Results for
BS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
The complete floor box 2004B is made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be fitted with various floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 4 installation devices. The sockets are VDE certified. Further equipment variants on request.
Request for a quoteVKF RENZEL GMBH
Germany
The price-performance winner among the rainwater-resistant A-stand! This rainwater resistant customer stopper is ideal for outdoor use in pedestrian zones or on the pavement. Through a deliberately offensive orientation in these areas of application, the poster outdoor stand generates the highest possible level of attention. This turns passers-by into potential buyers and the clientele is constantly expanding. The uniform, high-quality appearance is ensured by the silver anodised snap frames and the silver anodised frameworks. In order to effectively protect the inserted posters from rainwater, a rubber seal surround is mounted on the weather-resistant polystyrene back panels. The special profile technology used in this pavement sign also ensures extended protection. The anti-reflective cover sheets are made of UV-stabilised material to prevent the posters from fading. Furthermore, the anti-reflective coating of the films ensures that the inserts are much easier to read even in sunlight.
Request for a quoteVKF RENZEL GMBH
Germany
This double-sided A-board is equipped with 2 waterproof poster pockets instead of the normal covers, so that your posters are optimally protected against rainwater. Furthermore, the back panels of this poster display are made of weather-resistant polystyrene. The poster stand thus defies all wind and weather. The uniform, high-quality look of the rainproof poster stand is ensured by the silver anodised click frames and the silver anodised base frames. The click frames are made of the 30 mm aluminium profile. To change the advertising media, the 4 frame profiles of the pavement stand are opened. The poster pocket is removed and the insert is replaced. After the exchange, the poster pocket is put back into the A-board and the profiles of the click frame are closed again. The poster exchange is done. Due to the use of waterproof poster pockets, the 30 mm profile creates a free space between the poster and the frame for technical production reasons.
Request for a quoteVKF RENZEL GMBH
Germany
The quality winner among the rainwater resistant A-bords! This rainwater-resistant pavement sign is ideal for outdoor use, for example in pedestrian zones. Through a consciously offensive orientation in these areas of application, the poster stand generates the highest possible level of attention. Thus, passers-by become potential buyers and the clientele is constantly expanding. The uniform, high-quality appearance is ensured by the silver anodised click frames and the silver anodised rack. In order to protect the inserted posters effectively against rainwater, a surrounding grooved rubber sealing is mounted on the weather-resistant metal back walls and on the covers. The anti-reflective covers are made of UV-stabilised material to prevent the posters from fading. Due to the folding technique the insert media, such as posters, can be changed easily and quickly. In order to be able to achieve an optimum clamping effect even after years, we always use springs made of spring steel.
Request for a quoteVKF RENZEL GMBH
Germany
Interactive multi-touch monitor for use in the classroom, meeting room, public facilities, retail, and wherever a large-format touch monitor is required. The Android-based displays are made of anti-glare tempered glass, are suitable for everyday use and have up to 20 touch points. The professional monitors from Philips are specially optimised for Android apps. Activate the built-in whiteboard mode to turn the display into a blank canvas that can be drawn on by multiple users by hand or with special markers. Displayed content can be captured for quick printing or file sharing. Alternatively, four different areas can be displayed on the screen. Up to 32 devices can be connected simultaneously in the existing WLAN network and switch between contents as required. A direct connection with a dongle is also possible as an option.
Request for a quoteVKF RENZEL GMBH
Germany
A high quality whiteboard made of white enamelled steel. The robust whiteboard is durable and ideal for frequent use. The inscription board is designed with anodised aluminium Softline profiles. Grey plastic corner pieces round off the edges. You can use the storage strip at the front to store writing tools or magnets. Select the whiteboard with or without printing. The whiteboard is also available in many different sizes.
Request for a quoteVKF RENZEL GMBH
Germany
The "Quattro" information board functions as a transparent and stable partition wall. The interaction of the aluminium frame in silver anodised and the transparent acrylic panel offers a simple exterior. At the same time, the board can provide a high-quality separation between customers, patients, employees and areas. A partition wall is a practical article to provide protection spontaneously and depending on the situation. Due to its low weight, the article shown is easy to move and mobile. Long queues, disordered areas or new hygiene regulations require the use of a separation or tracking system. High stability is guaranteed by two flat round base plates with a diameter of 400mm each. The light and anodised aluminium profile is placed on them. An acrylic sheet is held in the profile by a rubber in the frame. The transparent sheet ensures that the area of application is not optically reduced despite the use of a partition wall.
Request for a quoteJA-DE GMBH & CO. KG
Germany
Just as with the solid wood items, we can also accommodate many customer preferences for round wood veneer furniture parts. We manufacture the parts according to your specifications and use the materials you want Lamella, hardboard, particle boards, bendable plywood, specific wood veneers and edges, or we will work according to a given pattern and use our own discretion. Here again, our 5axis CNC moulding machines ensure precision workmanship. Edge processing, borings and mouldings are part of our standard repertoire in the 3D area, too.
Request for a quoteCARL SCHMIDT SOHN GMBH
Germany
Wood fiber cutting board LUBECK use various natural materials and pressed under extremely high pressure and heat, so the cutting board is exceptionally strong, but still retains the texture and natural appearance of the wood. It has a high-density surface and non-absorbent properties, which effectively prevents mildew and bacteria.
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
Light, durable and corrosion-resistant, pre-painted aluminum sheeting products make an ideal base for aluminum license plate manufacturing for cars. Benefits include minimum burr on edges thanks to superior processing, corrosion resistance ensured by a specialized coating on the reverse side and versatile delivery options from coils and sheets to cut blanks and ready-made license plates, which include rounded corners, embossed edges and a painted finish. The alloy and coating are specifically adapted for government requirements and are delivered in accordance with local regulations. Consistency is also ensured with excellent quality controls and compliance with all regulatory bodies, including EN, DIN, ASTM, BS and ECCA. Lastly, aluminum license plate products provide excellent adhesion qualities for reflective film and other applications thanks to a clean, grease-free surface. Choices include top-coating or pretreatment options, or double-coated for non-reflective plates.
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
The CSN® SV Viewer (Sampled Values) is our solution for visualizing and recording the digital IEC 6185092 LE Protocol. This software allows the user to visualize the current and voltage values of different Merging Units. The function Values displays the eight current and voltage values. Additionally it is possible to display a DC offset. In realtime mode, a selectable value is shown continuously. The function Phasor calculates the phase shift between the sampled values channels. The function Waveforms charts the sample values of different Merging Units. The user can add or remove the desired sample values. The waveform can be saved as a screenshot or can be printed by the integrated print function. The function Recorder allows the user to record up to two data streams on the hard drive either as .txtfile, Microsoft Excel Spreadsheet or in COMTRADE format. The .txt files can normally be handled by any spreadsheetsoftware; no special analysis software is required.
Request for a quoteVKF RENZEL GMBH
Germany
A showcase in a class of its own that sets standards in quality and functionality. High-quality processed and anodised aluminium profiles or, on request, powder-coated in RAL colours. Single-pane safety glass, permanent ventilation, scratch-resistant and magnetic rear wall in aluminium silver, vandalism safety locks with patented frost protection and gas pressure springs with secure 85° open position, optional LED lighting - the TN series leaves nothing to be desired. Whether as a wall or floor model, in foyers or in front of buildings. And everything with ten years warranty!
Request for a quoteMICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG
Germany
The sensor module µCAN.1.sg-SENSOR can be combined with all common pressure sensors and is designed to acquire an analogue sensor signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances can be adjusted with the module already built in. The sensor signal is linearized and monitored directly in the hardware.Strain gauge full bridge Voltage ± 20 mV Supply voltage 4.5 V Accuracy 0.2% (FS) Resolution up to 16-bit (1 mV / 1 µA) Sampling rate up to 1kHz Supply of the strain gauge full bridge Scaling / sampling rate adjustable Measurement range adjustable Operating temperatures -40°C … +85 °C Supply voltage 9 V DC … 36 V DC Fieldbus CAN classic / CAN FD Protocol CANopen / CANopen FD / J1939
Request for a quoteSEIFERT ELECTRONIC GMBH
Germany
Maximum heat dissipation using PC board heat sinks in minimal board space. Seifert electronic GmbH offers custom heat sinks for use in the board area – precisely measured and flexibly adapted to your requirements. The wide standard range of Seifert electronic includes PC heat sinks in all common designs. We provide various heat sink models such as snap-on heat sinks made of strip material, extruded heat sinks, die-cast heat sinks, as well as finger heat sinks and U-shaped heat sinks, along with the corresponding accessories like mounting clips for fastening. Extruded profile heat sinks are considered classics among PC board heat sinks. We gladly recommend them for use in the board area as they are versatile and can dissipate relatively large amounts of heat.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
DURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Floor stand with cast-iron base and 10 SHERPA® A4 display panels. Bracket rotates 90°. • Aluminium floor stand with rotatable display panel system • Bracket with 10 SHERPA® display panels in A4 format • Rotates 90° to display information in both portrait and landscape format • Weighted cast-iron base for extra stability • 5-year warranty
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Complete set consisting of a metal wall mount and 10 FUNCTION SAFE A4 display panels. Zippable panels for better document protection. • Complete display panel set for wall applications • Wall-mounted display panel system with 10 FUNCTION SAFE display panels in A4 format • Zip closure on the side of the display panels protects documents against moisture and dirt • Robust and durable wall mount made of powder-coated steel sheet • Display panel made from crystal-clear hard film with reinforced tab in 5/5 division and blank insert sheet • Practical pivot mechanism for simple replacement of the displays • Ideal for use in kitchens, production plants or shops such as butcheries and bakeries • Easy assembly
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
PP display panel for A5 information sheets. • Polypropylene display panel for use in VARIO display panel systems in A5 format • For information materials in A5 format, e.g. price lists, catalogue pages, etc. • Insertion of paper from the top • With fully circumferential, coloured profile frame • Low-reflection film suitable for scanners • Can be retrofitted with tabs (product # 5603 and 5609) • 5-year warranty
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Expansion set for SHERPA® table stands. With 10 SHERPA® A4 display panels. • Extension module with 10 SHERPA® display panels in A4 format (5 units each in grey and black) • For expanding the SHERPA® table sets # 5519, 5520, 5623 and 5632 • Polypropylene display panels with coloured profile frame and low-reflection film suitable for scanners • Incl. tabs with blank insert sheets for labelling the display panels • Practical pivot mechanism for simple replacement of the displays • 5-year warranty
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Complete set consisting of a wall mount and 10 SHERPA® A4 display panels. • Complete display panel set for wall applications • Wall mount with 10 SHERPA® display panels in A4 format (colour -00: 5 units each in red and black, colour -22: grey and black) • Polypropylene display panels with coloured profile frame and low-reflection film suitable for scanners • Incl. tabs with blank insert sheets for labelling the display panels • Practical pivot mechanism for simple replacement of the displays • 5-year warranty • Easy assembly of the bracket
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Acrylic info board for A4 information sheets. For floor stand SHERPA® INFOBASE • Information panel made of crystal-clear acrylic to match floor stand SHERPA® INFOBASE TELESCOPE (product # 5589) • For information materials in A4 format, e.g. safety instructions, operating instructions, telephone lists, etc. • 5-year warranty
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Display panel tabs for listing contents and creating an overview. With blank insert labels. • Tab for display panels for listing contents and creating an overview • Can be clipped onto the profile frame of SHERPA display panels at the top or on one side • With blank insert sheets • 5-colour sequence, 58 mm wide
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Hard film display panel for A4 information sheets. With universal punching and welded tabs. • Display panel made of crystal-clear hard film for A4 format information materials • Ideal for price lists, catalogue pages, illustrations, photos, etc. • Indelible and suitable for scanners • With reinforced 60 mm tab in 5/5 partition for visual distinction and blank insert sheets • For use with base elements equipped with a pivot mechanism • Can be filed thanks to universal punching in profile strip
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Display panel tabs for listing contents and creating an overview. With blank insert labels. • Tab for display panels for listing contents and creating an overview • Can be clipped onto the profile frame of SHERPA display panels at the top or on one side • With blank insert sheets • 12-colour sequence, 23 mm wide
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Floor stand with A4 acrylic info board. Height adjustable, variable reading angle. • Floor stand with crystal-clear acrylic info board (product # 5619) and metal base • Height-adjustable (92–147 cm) • With adjustable reading angle +/-14° • Info stands are ideal for trade fairs, exhibition areas and showrooms as well as for use in the hospitality and gastronomy sectors • 5-year warranty
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Sturdy floor stand with rotatable information board that can be read on both sides. Easy sheet change of information in A4. • INFO STAND BASIC floor stand featuring double-side readability. Suitable for both displaying information and for use as an orientation and guidance system • Information can be easily changed thanks to the two magnetic DURAFRAME® MAGNETIC info-frames , which are attached to the metal plates • High degree of stability thanks to the high-quality support profile and the heavy floor plate, with four rubber feet • Innovative insertion mechanism makes it easy to switch between portrait and landscape format without the need for tools • Ideal for use as an information stand in reception areas, at trade fairs, in lobbies and in waiting rooms • DURAFRAME® MAGNETIC frame sold separate in various colours • A wide range of labelling style sheets is available at www.duraprint.de • Including assembly set and instructions
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Stable aluminium floor stand. With adjustable A4 info board. • A4 format aluminium information stand with a crystal-clear acrylic panel • Secure stand thanks to heavy cast-iron base • Easy replacement of the cardboard inserts for flexible labelling • For DIN A4 information sheets, either portrait or landscape • Ergonomic reading with height adjustability and rotation of the reading angle by 10 degrees • Includes instructions for easy assembly • Matching insert sheets (product # 4856) sold separately • Replacement caps (# 4816) sold separately • Suitable printable insert labels: Article number 485602
Request for a quoteResults for
Boards - Import exportNumber of results
56 ProductsCompany type