Cable- flexible - Import export

PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.

The SKDS hinged edgeprotector is a massive edge protector for cable grummets. The edgeprotector flexibly adapts to the load, increasing the radius over critical edges and distributing the lifting forces over a larger area. The cable and load are equally protected. It is available in two versions, featuring either a steel or aluminium hinge.

The CS-480 B.flex is the smallest suspension system from BERNSTEIN. And in fact: The 48 mm round tube for the connection of encapsulated IPCs or control enclosures on machines and automation systems is not large. And yet it ensures individual flexibility: Control enclosures or encapsulated IPCs, which are mounted on ceilings, walls or on the floor are often simpler and more ergonomic positioning, if the user wants to position them quickly and to his personal needs. • Simplest and most cost-effective solutionfor hanging and free-standing operator stations • Quick and easy ergonomic adjustment • Continuous equipotential bonding • Maximum cable diameter: Ø 40 mm • Flexible and cost-effective connectionfrom round to square tube • Easy to retrofit – complete exchange of the existing suspension system is not necessary

Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.

Original STAUFF Block Clamps in addition to clamps in the Heavy Series and the Twin Series according to German Industry Standard DIN 3015 (Parts 2 and 3), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 10 mm / .24 inch to .39 inch. Clamp bodies manufactured from Polypropylene. Excellent UV, weathering and chemical resistance – even under extreme conditions.

Most economical solution available for quick, easy and secure pipe, tube, hose and cable installation Original STAUFF Block Clamps in addition to clamps in the Heavy Series and the Twin Series according to German Industry Standard DIN 3015 (Parts 2 and 3), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 42 mm / .24 inch to 1.65 inch. Clamp bodies manufactured from various thermoplastics – also with shock-absorbing and noise-reducing elastomer inserts. Excellent UV, weathering and chemical resistance – even under extreme conditions.

Most economical solution available for quick, easy and secure pipe, tube, hose and cable installation Original STAUFF Block Clamps according to German Industry Standard DIN 3015 (Part 3), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 42 mm / .24 inch to 1.65 inch. Clamp bodies manufactured from various thermoplastics. Excellent UV, weathering and chemical resistance – even under extreme conditions. Tested and approved by several independent certification organisations.

Most economical solution available for quick, easy and secure pipe, tube, hose and cable installation Original STAUFF Block Clamps according to German Industry Standard DIN 3015 (Part 2), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 450 mm / .24 inch to 17.71 inch. Clamp bodies manufactured from various thermoplastics, thermoplastic elastomers or aluminium – also with shock-absorbing and noise-reducing elastomer inserts. Excellent UV, weathering and chemical resistance – even under extreme conditions. Tested and approved by several independent certification organisations.

Most economical solution available for quick, easy and secure pipe, tube, hose and cable installation Original STAUFF Block Clamps according to German Industry Standard DIN 3015 (Part 1), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 102 mm / .24 inch to 4.02 inch. Clamp bodies manufactured from various thermoplastics, thermoplastic elastomers or aluminium – also with shock-absorbing and noise-reducing elastomer inserts. Excellent UV, weathering and chemical resistance – even under extreme conditions. Tested and approved by several independent certification organisations.

The linear movement of a flexible steel cable up to 2m long is converted into a rotary movement by a measuring drum. A return spring prevents the steel cable from sagging. The measuring drum is connected to a pulse generator, which generates two pulses every 0.1 mm offset by 90°. The measuring drum winds the steel cable in a single layer so that the resolution is independent of the position. The rope entry is protected against dirt by brushes.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a flexible steel cable, which can have a length of up to 60 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The measuring drum moves axially on a spindle ensuring that the cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article.The linear movement of a flexible steel cable, which can have a length of up to 5 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum. Two roller units at the cable entry allow for up to 20° <) deflection of the cable.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a flexible steel cable, which can have a length of up to 40 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The measuring drum moves axially on a spindle ensuring that the cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a flexible steel cable, which can have a length of up to 30 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The measuring drum moves axially on a spindle ensuring that the cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a flexible steel cable, which can have a length of up to 3 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum.

The linear movement of a flexible steel cable, which can have a length of up to 2 m, is converted into an angular movement with the aid of a measuring drum. The measuring drum is coupled via a gear to a conductive plastic potentiometer. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The measuring drum moves axially on a spindle ensuring that the cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The cable entry contains a brush to remove dust.

TKD | 01 Flexible Control & Power cables Flexible Power cables for the transmission of electric power as well as flexible control cables to measure, control and regulate or monitor industrial machines & plants. - PVC-power & control cables - Approved power & control cables - Halogen-free power & control cables - PUR-power & control cables, cables for hand-held machinery - Special single cores Excerpt of versions: > shielded, unshielded > UV-resistant, Oil-resistant > UL/CSA recognized, listed > HAR - EU harmonized Excerpt of products: ÖPVC - ÖPVC-CY - ÖPVC-SY - 2YSL(St)CY - 2XSL(St)CY - H05VV5-F - H05VVC4V5-K - MUlTINORM (HAR-UL-CSA) - 2-NORM (UL-CSA) - 2-NORM TRAY (UL/CSA) - FLAME (FRNC) - 2XSL(St)CHK - KAWEFLEX® Control PUR, YPUR - H05BQ-F - H07BQ-F - HIGHFLEX LiFY - ESUY

TKD | 05 Servo-drives, measurement & system cables Flexible & high flexible Servo-drives, measurement & system cables for fixed istallation, flexible use and for use in drag chains & robotic applications. - Cables for servo-drives 0,6/1kV - Measurement & System cables (feedback, encoder, resolver, speedo sensor, signal) - for DriveCliq applicationss - for harsh operating conditions - 3D - suitable in case of torsional stress Excerpt of versions: > shielded, unshielded > UV-resistant, Oil-resistant > UL/CSA recognized > fixed installation, limited flexible, flexible & high flexible > compatible systems for example: B&R, Baumüller, Berger Lahr, Control Techniques, ELAU, Fagor, FANUC, Heidenhain, Jetter, Lenze, LTi DRiVES, NUM, Omron, Rexroth, SEW, Siemens, Sick, Stöber, a.o. Excerpt of products: KAWEFLEX® Servo - KAWEFLEX® 5... Series - KAWEFLEX® Allround - KAWEFLEX® KINEMATICS 3D

TKD | 06 Crane, conveyor & lift cables Highly flexible crane, conveyor and lift cables for reeling, spreader, festoon and lift applications in the field of Crane & Hoist technology (e.g. Indoor / Outdoor / Harbour / Mobile cranes) as well as in the field of Elevator technology ( e.g. Passenger Lifts / Freight Lifts / Panoramic Lifts) - Power, Control & Data cables - for lift applications - for crane applications - for reeling - for usage in baskets - HV & MV Trailing applications 1-30 kV - for trolley systems - Battery charge Excerpt of versions: > flat & round > shielded, unshielded > with and without supporting element > UV-resistant, Oil-resistant Excerpt of products: REELTEC®- FESTOONTEC® - SPREADERTEC® - LIFTTEC®