Results for
ALUMINIUMWERK UNNA AG
Germany
Seamless aluminium tubes can be ordered in all commercially available aluminium alloys in addition to high strength aluminium alloys which are required for more demanding applications. ALUnna has a number of extrusion presses equipped with mandrel piercing capability. This allows us to extrude a large range of extruded tubular dimensions from a number of different billet diameters. The size range for seamless extruded tubes ranges from 17 mm to 300 mm in diameter.
Request for a quoteALUMINIUMWERK UNNA AG
Germany
Depending on the application, tubes may require subsequent drawing following the extrusion process. Examples of this are: a requirement for a high degree of dimensional control and/or the need for tight tolerances, where the final outside diameter and/or wall thickness of the extruded tubes can only be achieved by subsequent cold drawing, where the final mechanical properties for non-heat treatable alloys are to be achieved by strain hardening (drawing) or where special requirements exist for the microstructure of the tubes.
Request for a quoteALUMINIUMWERK UNNA AG
Germany
Aluminiumwerk Unna AG is specialised in the production of Aluminium tubes. The Aluminium tubes are extruded on site using two possible methods. These are either Seamless extrusion or Porthole extrusion. It is quite simple to distinguish between the two extrusion methods. In seamless extrusion, a mandrel is positioned and fixed inside the extrusion die, creating the inner contour of the tube. In porthole extrusion, the mandrel is fixed and is supported by a number of integral bridges affixed to the outer portion of the extrusion die.
Request for a quoteALUMINIUMWERK UNNA AG
Germany
In the aluminium industry, the porthole extrusion process is the standard method for the production of extruded tubes and profiles. The process is limited to a number of aluminium alloys. However, most of the commercially available medium strength aluminium alloys such as EN AW-6060 or EN AW-6082 can be extruded by porthole extrusion.
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
Heat protection tubes are made by layering several kinds of aluminum alloy foil and other materials, such as fiberglass and plastic with corrugations. The excellent reflectivity of the aluminum alloy on the external surface reflects radiant heat, and its insulating power additionally serves to protect the aluminum flexible tube’s content from heat sources. These products have great flexibility but high dimensional stability, and they can be compressed or extended as required. They can also be fastened or mounted easily by crimping the end fittings.
Request for a quoteIGUS® GMBH
Germany
robolink® connecting tubes d26 Customized assembling (length) Inner contour (anti-twist device) Feedthrough of ropes and pneumatic hoses, cables Corrossion-resistant Light Stable robolink® multi-axis joint robolink® Configurator
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
RK tube connectors – the flexible alternative to welded connections The clampable tube connectors from RK Rose+Krieger are a cost-efficient solution for the positive and ready detachable connection of a diverse variety of systems – without the need for drilling and welding. Depending on the field of application and the expected load, RK Rose+Krieger offers tube connectors made of plastic (Light Clamps), aluminium (Solid Clamps) or stainless steel (Robust Clamps). The Solid Clamps tube connector system also includes the RK monitor mounting for the fixation and ergonomic adjustment of monitors and touch screens used in industrial applications. Say goodbye to welding – that could be the motto of the clampable RK tube connectors The simple assembly technology of the clamping elements eliminates the need for time-consuming and cost-intensive drilling and welding work.
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
Air flow routing tubes are designed to channel different kinds of air to appropriate destinations. If you have a specialized vehicle and need superior flexibility in your air duct tubing, these products lead the industry. CARADUCT® flexible tubes are multi-layer, grooved tubes that are wound from a combination of aluminum and paper layers. They possess a particularly high crushing strength and have very good insulation properties. Through high flexibility and small bending radii, they offer good space usage, particularly when laying out in corners. Dükerrohr is a twin flexible tube distinguished by a particularly high insulation effectiveness to reduce temperature drops in the warm air ducting. Since it is installed outside of the vehicle, it carries additional protection against water and oil splashes.
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
By creating specialized aluminum alloys, pioneering new treatments and combining aluminum components with other materials such as paper, plastic and fiberglass, Novelis has become the global quality leader for the transportation manufacturing industry. We have created a range of transportation manufacturing products that provide insulation against heat, sound and gases, high strength so components remain effective under pressure, and superior flexibility for a full range of designs and implementations. Key Novelis aluminum components include heat exchangers, heat protection mats and sleeves, energy absorption elements, hoses, silencers and flexible tubes, including heat protection tubes, air ducts and exhaust pipes. Novelis is a leading supplier of light-gauge, narrow-slit aluminum fin stock (bare and clad) and brazing sheet used in the production of heat exchangers.
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
Our OHLER product line is specifically designed for use in automobiles and caravans. Novelis is one of the leading suppliers of flexible tubes and hoses for the automotive sector with products used for heat protection, air ducts, exhaust pipes, thermal insulation and energy absorption.
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
CORMIFLEX® tubes are folded spiral-seam pipes made of high-grade steel precision strip. Reaching up to 350°C, their high temperature resistance is predominantly used for exhaust gas routing in passenger car, utility vehicle, RV and marine heating units. CORMIFLEX® PLUS bears additional resistance against corrosion due to salt and other aggressive agents.
Request for a quoteSPANSET SECUTEX GMBH
Germany
The noise levels in pipe and rod raising systems can be very high. A chute lined with secutex pipe modules ensures that noise levels are reduced and that surfaces are protected. The secutex material with inset perforated plates is particularly wearresistant and cushions the movement of pipes and rods very well. The cast sections are attached using drilled attachment holes. Segment sizes and joins are manufactured according to client requests.
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
Novelis is the global leader in rolled aluminum products and aluminum beverage can recycling. Our technical competence and innovation have made us a development partner chosen by leading companies from the automotive, building, printing and packaging industries, among others. With its customer orientation and strong industrial performance, Novelis plays a crucial part in shaping products for the future. The aluminium content means that there is only slight thermal length variation, just like with metal tubes. In addition, the tubes become completely oxygen-impermeable, which is indispensable when connecting radiators, for example. Using state-of-art production facilities and experienced specialists, Novelis ensures top quality in the manufacture of its products – across the entire production process, from casting and processing the ingots via hot and cold rolling, to packaging.
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
The light weight and pliability of aluminum make it easy to work with and can streamline installation. In addition to the weight advantage and ductility, aluminum provides a complete barrier to light, moisture and magnetic waves. Impermeable to all gases including oxygen, aluminum also provides superior fireproofing capabilities for both industrial and residential construction. Aluminum insulation offers good noise reduction properties along with resistance to corrosion and heat. Not only does this improve interior environments, it also increases product life and efficiency. These proven characteristics continue to make aluminum the leader in insulation and the preferred choice for all types of building and construction.
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
Heat protection sleeves and mats extend our expertise in protective aluminum flexible tubing to other shapes and uses. Layers of aluminum foil are combined with fiberglass for products that can withstand temperatures up to 750°C.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
RK tube connector – unbeatable variety Thanks to their simple clamping principle, the aluminium tube connectors enable the fast assembly of both round and square precision tubes. The huge diversity of this system is what makes it an attractive and cost-effective alternative to conventional welded connections. Our application expertise and the experience we have gained over several decades as a manufacturer of clamp connectors give you security for individual handling of RK tube connection systems. Connecting tubes with different diameters and cross sections to one another The cast aluminium or extruded aluminium tube connectors impress with good mechanical properties, a wide range of variants and optimum value for money. The Solid Clamps product range currently comprises clamp connectors with a diameter of 8-80 mm for round tubes and of 20-80 mm for square tubes. More than 170 basic types in over 400 different variations are available.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
VKF RENZEL GMBH
Germany
The elegant design of the aluminium tubes makes every façade an eye-catcher. Wall spacers and tensioning cord "storm" for banner mounting included. When installing the frame, 35 mm wall spacers are always considered as an addition to the frame outside format. The listed systems were compiled on the basis of static calculations.
Request for a quoteTROTEC GMBH
Germany
Industrial condenser dryer DH 65 SThe compact industrial dehumidifier DH 65 S dries up to 80 liters per day This condenser dryer is an equally powerful and economic dehumidification solution for various dry keeping applications during industrial processes or product storage. In addition to the hot gas automatic defrost system, the DH 65 S comes with an aluminium tube evaporator without fins which permits an effective dehumidification performance even at a low humidity level. Moreover, the modular refinement of the electrical system and the water-bearing components of this industrial dryer was realized according to European standard. Hence, with the DH 65 S you have a particularly economic dehumidifier for reliable permanent drying applications. Owing to its sturdy swivel casters with RollStop catch, this drying unit can easily be transported from one application site to another.
Request for a quoteVKF RENZEL GMBH
Germany
The uniform, high-quality appearance of this triangular stand is ensured by the silver anodised click frames and the silver anodised aluminium round tubes. The simple assembly is done by screwing the 3 click frames to the 3 stable ø 60 mm aluminium legs. In order to effectively protect the inserted posters from rainwater, a circumferential sealing rubber is mounted on the weather-resistant metal rear walls, in addition the cover foil is glued to the rear wall on a short side. The cover foils used are made of non-reflecting, UV-stabilised material to prevent the posters from fading. Furthermore, the anti-reflection coating of the films ensures that the inserts are much easier to read even in sunlight. The posters can be changed quickly by opening the click frame profiles at the front. The highlight of this display is that the complete rear wall with foil can be removed for even easier poster changing.
Request for a quoteVKF RENZEL GMBH
Germany
In those areas where employees meet each other or where sales staff and customers are standing together, special hygiene regulations must be observed in the current situation. The "Construct" partition wall is ideal for protecting employees and customers. The silver anodised aluminium square tube provides the basis for setting up the plastic panel. It is crystal clear and, with a size of 1000 mm width and 800 mm height, offers exactly the right hygiene protection for separating the breathing areas of at least one person standing. For transport, the partition wall can be divided in height. The spitting protection wall has a total height of 2000 mm and offers optimal application possibilities, for example at cash registers or service counters. Adjoining workplaces can thus be easily separated from each other, while room brightness and atmosphere are only slightly affected. Documents or goods can be pushed through under the separating pane.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Four new models for even more flexibility The product family of aluminium Solid Clamp tube connectors has a new addition: size 30 base clamps, sleeve clamps and hinge clamps are now also available for delivery with integrated ball joint. A sleeve clamp with double ball also adds to the range. The ball joints are designed for loads of up to 40 Nm (static). Connected applications can be pivoted freely by 60° and rotated freely by 360°. This way, the new tube connectors with ball joint provide a significantly higher degree of freedom for construction than conventional hinged connectors. An appropriate surface coating on the ball joint makes for a high-strength clamping connection. The clamps feature a universal connecting plate for flexible integration. Features: can be combined with size 30 tube connectors the clamps feature a universal connecting plate (KGFS 30, KGM 30, KGGPZ 30) for flexible integration high-strength clamping thanks to special finishes
Request for a quoteVKF RENZEL GMBH
Germany
In the areas where seller and customer meet in direct contact, special hygiene regulations must be observed in the current situation. The spitting protection "Construct" is optimally suited to protect employees and customers. The shapely aluminium square tube provides the stable frame around the plastic pane. This is crystal clear and with a size of 1,000 mm width and 500 mm height, it offers exactly the right hygiene protection. The entire frame has a height of 750 mm, which allows the possibility of a pass-through in the lower area. The height of the pass-through is 250 mm. Would you like the product in a different format? No problem. Please contact us! We recommend cleaning the material with a soft microfibre cloth and warm soapy water.
Request for a quoteVKF RENZEL GMBH
Germany
In the areas where seller and customer meet in direct contact, special hygiene regulations must be observed in the current situation. The spitting protection "Construct" is optimally suited to protect employees and customers. The shapely aluminium square tube provides the stable frame around the plastic pane. This is crystal clear and with a size of 1,000 mm width and 500 mm height, it offers exactly the right hygiene protection. The entire frame has a height of 750 mm, which allows the possibility of a pass-through in the lower area. The height of the pass-through is 250 mm. Would you like the product in a different format? No problem. Please contact us! We recommend cleaning the material with a soft microfibre cloth and warm soapy water.
Request for a quoteBERNSTEIN AG
Germany
The CS-3000 suspension system is characterised by a combination of well thought-out ergonomics and modern industrial design. It consists of a large number of components that can be combined in any way. The CS-3000 suspension system is an innovative system solution that functions according to the modular principle. — Long service life and safe operation thanks to anodised aluminium tubes — Clean lines, thanks to smooth transitions between the tube and system components (very easy to clean) — Coated tube fastening screws for sealing the thread holes and secure connections — Relative appearance and connection of narrow profiles thanks to the possibility of reducing the cross section from square to round tube — Protection class IP65 — Modular flexible system lets you upgrade the couplings (also after installation), e.g. with adapters for slim enclosures or with tilt adapters — Well designed ergonomics for simple and virtually fatigue free operation
Request for a quoteKELVION HOLDING GMBH
Germany
The wide range of product portfolio of coils with different tube diameters, tube patterns, fin profiles, materials and options allows us to customize our coils for any specific application and fluids: air heaters, air coolers, condensers and evaporators for HVAC and various industrial applications. Kelvion heat exchanger coils are manufactured with copper tubes and aluminum or copper fins. The fins are equipped with special profiles developed at our R&D department enhancing heat transfer and keeping pressure drop at a moderate level. The customized fin spacing is achieved by collars which also provide the contact between the fin block and the tubes. Mechanical expansion of the tubes guarantees a perfect bond between the fins and the tubes leading to maximum heat transfer between both fluids.
Request for a quoteARUP ALU-ROHR UND PROFIL GMBH
Germany
We take pride in bringing new technology to the market to better serve our customers. Whether you need a tube that hasn’t been made before or need help working through a challenging design requirement, we’re here to help. Our custom engineering services include a prototype mill and an in-house tool shop to design and produce customized roller sets tailored to the requirements of your special tube profile. Tell us a little bit about your project, and let’s get started.
Request for a quoteARUP ALU-ROHR UND PROFIL GMBH
Germany
With walls as thin as 0.26 mm, we design radiator tubes with superior strength, performance, and cost-efficiency at a very compact size and drastically reduced weight. All our aluminum radiator tubes are HF-seam welded and made in our state-of-the-art facilities in Montgomery, Alabama, and Dortmund, Germany. Many of our tubes have been used by some of the world’s most respected engine manufacturers, from racing to complex industrial applications. • Profiles from 13 mm to 52 mm in tube height • Multiple-chambered, dimpled, and end-free tube technologies • Metal strip gauges as thin as 0.26 mm • A wide array of aluminum alloys available TUBE TECHNOLOGIES. Dimpled For high-performance radiators and heater cores to increase the turbulence of the fluid and heat transfer by breaking the boundary layers inside the tubes. Multiple-chamber End-free
Request for a quoteResults for
Aluminium tubes - Import exportNumber of results
32 ProductsCompany type