Cabinets - Import export

These are the pipes made from aluminum,which as the connector to connect the parts.

The IMX12-CCM (Cabinet Condition Monitoring) can be installed in virtually any cabinet or any protective enclosure to ontinuously check the current protection degree there - even retrospectively. The DIN rail device notifies with a switching signal improperly closed doors, as well as exceedances of temperature and interior humidity, to the control system.

Klöpper Therm designs and manufactures specified switch and control cabinets in various designs – for nearly all types of electric surface heating. By the installation of electronic controllers, heating systems can be controlled in dependence of temperature and/or humidity. Arising disruptions during the control of temperature measuring sensors such as e.g. a falling below temperature, can be signalled or transmitted via indicator lights and/or dry contacts. The operating conditions of each heating circuit in the cold store is indicated by LED indicator lights. Via keylock or push buttons, all heating circuits can be checked quickly and simply. You can easily get an overview about economic efficiency and energy consumption of your heating system incl. documentation with an operating hours counter or energy meter.

Key box with combination lock for 36 key tags. Including 6 KEY CLIP tags, index sheet and assembly instructions. • Designer key box made of aluminium with combination lock • The code can be set individually from a choice of up to 1000 combinations • Capacity: For 36 KEY CLIP key holders • Special key rails for secure hold and easy access Excellent overview when used in combination with KEY CLIP key holders due to the permanently visible label • Key rails can be attached at different heights • Clear list of contents through EDP-printable index sheet • Incl. 6 coloured KEY CLIP key holders • Easy, professional labelling with the help of free DURAPRINT® printing software • Incl. mounting kit

Key storage made easy: key boxes from DURABLE The advantages of professional key storage systems are obvious: clear, secure and always within reach. The KEY BOX key boxes are available in various sizes and with a choice of cylinder or combination locks. Particularly practical: the innovative key strips allow KEY CLIP key rings to be hung up in an orderly fashion, making the inscription field perfectly legible. In addition, the computer-inscribable index sheet can be used for an overview of the contents - ideal for clear key storage in the office and at work.

Whether self-adhesive labelling windows, scanner rails, sleeves or various pockets: Use the self-adhesive products flexibly to protect, identify or label your documents. Self-adhesive pictograms & pictogram signs are suitable for marking rooms.

• Very slim, light-weight construction for shirt or coat pocket, with clip • For almost all common closures • Key profile for these applications: heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. doors & windows in new buildings, locking systems, technical installations and many more • Bit (1/4") made from high-quality tool steel and specially hardened • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • The twist mechanism allows three different profiles to be activated. • With ultra-bright LED torch in the clip • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• Very slim, light-weight construction for shirt or coat pocket, with clip • Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations and many more • Bit (1/4") made from high-quality tool steel and specially hardened • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With ultra-bright LED torch in the clip • The twist mechanism allows four different profiles to be activated. • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

General Features Elite CR Series Flat & Curve LED Signage that delivers truly captivating content in any indoor & outdoor environment. Advanced High Brightness Black technology, Advanced High Refresh Rate, Fast installation of panel to Light Frame, Just Signal person to install/uninstall, savin labor cost Die-Casting Aluminum frame design. All Front Services Light Weight Aliminum Die-Casting Faster Cooling Advenced and safety Lock Nova Star Controller indoor Space Black / Outdoor Black Shell Mechanical / assembly features: ​ No noise, lower power consumption, good heat dissipation. Hot swapping of the back panel to replace PSU & electronics Fly bar for both hanging and ground stacking Corner protection for safe transport in case Fly bars are suitable for both hanging or ground stacking application ​ Components/Electronic features: Premium components​ Black mask for superior contrast and rentability Standart - Pro 16 Bit / Plus 18 bit+ greyscale

Modular Supply and Disposal System of mobile dispensing and disposal modules for Gynaecology and Proctology workplaces - 9 individual, mobile modules - Made of high-quality sheet steel with sound-absorbing insulation, easy to clean, powder coated with a high-gloss finish, extremely scratch and impact resistant, stands up to disinfectants, and is UV and climate resistant - Flexibility provided by low-friction castors. - Disposal modules with electromotive opening by tapping on the panel or sensor technology - Drawers with built-in heating plate for preheating of specula.

Control cabinets form the technical "central nervous system" of every production plant. They supply machine and plant components with electrical energy, protect electrical circuits, control drives and network machines with the Internet. In addition, they act as an interface for all information on the current plant and processing status and link production exactly where processes need to be accelerated and efficiency increased. Our subsidiary ATR Industrie Elektronik GmbH is your competent partner for the construction of switchgear and switch cabinets. We supply a wide range of different versions based on all current national and international standards. Switchgear is used in almost all industries, in addition to the wood-based panel and metal industry, e.g. in the automotive sector, in turbine and compressor technology, in energy supply or also in cooling and air-conditioning technology.

75mm Length, 90°hinge,both Zinc Alloy and Stainless Steel versions available,ROHS compliance

Bright Chrome Plated Zinc Alloy Handle,Padlock version available,Easy Installation,ROHS compliance

Zinc Alloy and PA6 versions available,two sizes 160*36mm and 120*36mm,90°open and lock,Easy Installation,ROHS compliance

Nanometer painted Zinc Alloy housing,handle and insert,1P or 3P cam,Quick Open,Easy Installation,ROHS compliance

Special features of our model range SUPER BABY: • Compact and elegant design • Simple operation • Low material consumption • Highly efficient dedusting • Efficient function • Environment-friendly function without dust harassment • Adjustable material consumption The SUPER BABY has a large door that opens to the top and allows to put in the work pieces easily. Due to the mounted sinkhole the blast media circulation is possible without any other additional equipment. With the controls to adjust the blast media it is easy to adjust the blast-media consumption and to change the blast media type. A built-in nozzle-holder and an injector type blast-head with hardened air- and blast nozzle (manual operation), as well as a working grid allow an easy operation. A Shock-resistant linear fluorescent luminary gives glare-free light in the work area. Efficient injector sandblasting booth Superbaby. Direct from manufacturer, MADE IN GERMANY.

The housing is made of folded stable sheet steel and welded. In the cabins 2 workports with built-in rubber sleeves (easily exchangeable) are incorporated. The cabin is equipped with a blast hose, nozzle holder and nozzle 1 made of hard metal. For the different requirements are made of hard metal nozzle with a diameter of 0.8 mm, 1.0 mm or 1.2 mm for selection. All blasting medium-pressure vessel (1 - 3 Tank System) have a volume of 2 kg and provided with a closure cap. In all systems, a pressure reducing valve and a pressure gauge for setting a constant jet pressure, and compressed air supply are fitted with plug-in nipple. All systems are equipped with a pneumatic foot switch for turning on and displaying the blasting process.

DSK-Eco series in stable steel plate design with attached dust filter system and automatic blasting agent circulation. Our model DSK-Eco is characterized by its elegant design, simple operation, low material consumption, highly effective dedusting, rational operation. The models of the DSK-Eco range have a large, top-opening sectional door. A blasting medium circuit without any additional device is made possible by the built-in blasting device. A nozzle holder with a continuous jet nozzle, as well as a working grate in the system guarantee an extremely uncomplicated operation. A glare-proof Goliat lamp, exposed to the outside, illuminates the entire work area glare-free. A blasting cyclone recovery unit is used to classify the blasting agent. Efficient pressure-beam cabin of the DSK-Eco series. Direct from manufacturer, MADE IN GERMANY. We adapt the cabin to your needs.

The AQUA BLAST wet blasting cabinet is a combination system for degreasing and simultaneous gentle beams of various workpieces. The water - jet mixture is housed in the cabin swamp. This abrasive mixture is sucked in via a novel centrifugal pump of wear-resistant polyurethane. At the jet of compressed air is additionally adjustable added so as to achieve an optimum surface finish. After loading of the workpiece, the blasting medium mixture flows back into the cabin sump and is thus an abrasive circuit ensured. Battered fine abrasive is suspended from the cab sump and fed to a band filter on the cabin back.

As an experienced manufacturer of sandblasting halls and facilities of blasting houses, we offer with our team, problem solutions tailored to your needs and individual case worked out. Price on request

The injector-glass-blasting cabin is operated by hand with a gun. A blast-collecting collector ensures a smooth blasting circuit within the system. With the help of roller rails, as well as through-slots (on the side and in the roof surface with special brushes against the penetration of dust), surface treatment of glass panes is easy. On the front side there is an easy-open loading door for radiating hollow glass bodies. A work grate and two shock-proof long-field lamps (for glare-free illumination of the blasting chamber) guarantee a smooth workflow. The foot switch as well as the drain cup on the blasting agent funnel, an attached control box with pressure reducing valve and pressure gauge, motor protection switch, on / off button, solenoid valve, control lights, switches for interior lighting, main switch, emergency stop switch and support control ensure uncomplicated operation.

Our model "Super-Glasmatic" is particularly characterized by a compact, Compact design, simple operation, low material consumption, optimum use of space, highly effective dedusting, rational workmanship, environmentally friendly operation without dust pollution and adjustable material consumption. Housing with 2 mm steel plate, with complete blasting agent recovery, with drain cup for quickest change of blasting agent, with interior lighting of the blasting chamber, with brush slots at the front, approx. 600 mm long for optimum processing of the glass objects, with 3 brush slots on the side and at the top for problem-free penetration of the parts to be irradiated, With sliding blades at the sides for dust-tight closing of the booth during the blasting process, with standard beam head and spray gun with hand lever, with all necessary compressed air and blasting hoses, with large plexiglass door (750 x 400 mm) for optimum visibility Filter system (residual emission <5 mg / m³).

The filter housing is made of sturdy steel plate with a reinforcement of structural steel frame. Equipped with inlet and outlet openings for the dusty or filtered air. The inspection cap is used to control the automatic filter and has a flap for access to the built-in filter cartridges. These are made of folded polyester material having a filter area of each of 8 and 14 m². Provided with upper and lower reinforcing rings of plastics material for fastening in the holders. The dust drawer is equipped with wheels, allowing easy extraction during disposal of the dust. The centrifugal fan with a flanged electric motor and the fan / motor unit is built up in the filter housing - the motor is bolted with its flanges on the filter housing and surrounded by the sound enclosure.

The device is a rugged Industrial Equipment for industry and trade for marking large quantities. Our model "Professional" is working very effective, economical and requires only one low maintenance. It can be very fine lines to to 1.10 mm accuracy blasted. Furthermore, this machine works quietly and dust free. Technical specifications length 800 mm width 700 mm height about 850 mm (optional changeable) mass 120 kg Compressed air required 2-8 bar

3 sizes for marking of flat glass panes and Hollow glass bodies with logo's or lettering, max. 25,38 and 54 mm diameter! The device consists of in detail 1 tank made of sturdy steel plate, 6 liters. Contents, 3 feet, mounting bracket, lockable Fill cap for the blasting agent (corundum), and overpressure nozzle with filter element Needle felt (easy to replace). 1 special blasting gun with built-in injector nozzle, and venturi wide mouth – blasting nozzle and Compressed air connection nipples. 1 special distribution head for receiving the stencil, which are rapidly renewable, and the Recycling of the blasting agent in the container or in the filter element. 1 set = 4 pcs. Connecting hoses between blasting gun and containers or distribution head and the container.

This is the ideal piece of equipment for blasting small and even smaller surfaces of glass and metal for matting, fettling, cleaning, polishing and drilling. All mineral media such as corundum, glass beads, cullet, silicium, walnut and plastic granules in the grain size range of 0 - 300 μ can be used as blasting agents. There is a selection of hard metal nozzles with a diameter of 0.8 mm and 1.0 - 1.2 mm as well as 1.5 mm for various requirements.