Results for
Germany
Simply headed articles (screws and bolts) with diameters ranging from 1.5 to 6 mm and a length of up to 650 mm. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.
Request for a quoteGermany
Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides
Request for a quoteGermany
The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.
Request for a quoteGermany
The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.
Request for a quoteGermany
The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.
Request for a quoteGermany
The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.
Request for a quoteGermany
Our bolted shelving is a real storage-technology classic and a low-cost alternative to the SCHULTE plug-in system. To assemble the double-sided bolted shelving, angle profiles and shelves are bolted together. The system perforation in the MULTIplus150 and MULTIplus250 versions allows for flexible design with a whole host of accessories. — Bracing with corner angles — Loading and unloading of the stock items possible from both sides — Short picking routes — Assembly through bolting in the shelves — Height of the shelves can be adjusted in increments of 25 mm — Individual adaptation to spatial conditions and to the stored items with 3 shelf widths — Economically priced alternative to the plug-in system
Request for a quoteGermany
PLACOGRIP® High quality index bolts for the most exacting demands INDEXING BOLT Stainless steel nickel plated SLEEVE Stainless steel KNOB Polyamide black Further RAL – or special colors upon request Also available with lock nuts DIN 439 for index bolts
Request for a quoteGermany
STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc
Request for a quoteGermany
STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.
Request for a quoteGermany
SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.
Request for a quoteGermany
We supply tailored, special parts manufactured with our state-of-the-art cold-moulding and extrusion equipment. We can press cold-moulded articles – whether solid, semi-hollow or hollow – according to your drawings. Complex moulded parts and individual, special projects are our strengths. Our cold-moulding competence covers flanged bolts, studded parts, stepped bores and parts with an internal or external thread. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.
Request for a quoteGermany
PLACOGRIP® High quality index bolts compact, with stop, proper to small construction dimensions and thin walls INDEXING BOLT Stainless steel 1.4305 SLEEVE Steel gunmetal finish KNOB Polyamide black Further RAL – or special colors upon request PLEASE NOTE Particularly suited for screwing in thin-walled items In this version with stop the button is pulled out, rotated by 90° and secured by the notch Also available with lock nuts DIN 439 for index bolts
Request for a quoteGermany
Parts are made to custom design from drawings, from very small quantities to industrial mass application, pursuant to standards, in a wide range. We supply components in accordance with customer requirements, with a special or knurled surface, and with a range of head forms, such as ring, eyelet, hook, triangle or ligature. Screws, bolts and axles from 1.5 mm to 12 mm can be made with lengths of up to 397 mm; customer lengths available on request (also on request with lock serrations). Knurled axles (knurling either DIN or to customer requirements), threads of M2 to M12 made of plastic or wood or with rolled thread, thick or thin shafts. Ligatures with threads of M2 to M8, or wooden thread with or without weld warts. Rivets and pins with diameters of 1.2 mm to 10 mm, with or without bevelling. Also knurled (knurling either DIN or to customer requirements).
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces
Request for a quoteGermany
Drop-forgings of carbon and alloyed steel, nickel, duplex, titanium and superalloys like Monel® or Hastelloy®, Inconel®, Incoloy® for pressurized components like forged valves or valve parts like bodies and yokes or bonnets, flanges for boiler systems, fittings for piping, non-corroding parts for shipbuilding, marine technology, slings and lifting gear, hooks, eyebolts, nuts, chain links, military vehicles, transportation and defense. Every nut, bolt, and screw - forgings for harsh environments: forged valve bodies, bonnets, yokes and flanges, pipe connections, pressure applications like boiler parts, hoists, chain links, eyebolts, hydraulic components, corrosion and acid-resistant parts for chemical and fertilizer industries, as well as shipbuilding and drill equipment. Pressure equipment and nuclear power (valves, boilers, piping): PED 2014/68/EU, AD 2000-W0, ASME/ASTM, KTA, RCC-M Shipbuilding and maritime industry ABS, BV Marine & Offshore, DNV, LR Shipping, ClassNK
Request for a quoteGermany
▪ With plastic pipe saddle RUK (short) and u-profile ▪ To be used as fixed point clamps only ▪ Covering all standard metric and imperial diameters between 48,3 mm and 521 mm / 1.90 inch and 20.51 inch
Request for a quoteGermany
▪ With plastic pipe saddle RUK (short) or RUL (long) ▪ Covering all standard metric and imperial diameters between 25 mm and 521 mm / .98 inch and 20.51 inch
Request for a quoteGermany
▪ Covering all standard metric and imperial diameters between 25 mm and 521 mm / .98 inch and 20.51 inch
Request for a quoteGermany
This stainless steel anchorage point (Ø 16mm) and base plate (290 x 200 mm) were developed for usage on a warm roof. The anchor is easily installed from above using the 4 specially prepared toggle bolts included in the package. EN 795:2012, A + CEN/TS 16415:2013 Trapezoidal sheeting (positive/negative), steel ≥ 0.63 mm Warm roofs, distance between the bores: 180 to 250 mm incl. specially prepared toggle bolts Add a supporting tube for usage as an end or corner post in a lifeline system
Request for a quoteGermany
You can use this stainless steel anchor on trapezoidal sheeting (positive or negative) either as an anchorage point or for attaching a safety net. The special toggle bolt included in the package comes with its own integrated seal. EN 795:2012, A + EN 1263-2:2014 Sandwich and trapezoidal sheeting (positive/ negative) Steel ≥ 0.75 mm Aluminium ≥ 2.00 mm
Request for a quoteGermany
This stainless steel anchorage point (Ø 16 mm) and matching base plate (220 x 220 mm) - certified by the German Institute for Construction Technology (DIBt) - can be easily installed on a suspended flat roof ceiling made of concrete. The 4 hollow slab expension dowels that come with the device ensure a reliable hold. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 For concrete hollow core slab ceilings ≥ C45/55 Web thickness: min. 25mm Installed using 4x V4A expansion dowels (included) Upgrade with a supporting tube for usage as an end or corner post in a lifeline system
Request for a quoteGermany
This stainless steel anchorage point (Ø 16 mm) and base plate (290 x 200 mm) are designed for easy on-top installation. Simply insert the 4 special toggle bolts included in the package into pre-drilled holes in the trapezoidal sheeting. This device has been awarded national technical approval by the German Institute for Construction Technology ("DIBt"). National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 Trapezoidal sheeting (positive/negative), steel ≥ 0.5 mm (0.63 mm according to the "abZ" specifications) Warm roofs, distance between the bores: 180 to 250 mm Installation materials included Add a supporting tube for usage as an end or corner support in a lifeline system
Request for a quoteGermany
Install this kind-to-you-roof, stainless steel anchorage point on trapezoidal sheeting using just one single toggle bolt (included). After installation, the supporting rod (Ø 42 mm) fits the opening made in the insulation layer perfectly. EN 795:2012, A + CEN/TS 16415:2017 Trapezoidal sheeting ≤ 0.75 mm Ideal for retrospective installation Installation materials included
Request for a quoteResults for
Bolted - Import exportNumber of results
60 ProductsCompany type