Input signal: 0 ...3 V DC ▪ Output signal: 7 ...12 V DC ▪ CAN version ▪ Indication of the sensor status via LED ▪ 5-pin SPEEDCON connection plug ▪ CANopen protocol profile DS301, Typ 2.0A with manufacturer-specific additions ▪ LSS service DS305 v2.0 ▪ Output signal: CAN bus ▪ Measurement medium: liquids (consult STAUFF for use with aggressive media ▪ Calibration certificate on request Materials ▪ Housing (T): Stainless Steel ▪ Gaskets (T): FPM (Viton®) ▪ Rod (TSH): Stainless Steel 1.4304 ▪ Handle (TSH): Delrin Weight ▪ T (M10x1): 70 g / .15 lbs ▪ T (G1/4): 55 g / .12 lbs ▪ TSH: 120 g / .26 lbs Connection: ▪ a) STAUFF Test connection SGV-16S-G-C6F in the pipeline (only M10x1) ▪ b) Screw-in thread (T): M10 x 1 or G1/4 ▪ c) Screw-in thread (TSH): M10 Ambient Conditions (Screw-in...

The PPC-06/08-plus Hydraulic Testers have been especially developed for the growing demands of system monitoring and troubleshooting in hydraulic and pneumatic systems. PPC-06-plus ▪ With 3 sensor inputs PPC-08-plus ▪ With 4 sensor inputs ▪ Automatic sensor recognition ▪ Larger data memory for up to 1000000 measuring value points and 240000 curve memory points ▪ Possible to record MIN-/MAX values over long periods ▪ Internal trigger function ▪ External trigger function ▪ Online data transmission ▪ Display lighting ▪ Programming by PC and notebook ▪ Integrated USB interface ▪ CE certified ▪ Calibration certificate on request Materials ▪ Housing made of fibreglass-reinforced PA Dimensions and Weight ▪ WxHxD: 106 x 235 x 53 mm / 4.17 x 9.25 x 2.09 in ▪ Weight: 530 g / 1.17 lbs Measurements / Display ▪ Pressure: in bar, PSI, mbar, kPa, MPa ▪ Temperature: in °C and °F ▪ Volumen flow: in l/min and US GPM ▪ Rotational speed: in 1/min and RPM ▪ Digital LCD display: 128 x 64 Pixel ▪...

The PPC-04/12-SDS-CAB Rotational Speed Sensor allows non-contact speed measurement of rotating components. The sensor is based on a opto-electrical measurement principle that determines the rotational speed with high-accuracy using a reflecting strip on the shaft. The contact rotational speed measurement is obtained by using a Contact Adaptor that is mounted to the sensor, and which makes contact with the rotating component during measurement. This also produces high-accuracy measurement results. In the case of espacially small areas, using the focusing adaptor facilities measurement. ▪ 5-pin connection ▪ Both contacting and non-contacting measurement possible ▪ Type of measurement: optical, red LED ▪ Calibration certificate on request Material ▪ ABS Weight ▪ 230 g / .51 lbs Measuring Range ▪ Measuring range: 20 ... 10000 1/min ▪ Measuring distance: 25 ... 500 mm (1 ... 20 in) ▪ Measuring angle: ±45 °C ▪ Accuracy: ≤ ±0,5 % FS* ▪ Resolution: ±5 1/min Electrical Data ▪ Output...

▪ Analogue version ▪ 5-pin connection ▪ Can be used with all analogue Hydraulic Testers of the PPC series ▪ Input voltage: 7 ... 12 V DC ▪ Output signal: 0 ... 3 V DC ▪ CAN version ▪ Indication of the sensor status via LED ▪ 5-pin SPEEDCON connection plug ▪ CANopen protocol profile DS406 v3.2 with manufacturer-specific additions ▪ LSS service DS305 v2.0 ▪ Sturdy Stainless Steel housing (1.4301) ▪ FPM (Viton®) gasket ▪ Weight: 200 g / .44 lbs ▪ Suitable for gases and liquids (in the case of aggressive media, only after consultation) ▪ Accuracy (±0,25% FS* typ.) ▪ Automatic sensor recognition ▪ Pressure connection G1/2 (without adaptor) ▪ Calibration certificate on request Ambient Conditions ▪ Media temperature: -25 °C ... +105 °C /-13 °F ... +221 °F ▪ Ambient temperature: -25 °C ... +85 °C / -13 °F ... +185 °F ▪ Storage temperature: -25 °C ... +85 °C / -13 °F ... +185 °F ▪ Compensated range: 0 °C ... +85 °C / +32 °F ... +285 °F ▪ Load cycles (10 6): 100 Electrical Data ▪ Response...

Discover the easy handling and flexible usage of our Hydraulic testers of the PPC series. Learn more about these testing devices on our special microsite. Pls. click here The PPC-04-plus and PPC-04-plus-CAN Hydraulic Testers have been developed for the growing demands in mobile and industrial hydraulic systems. They are perfectly suited for the precise determination of pressure, temperature, volume flow and rotational speed. PPC-04-plus ▪ Analogue version ▪ Max. two analogue sensors can be connected at the same time PPC-04-plus-CAN ▪ CAN version ▪ With CAN interface, max three digital sensors can be connected at the same time ▪ Max. CAN bus length: 50 m / 164 ft ▪ Multi-line, backlit LCD display ▪ Integrated data memory for 15000 data records ▪ External storage by using a USB memory stick ▪ Calibration certificate on request (only available for the analogue version) ▪ CE certified Materials ▪ Housing made of ABS in a rubber protective Dimensions and Weight ▪ WxDxH: 96 x 172 x 54...

Traceable calibration of testing machines and instruments is essential for industrial quality control. Calibration certificates are a compelling proof of test equipment inspection for the standards DIN EN ISO 9000ff and DIN EN ISO / IEC 17025. The time intervals for the calibration will depend on the applicable standard, but should normally not exceed 12 months. Attention should also be paid to the rules for local changes or repairs. Take advantage of our many years of experience in the field of calibration. TesT is accredited by the German Calibration Service (DAkkS, member of WECC) for on-site calibration of testing machines, for the quantities force, length and torque as well as a permanent laboratory for calibration of compressive force transducers