Boxes - Import export

Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application. Container types for unalloyed and medium-alloyed shielding gas welding wires

The housing of the 2008Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 8 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

The housing of the 2003A floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 3 installation devices. The sockets have a VDE mark. Further equipment variants on request.

The leveling set 12202 is a professional height correction for the floor box 8912B. The leveling set is made of sendzimir galvanized sheet steel.

The CEE floor box 6610A consists of a housing in stainless steel 1.4301 (3 mm) and a lockable, 20 mm thick lid made of anodized aluminum. When closed, the CEE floor box is not waterproof. In the outdoor area, a drain pipe must be provided on-site to drain the housing. Due to the surface load of 6.5t, this version can be driven on with a truck if it is properly installed and the lid is completely closed. The lid opens with the help of a gas pressure spring and can be closed with plugged-in connectors. Further configuration variants on request.

CEE floor box 6522A with a housing made of stainless steel and a lockable lid made of anodised aluminum. Lid closes watertight. Degree of protection IP 65. Other configurations on request.

CEE floor box 6400E with one slot. The housing of the CEE floor box is made of stainless steel, the device carrier is made of aluminum. Installation can take place anywhere in the floor, since pipelines are used for the line feed. The lid closes even when the plug is inserted. Further configuration variants on request.

Height-adjustable floor tank 8920B with 20 slots. The housing is made of sendzimir galvanized sheet steel, the frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Height-adjustable floor tank 8912B with 12 slots. The housing is made of sendzimir galvanized sheet steel, the frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Height-adjustable floor tank 8908B with 8 slots. The housing is made of sendzimir galvanized sheet steel, the frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid, with two versions of cable outlets, closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Height-adjustable floor box 8904B with 4 slots. The housing, frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid, with two versions of cable outlets, closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Height-adjustable floor box 8902B with 2 slots. The housing, frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid, with two versions of cable outlets, closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Floor box 8810B made of polished stainless steel for 10 units. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The rimless lid also closes when the plugs are inserted and is designed for sticking on floor coverings. Further equipment variants on request.

Floor box 8808B made of stainless steel. Inside there are two aluminum equipment racks for 4 units each. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The rimless lid also closes when the plugs are inserted and is designed for sticking on floor coverings. Further equipment variants on request.

The housing, the lid and the frame of the floor box 2008B are made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be covered with your own floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 8 installation devices. The sockets are VDE certified. Further equipment variants on request.

The housing of the 2008A floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 8 installation devices. The sockets have a VDE mark. Further equipment variants on request.

The housing of the 2004Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 4 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

The housing of the 2004A floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 4 installation devices. The sockets have a VDE mark. Further equipment variants on request.

The housing of the 2003Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 3 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

Floor socket 8804B made of aluminum with lid for laying on. The lid closes even when the standard plugs are inserted in straight or angled form. The rimless lid can be covered with your own coverings! Further equipment variants on request.

High-quality cable box made from fire-retardant plastic. With opening for perfect cable management. • Cable box for holding cables and a 5-socket power strip • Rubberised cable outlet slots on both sides for easy handling and excellent ventilation • Easy to charge mobile devices thanks to round cable opening in lid • Large rubber feet for a secure stand • Ensure added safety at the workplace • High-quality, flame-retardant plastic

Drawer box for coffee capsules. Ideal for placing right underneath the coffee machine. • Modular storage box with two drawers for catering utensils • Can be placed underneath capsule and pad machines to save space • Provides easy access to coffee utensils (e.g. up to 70 coffee capsules) • Ideal for use in kitchenettes, lounge areas and meeting rooms

The collapsible ORBIS OceanPak® is designed for intercontinental shipments with a footprint that is optimised for transportation in an ISO sea container. The OceanPak® can be collapsed when empty to reduce storage and return transportation costs. A 40’ sea container holds 60 fully assembled containers and 160 collapsed, empty units. The reusable plastic container is suitable for multiple use over a long service and represents an alternative to one-way packaging. Manufactured from 100% recyclable materials, the use of plastic transport packaging makes the disposal of packaging obsolete. - Ideal for long distance/intercontinental sea freight - Weight capacity of 900 kg - Collapsible to reduce shipping cost - Easy to clean, rust-free

The ORBIS IonPak® is a UN certified plastic container that is designed to transport solid dangerous goods (e.g. UN3480). The solution consists of a durable standard container with customised inner packaging. The lithium battery shipping boxes are suitable for non-certified batteries, prototypes, battery cells, battery modules and batteries in equipment. For increased part protection, the shock absorbing interior packaging is adapted to the customer’s product and supply chain. ORBIS’ lithium-ion battery packaging utilises standard footprints designed to interface with customers’ existing supply chains, e.g. 1200 x 1000 mm. - Certified solutions according RID/ADR - Customer-specific dunnage development - Heavy-duty solution for heavy batteries - Comprehensive product protection - Reusable and recyclable - Different footprints available ORBIS Europe supports you through the entire process – from development to certification of your packaging solution.

ORBIS Europe offers large collapsible bulk containers for rugged industrial and automotive applications. With an extended length, collapsible design, the XXLPak is designed to handle, heavy, long and hard-to-fit parts. It optimises space utilisation at the same time. Our extra-long bulk containers are available with wide access doors and manufactured from high-density polyethylene using a structural foam-molding process for increased durability. Multiple footprints, heights, door configurations and labelling options are available in order to adapt our large bulk containers to customer’s supply chain needs. The extended length containers are designed according to American footprints and multiples of the European standard footprints. - For bulky, hard-to-fit parts - Durable, all-plastic design - Safe handling - Foldable and stackable - Ideal size for logistics and automated systems - Multiple heights and access door configurations

With a 1200 x 800 footprint, the ORBIS GitterPak® is a reliable 1 to 1 substitute for metal gitterboxes, metal tubs and wooden crates in automotive and industrial applications. The collapsible and stackable design offers transport efficiency and warehouse space savings. Due to the unique side wall design, our folding pallet boxes are particularly robust and can be used for years to come. Plastic pallet boxes do not rust and prevent metal-on-metal part damage with an all-plastic design. The ORBIS GitterPak is manufactured from 100% recyclable materials. At the end of the service life, we offer to buy back obsolete plastic packaging and use the raw materials in new packaging production. - 900 kg weight capacity - Stackable 1 + 5 static / 1 + 2 dynamic - Collapsible 1 : 2,7 - Easy and quick repair on site

ORBIS reusable bulk containers are designed to protect and transport heavy parts in automotive and industrial applications. Engineered for rugged applications, the plastic bulk containers are extremely robust and offer comprehensive product protection over a long service life. The 1200 x 1000 plastic bulk containers are available in multiple heights for increased packing density. The collapsible design with a return ratio of up to 1 : 3 reduces the shipping of air during return transport to a minimum. Key features: - manufactured from recycled material - multiple heights, access door and bottom configurations - durable all-plastic design - improved workplace safety - easy, on-site repair and part replacement - 100% recyclable

DIN Road caps made of cast iron

Washing machine installation box with through-flow circulation pipes for drywall construction, with thermally insulated and condensate-proof insulating body, with 1 internal thread Rp 1/2 and 2 MultiFit-Flex system pipe connections 16 mm and drain connection 50 mm 50 mm, dimensions 270 x 350/430 x 70 mm