Applications design - Import export

Adjustable Energy capacity 4.0 Nm/cycle Stroke 10.2 mm The miniature shock absorbers from the MA30 to MA900 series can be adjusted and precisely adapted to your requirements. For example, the MA150 displays the rolling diaphragm technology from the MC150 to MC600 family and offers all of the advantages of this technology, such as use in pressure chambers. Thanks to long strokes (including 40 mm on the MA900) lower reaction forces result, which provide a soft damping characteristic. All variations of these units are maintenance-free, ready-to-install machine elements and have an integrated positive stop. They provide the best service where application data changes, where the calculation parameters are not clear or where maximum flexibility in the possible usage is required. The adjustable miniature shock absorbers from ACE can be used to meet precisly the customer's application and are therefore found everywhere in mechanical engineering and many other applications.

Adjustable Energy capacity 4.0 Nm/cycle Stroke 10.2 mm The miniature shock absorbers from the MA30 to MA900 series can be adjusted and precisely adapted to your requirements. For example, the MA150 displays the rolling diaphragm technology from the MC150 to MC600 family and offers all of the advantages of this technology, such as use in pressure chambers. Thanks to long strokes (including 40 mm on the MA900) lower reaction forces result, which provide a soft damping characteristic. All variations of these units are maintenance-free, ready-to-install machine elements and have an integrated positive stop. They provide the best service where application data changes, where the calculation parameters are not clear or where maximum flexibility in the possible usage is required. The adjustable miniature shock absorbers from ACE can be used to meet precisly the customer's application and are therefore found everywhere in mechanical engineering and many other applications.

3D design sheets lend shapes and colours a new lease of life for any application where design and expression is called for. The sheets, made of 1.5 mm thick polystyrene, are pressure-bonded onto a substrate (MDF or chipboard) using a 2-component adhesive. Due to the repeat pattern the boards can be combined horizontally or vertically.

3D design sheets lend shapes and colours a new lease of life for any application where design and expression is called for. The sheets, made of 1.5 mm thick polystyrene, are pressure-bonded onto a substrate (MDF or chipboard) using a 2-component adhesive. Due to the repeat pattern the boards can be combined horizontally or vertically.

3D design sheets lend shapes and colours a new lease of life for any application where design and expression is called for. The sheets, made of 1.5 mm thick polystyrene, are pressure-bonded onto a substrate (MDF or chipboard) using a 2-component adhesive. Due to the repeat pattern the boards can be combined horizontally or vertically.

Overpressure or vacuum - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design - Multi-channel applications possible

Self-Compensating, Piston Tube Technology Energy capacity 10 Nm/cycle Stroke 8 mm Soft damping, but enormous capacity: The range of 'soft contact' absorbers SC²25 to 190 extends from thread size M10 to M14 and covers effective weight ranges of 1 kg to 1,550 kg. All models are characterised by high energy absorption and they also unite the piston tube technology with the diaphragm seal perfected by ACE. This enables direct installation as end position damping in pneumatic cylinders at 5 to 7 bar or applications where deceleration needs to take placed close to the pivot point. They are maintenance-free, have an integrated positive stop and are mountable in any position. The option of a side load adapter allows impact angles of up to 25°. Thanks to their robust design and their durability, these miniature shock absorbers can be used for a wide range of applications. Designers mainly use them for pick and place systems, pneumatic rotary modules and in automation applications.

Self-Compensating, Piston Tube Technology Energy capacity 16 Nm/cycle Stroke 10 mm Soft damping, but enormous capacity: The range of 'soft contact' absorbers SC²25 to 190 extends from thread size M10 to M14 and covers effective weight ranges of 1 kg to 1,550 kg. All models are characterised by high energy absorption and they also unite the piston tube technology with the diaphragm seal perfected by ACE. This enables direct installation as end position damping in pneumatic cylinders at 5 to 7 bar or applications where deceleration needs to take placed close to the pivot point. They are maintenance-free, have an integrated positive stop and are mountable in any position. The option of a side load adapter allows impact angles of up to 25°. Thanks to their robust design and their durability, these miniature shock absorbers can be used for a wide range of applications. Designers mainly use them for pick and place systems, pneumatic rotary modules and in automation applications.

Novelis SSL provides a structured aluminum surface for design applications. Imitating brushed stainless steel, the decorative finish offers endless possibilities to manufacturers and designers searching for the look of stainless steel, but also for an alternative to the weight and the maintenance inherent with that material. SSL structured surface anodized aluminum strikes the perfect balance.

With very slim dimensions and overall IP67 protection, the I49 switches are a perfect solution for either position indication or safety applications. — Flat design — Highly flexible deployment — Reliability — Simple and quick installation — Compact IP67 switch for safety applications

▪ Compact and light-weight design for applications such as Pneumatics, Instrumentation and Automotive Technology, Machine Tool Industry, Lubrication and Mechanical Engineering ▪ Available in 4 different sizes and covering all standard metric and imperial diameters between 6 mm and 22 mm / .24 inch and .87 inch

▪ Compact and light-weight design for applications such as Pneumatics, Instrumentation and Automotive Technology, Machine Tool Industry, Lubrication and Mechanical Engineering ▪ Available in 4 different sizes and covering all standard metric and imperial diameters between 3,2 mm and 25,4 mm / .13 inch and 1.00 inch

The SF Filtration System is a systematically designed scheme that allows execution of filtering tasks continuously, with stable pressure rating and processing momentum. This mechanism includes an integration of short flow channels that reassure minimized dwelling period of the melt within the system. The screen modification procedure is carried out without product quality alteration.

The Robust Workhorse: The high-performance MIXACO universal mixer is ideal for many different applications. Whether slow, gentle homogenization or thorough mixing is required, consistently high quality is guaranteed for every mixing process. In particular, the universal mixer’s highly flexible design possibilities enable it to be adapted easily to suit the required mixing task and individual on-site requirements. The MIXACO universal mixer is available in sizes from 20 to 6,000 liters. All Benefits at a Glance •Can be used for a wide variety of applications, such as homogenization, dispersion, coating or granulation •Mixer tools optimized for the individual mixing task •Performance-optimized selection of mixing drives ensures high energy efficiency •Rapid cleaning possible when pivoting mixer lid is open •Double-walled mixing vessel enables ideal temperature control of product during mixing •ATEX version possible

The coolant filter for highest quality demands especially for grinding, honing and superfinishing applications. The modular design allows easy up- and downgrading and the candle filter with dry discharge is energy saving.

The BestFlex Roller is excellent for handling oddshaped boxes, bags and lowgrade cartons in low to medium volume applications. Designed to expand, contract and move easily, the BestFlex Roller is a selftracking, gravity roller conveyor that has a per linear foot capacity of 220Kg per linear metre. The allsteel frame construction provides unmatched structural integrity, whether the conveyor is extended, contracted or configured in simple or compound curves. It is the best choice for moving items without a flat, solid surface. SelfTracking Cartons follow the path of the conveyor without using engineered curves. Adjustable Height Telescopic leg sections are used to raise or lower the conveyor height. Square Tubing Legs Heavyduty square tubing legs offer longer service life and stability. 40mm Side Plate Aluminium alloy construction features a ribbed design for added strength. Assembled with bolts and locking nuts. Castors with Brakes 127mm x 38mm Swivel Castors allow easy movement.

Application Gasflaschenkappe Material DX 52 Design 1.2 mm Fastener -