Air transport - Import export

These two-blade rotary blowers work on the Roots principle. They ensure the oil-free transport of air and almost all technical gases.

IDS 80 OIL HEATER FANThe robust IDS 80 oil fan heater for fast, uncomplicated heating - mobile heating power on wheels This oil heater fan of the IDS pro series is especially suitable for longer heating applications, because it is possible to connect an external oil tank in addition to the integrated fuel container. The double-walled housing with protective coating ideally absorbs sound, minimizes surface temperature and thus the risk of injuries. Electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling are further safety measures. The carriage and big wheels provide sufficient flexibility. Especially when working on building sites, the location can simply be changed. The oil heater fan IDS 80 further comes with a connection facility for an air transport hose and a two-way hose distributor.

Wherever condensation free warmth is needed without long air transportation ways, on site and immidately effective, the favourable electric heating units of the TDS R series are best choice. Because in comparision to direct fired gas or oil heaters dont consume oxygen and produce no combustion gases, they are well suited for temperature management of unheated inside rooms, workshops or garages. Thanks to the integrated thermostat control the produced warm air flow can be adjusted continuously to the desired temperature. If needed, the heating elements of the TDS 30 R switch on thermostatic controlled additional to the constant fan. Benefits in practise: Multistage temperature control with up to 3 heating stages Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 30 R is suitable for uses in enclosed rooms Easy transportable and easy to use

Stainless steel desiccant dehumidifier TTR 250 HP Special design for particularly long air transport distances ... The TTR 250 HP is not only standard-equipped with a radial fan but also with an additional extra-powerful fan motor which allows an especially high compression. This makes this dehumidifier especially well-suited for applications where air has to be transported over long distances or several levels, for example ships’ rooms, cellars or bunkers. The standard ex factory configuration of the TTR 250 HP is designed for the transportation of moist air. The dryer can be set by the customer to a different configuration, should the need arise for high-pressure dry air to be conducted away instead of moist. With the TTR 250 HP you can benefit from a professional desiccant dehumidifier originally produced by Trotec which has been developed and manufactured according to the highest of quality standards in Germany.

Everywhere where condensation-free warmth without long air transport routes is needed with immediate effect, the inexpensive TDS-R electric fan heaters are the optimal choice. Thanks to the integrated thermostat the produced warm airstream can be adjusted stepless to the desired temperature. The thermostat controlled heating elements of the TDS 50 R switch on the permanent fan, if needed. Some technical details about the TDS 50 R electric fan heater: Heating performance stage 1: fan only Heating performance stage 2: 4,5 kW Heating performance stage 3: 9 kW Air flow rate: 844 m³/h Fan stages:1 Power consumption: 13 A Supply voltage: 400 V / 50 Hz Power connector: CEE 16 A, 5-pole Connection cable: integrated (length 1.6 m) Thermostat: integrated Mobility: portable Noise level: 56 dB (A) Overheat protect: existing Dimensions (l x w x h): 315 x 250 x 370 mm Weight: 6,5 kg

The TTV 3000 is a real whirlwind on every construction site. This unit is a true professional: distinctive German industrial design with built-in carrying handle, shock-protected switch and stackable polyethylene housing. And all other features of the TTV 3000 are nothing to hide either. With its high-performance, encapsulated fan, this conveying fan which is as robust as lightweight can variably transport fresh air over long distances into adjacent storeys or shafts and exhaust polluted air over equally long distances. Those are ideal conditions for the required air exchange rates for ventilation during channel construction works or welding. Hoses of up to 38 metres in length can flexibly be attached to the blow-out or suction side of the TTV 3000 because this axial fan is equipped with the respective connections on both sides.

HIGH-PERFORMANCE ELECTRIC HEATING UNIT TEH 400Powerful heating without flames, smoke or condensation: With the electric heating unit TEH 400 At present, this extraordinarily robust heating unit of German high-quality manufacturing is probably the world's most powerful mobile electric heating device on the market! You require extremely large-volume, fully smoke-, flame- and condensate-free amounts of warm air – for instance for blasting, coating and painting work or load tests? If so, the high-performance electric heating unit TEH 400 is our best recommendation: This hot air giant can withstand the harshest conditions whilst producing up to 9,000 cubic metres of hot air per hour at an air pressure of up to 600 Pa in continuous operation. Owing to this capacity, the high-performance heating device can transport hot air via air hose distances of up to 100 metres length.

ORBIS reusable bulk containers are designed to protect and transport heavy parts in automotive and industrial applications. Engineered for rugged applications, the plastic bulk containers are extremely robust and offer comprehensive product protection over a long service life. The 1200 x 1000 plastic bulk containers are available in multiple heights for increased packing density. The collapsible design with a return ratio of up to 1 : 3 reduces the shipping of air during return transport to a minimum. Key features: - manufactured from recycled material - multiple heights, access door and bottom configurations - durable all-plastic design - improved workplace safety - easy, on-site repair and part replacement - 100% recyclable

Wear-protected industrial fans. Wear-protected industrial fans Solids are often transported with the air that are very abrasive (e.g. corundum, sand, quartz, wood). These solids lead to considerable wear, in particular of the fan impeller. Progressive loss of material takes place, which can lead to machine failure. By means of specific measures to prevent wear, the service life of the fan can be extended. In addition to a suitable blade geometry, austenitic manganese steels and build-up welds can be used to counteract impact and sliding wear.